Turbosmart TS-19-SC3P-8280 8280C TS-1 Pro Supercore Turbocharger

Vehicle Fitment

• Universal performance/motorsport application; no vehicle-specific year, make, model, trim, engine, or drivetrain fitment assigned.

Fitment Notes

• This is a universal TS-1 8280C Pro Supercore and is not a vehicle-specific replacement turbocharger.
• Final compatibility depends on the engine, exhaust manifold, turbine housing, wastegate arrangement, intake plumbing, oil feed, and oil drain configuration.
• The 8280C platform is available with T4 and V-Band turbine inlet configurations, with applicable A/R options depending on the selected housing.
• Externally wastegated TS-1 configurations require a compatible external wastegate system.
• Do not assign vehicle-specific fitment without confirming the complete turbocharger-system configuration.

Features

• TS-1 Pro 8280C supercore turbocharger design.
• Designed for high-performance and motorsport applications.
• Ultra-low rotating mass promotes rapid transient response.
• Aggressive compressor aerodynamics support high airflow at elevated engine loads.
• 7+7 2618 aluminum splitter-wheel compressor design.
• 713C Inconel turbine wheel is engineered for extreme exhaust-gas temperatures.
• Proprietary dual ceramic bearing system supports high-speed turbocharger operation.
• VSR speed-balanced rotating assembly promotes smooth operation.
• Lightweight 310S stainless-steel investment-cast turbine housing technology.
• Lightweight aluminum compressor-cover construction.
• CFD-driven housing design is optimized for airflow and turbine A/R characteristics.
• Integrated iron backplate is incorporated into the center-housing assembly.

Specifications

• Brand: Turbosmart
• Part Number: TS-19-SC3P-8280
• Product Type: TS-1 8280C Pro Supercore Turbocharger
• Frame: C Frame
• Cooling: Oil cooled
• Compressor Inlet: 4 in (101.6 mm)
• Compressor Inducer: 82.8 mm
• Compressor Exducer: 106 mm
• Turbine Inlet: T4 or V-Band, depending on housing configuration
• Turbine Outlet: 3 in (76.2 mm)
• Turbine A/R Options: 0.96 and 1.24, depending on housing configuration
• Drain Bolt Spacing: 50.8 mm
• Horsepower Rating: 1,225-1,445 HP
• Bearing System: Proprietary dual ceramic
• Application: Universal performance/motorsport

Included Components

• 1x Turbosmart TS-1 8280C Pro Supercore

Product Description

The Turbosmart TS-19-SC3P-8280 is a TS-1 8280C Pro Supercore designed for high-output performance and motorsport applications. The 82.8 mm compressor inducer and 106 mm compressor exducer provide a high-flow compressor platform, while the low rotating mass and aggressive compressor aerodynamics are designed to deliver strong transient response without sacrificing high-load airflow.

The 8280C incorporates a 7+7 2618 aluminum splitter-wheel compressor, 713C Inconel turbine wheel, proprietary dual ceramic bearing system and VSR-balanced rotating assembly. Turbosmart uses lightweight 310S stainless-steel investment-cast turbine housing technology, an aluminum compressor cover and CFD-driven housing development. The 8280C is rated for approximately 1,225-1,445 HP depending on the complete configuration and engine application.

This part is a universal supercore rather than a vehicle-specific turbocharger, so no year/make/model fitment is assigned. Final installation requires a compatible turbine housing and supporting components, including the appropriate exhaust manifold, external wastegate system, intake connections, oil feed and oil drain. Proper engine calibration and supporting modifications are required for a turbocharger system operating at this performance level.