Wilwood 220-10841 SS Braided Front Flexline Kit SL6 for 2000-2009 Honda S2000

Vehicle Fitment

• 2000-2009 Honda S2000 (All Trims, Front Position - for use with Wilwood SL6 Front Brake Kit)

Fitment Notes

• Designed for use with Wilwood's Superlite 6 (SL6) front brake kit on the Honda S2000 - NOT a direct OE rubber hose replacement for stock calipers
• Requires Wilwood SL6 front brake kit to be installed - confirm caliper inlet thread is 1/8-27 NPT before ordering
• Chassis fitting accepts M10 x 1 inverted flare (IF) or M10 x 1 banjo fitting (BF) - verify chassis hard line thread before installation
• Line bracket #250-8361 is recommended for proper hose routing and retention (sold separately)
• Kit contains 2 flexline hoses - one for each front caliper

Features

• Stainless steel braided construction provides superior durability and resistance to abrasion, heat, and corrosion
• -3AN line size delivers a firmer, more consistent pedal feel compared to OE rubber hoses
• 90° caliper fitting angle provides a clean, low-profile connection at the caliper inlet in tight wheel well clearances
• Straight chassis fitting simplifies connection to the OE hard brake line at the chassis junction
• Application-specific design ensures correct length and fitting configuration for the S2000 front brake package
• All required fittings included - no additional adapters needed for standard SL6 kit installation
• Wilwood-recommended replacement for OE rubber hoses when upgrading to Wilwood front brake kits
• Precision-manufactured to Wilwood's high quality standards for performance and reliability

Specifications

• Position: Front
• Application: 2000-2009 Honda S2000 - Wilwood SL6 Front Brake Kit
• Flexline Length: 18.00 in.
• Line Size: -3AN
• Inlet Fitting: -3 Female, Straight
• Outlet Fitting: -3 Female, 90 Degree
• Caliper Fitting Angle: 90 Degree
• Caliper Fitting Thread: 1/8-27 NPT
• Caliper Fitting Part No.: 220-13125
• Chassis Fitting: M10 x 1 Inverted Flare (IF) or M10 x 1 Banjo Fitting (BF)
• Chassis Fitting Part Nos.: 220-6413 / 220-6890
• Recommended Line Bracket: 250-8361 (sold separately)
• Weight: 0.80 lbs. (per hose)
• UPC: 889545044553

Included Components

• 2x Stainless Steel Braided Flexline Hoses - 18.00 in., -3AN (one per front caliper)
• 2x 90° Caliper Fittings (1/8-27 NPT) - #220-13125
• 2x Chassis Fittings (M10 x 1 IF or BF) - #220-6413 / 220-6890

Product Description

The Wilwood 220-10841 is an application-specific stainless steel braided flexline kit engineered for the front SL6 (Superlite 6) brake kit installation on 2000-2009 Honda S2000 models. Each kit includes two 18.00" -3AN hoses with a 90° caliper fitting (1/8-27 NPT) and a straight chassis fitting (M10 x 1), providing all hardware needed to connect the Wilwood SL6 calipers to the OE chassis hard line. The stainless braid delivers a firmer, more direct pedal response compared to OE rubber hoses, while resisting heat, abrasion, and corrosion over the long term.

This flexline kit is not compatible with OE Honda S2000 stock calipers - it requires a Wilwood SL6 front brake kit to be installed. The chassis fitting accommodates both M10 x 1 inverted flare and banjo fittings, but the chassis hard line thread must be verified before installation. Line bracket #250-8361 is recommended for proper hose routing and is sold separately.