Vibrant 1417 T304 SS T6 Turbo Inlet Flange 1/2 in. Thick M10x1.5 Universal

Vehicle Fitment

• Universal - Compatible with T06 (T6) frame turbochargers requiring a standard 4-bolt inlet flange connection.

Fitment Notes

• Designed to fit T06 turbocharger inlet configurations. Confirm bolt pattern and port dimensions match your specific turbo before ordering.
• Bolt hole thread size: M10 x 1.5. Verify thread spec matches your turbocharger housing.
• Matching graphite gasket available separately under part number 1417G.
• Also available in mild steel as part number 14170.

Features

• T304 stainless steel construction resists warping, corrosion, and heat from sustained turbocharger operation
• 1/2 in. (0.500 in.) thick flange prevents distortion and sealing failures under high exhaust heat cycles
• Precision laser cut and CNC machined for accurate port and bolt hole alignment to T6 turbo specifications
• Pre-tapped bolt holes (M10 x 1.5) simplify installation without requiring separate hardware preparation
• Optimized port sizing matched to T6 turbo inlet geometry for unrestricted flow
• Machined mating surface ensures a tight, leak-free seal against the turbocharger housing
• Suitable for turbo inlet, manifold-to-turbo, and custom header fabrication applications
• Backed by Vibrant's 1-year limited warranty

Specifications

• Part Number: 1417
• Material: T304 Stainless Steel
• Turbo Fitment: T06 (T6) Frame
• Flange Type: Turbo Inlet
• Flange Thickness: 0.500 in. (1/2 in.)
• Bolt Hole Thread Size: M10 x 1.5
• Bolt Hole Center Height (BHCCH): 69.9 mm
• Bolt Hole Center Width (BHCCW): 112.75 mm
• Overall Height: 95.9 mm
• Overall Width: 136.7 mm
• Port Height: 60.5 mm
• Port Width: 87.5 mm
• Finish: Machined
• Matching Gasket: Vibrant 1417G (sold separately)
• Warranty: 1 Year Limited Warranty

Included Components

• 1x Vibrant 1417 T6 Turbo Inlet Flange, T304 Stainless Steel, 1/2 in. Thick

Product Description

The Vibrant 1417 is a T304 stainless steel turbo inlet flange designed for T06 (T6) frame turbochargers. At 1/2 in. thick, the flange resists the warping that thinner flanges are prone to under repeated heat cycling from turbo operation. The pre-tapped M10 x 1.5 bolt holes and precision CNC-machined port geometry ensure accurate, leak-free alignment to the T6 turbo housing without additional fitment work.

This flange is the foundation for custom exhaust manifold and turbo inlet builds on T6-equipped platforms. It is compatible with a wide range of manifold fabrication styles and pairs directly with the Vibrant 1417G graphite inlet gasket (sold separately) for a complete sealing solution. Available in mild steel as part number 14170 for cost-sensitive builds where stainless is not required.