Whiteline KTA301 Front UCA for 2005-2026 Frontier/Xterra, 2005-2013 Pathfinder

Vehicle Fitment

• 2005-2026 Nissan Frontier - XE, SE, LE, Nismo Off-Road, S, SV, SL, Desert Runner, PRO-4X, PRO-X; 4.0L V6 on 2005-2019 D40 applications and 3.8L V6 on 2020-2021 D40 applications; 2WD/4WD where applicable
• 2006-2015 Nissan Xterra - X, S, SE, Off-Road, PRO-4X; 4.0L V6; 2WD/4WD where applicable
• 2005-2013 Nissan Pathfinder R51 - XE, S, SE, SE Off-Road, LE, Silver Edition, SV; 4.0L V6; 2WD/4WD where applicable
• 2015-2025 Nissan Navara D23/NP300 - 2.3L I4 diesel; 4WD; coil-spring and leaf-spring rear configurations
• 2005-2015 Nissan Navara D40 - 2.5L I4 diesel, 3.0L V6 diesel or 4.0L V6 gasoline; 4WD

Fitment Notes

• Position: Front upper control arms.
• Supplied as a matched pair for the left and right front suspension.
• Fixed-offset alignment design; the arms are not on-car adjustable.
• Designed for vehicles lifted approximately 30-70 mm (1.2-2.8 inches).
• At approximately 50 mm (2 inches) of lift, the design provides approximately +2.5° to +3.5° caster and up to 1.5° additional negative camber adjustment.
• Front wheel alignment is required after installation.
• Compatibility is dependent on the correct D40/D23/R51 front suspension configuration.
• For 2022-2026 Frontier applications, the current Whiteline catalog identifies KTA301 with the D41 Frontier platform; verify the exact vehicle configuration before installation.
• Pathfinder R51 fitment is documented through 2013.
• Navara D23/NP300 fitment is limited to 4WD configurations identified by Whiteline.

Features

• Fixed-offset front upper control arm alignment kit.
• Designed to correct caster and camber geometry on lifted Nissan vehicles.
• Provides approximately +2.5° to +3.5° additional caster at approximately 50 mm of lift.
• Provides up to approximately 1.5° additional negative camber adjustment.
• Improves front suspension geometry after installation of a suspension lift.
• Increases clearance between the upper control arm and coil-over/strut assembly.
• Improves ball-joint articulation through increased suspension travel.
• Whiteline GIIRO bushing technology provides low-friction suspension articulation.
• Maintenance-free bushing design eliminates routine bushing lubrication requirements.
• Synthetic elastomer bushing construction resists oil, grease, ozone and weathering.
• Fixed-offset geometry provides a consistent alignment correction without on-car arm adjustment.
• Powder-coated arm construction provides increased corrosion resistance.
• Designed for lifted street, towing and off-road applications.
• Includes integrated ball joints for the complete upper-control-arm assembly.

Specifications

• Brand: Whiteline
• Part Number: KTA301
• Product Type: Fixed-Offset Front Upper Control Arm Kit
• Position: Front Upper
• Quantity: 2x Arms
• Alignment Type: Caster/Camber Correction
• Adjustment Type: Fixed Offset
• On-Car Adjustable: No
• Ball Joints Included: Yes
• Recommended Lift Range: 30-70 mm (approximately 1.2-2.8 inches)
• Caster Gain: Approximately +2.5° to +3.5° at approximately 50 mm lift
• Negative Camber Gain: Up to approximately 1.5° at approximately 50 mm lift
• Bushing Technology: GIIRO Maintenance-Free
• Fitting Position: Front Axle
• Installation Time: Approximately 3 hours
• Wheel Alignment Required: Yes
• Kit Required: 1x per vehicle
• EAN: 9319924469512

Included Components

• 2x Fixed-Offset Front Upper Control Arms
• 2x Integrated Ball Joints
• 1x Installation Guide
• 1x Assembly Grease Supply

Product Description

The Whiteline KTA301 is a fixed-offset front upper control arm kit engineered for Nissan Frontier, Xterra, Pathfinder, Navara D40 and Navara D23/NP300 applications. The arms are designed for vehicles lifted approximately 30-70 mm and restore useful front suspension alignment range that can be lost as ride height increases. At approximately 50 mm of lift, Whiteline specifies approximately +2.5° to +3.5° of additional caster and up to 1.5° of additional negative camber.

The fixed-offset design also increases clearance around the coil-over or strut assembly and improves upper-ball-joint articulation through suspension travel. Whiteline's GIIRO maintenance-free bushing technology is engineered for low-friction movement while resisting oil, grease, ozone and weathering. The arms use a durable powder-coated finish and include integrated ball joints for a complete front upper-control-arm replacement.

KTA301 is documented for 2005-2026 Nissan Frontier applications, 2006-2015 Nissan Xterra, 2005-2013 Nissan Pathfinder R51, 2005-2015 Nissan Navara D40 4WD and 2015-2025 Nissan Navara D23/NP300 4WD applications. Engine and drivetrain availability varies by platform and year. The kit contains two arms, is installed at the front axle, and requires a front wheel alignment after installation.