Skyjacker 7110 Hydro 7000 Single Steering Stabilizer Kit Straight Axle 4WD

Vehicle Fitment

The Skyjacker 7110 is a universal single steering stabilizer kit designed for straight-axle 4WD vehicles. It is compatible with a broad range of makes, models, and axle configurations, including but not limited to:

• All Dana 44 and Dana 66 straight-axle 4WD applications
• All Dana 60 straight-axle 4WD applications (up to 3" O.D. tie rod)
• 1966-1975 Ford Bronco (4WD)
• 1959-1979 Ford F250/F350 (4WD)
• 1971-1976 Ford F150 Pickup (4WD - no factory OEM stabilizer location)
• 1986-1998 Ford F350 Straight-Axle Pickup (4WD)
• 1945-1993 Dodge Power Wagon (4WD)
• 1974-1993 Dodge Ramcharger (4WD)
• 1967-1975 International Scout / Scout II (4WD)
• 1976-1983 Jeep CJ-5 / CJ-7 (alternate or non-factory stabilizer location)
• 1981-1985 Jeep CJ-8 Scrambler (alternate or non-factory stabilizer location)

Confirm tie rod diameter and mounting clearance before ordering. Verify fitment with Skyjacker's current catalog or technical support for your specific application.

Fitment Notes

• Straight-axle 4WD only - the 7110 is designed for vehicles with a solid front axle and conventional steering linkage (drag link / tie rod configuration); it is not applicable to independent front suspension vehicles
• Universal bracket kit - unlike the model-specific 7001 (CJ-5/CJ-7/Scrambler OEM replacement) and 7009 (YJ/TJ/XJ/ZJ/MJ OEM replacement), the 7110 is a universal single kit with its own bracket hardware that mounts to the tie rod and axle/frame; it is used on vehicles that either were not originally equipped with a factory steering stabilizer or for applications where an alternate stabilizer mounting position is desired
• Tie rod diameter consideration - verify that your vehicle's tie rod outer diameter falls within the bracket's clamp range before ordering; the eBay fitment notes specify Dana 60 applications with up to 3" O.D. tie rods; confirm compatibility for other axle applications
• Complete hardware kit - the 7110 includes the stabilizer cylinder, mounting bracket(s), and all hardware required for installation; factory mounting bolts may or may not be reused depending on the specific application; review the included installation instructions for the hardware sequence specific to your vehicle
• Limited Lifetime Warranty - Skyjacker covers steering stabilizers with a limited lifetime warranty to the original purchaser for the duration of vehicle ownership; warranty is voided by competition or racing use; one-year warranty only for commercial vehicles

Features

• Hydro 7000 twin-tube hydraulic construction - the 7110 uses Skyjacker's Hydro 7000 series twin-tube architecture, the same platform used across Skyjacker's full steering stabilizer line; calibrated valving controls the damping force applied to the steering linkage in response to shimmy, road feedback, and large-tire gyroscopic inputs; the twin-tube design provides a hydraulic fluid reservoir that allows the unit to handle sustained damping loads without aeration or fade, appropriate for the demanding duty cycle of a solid-axle 4WD on rough terrain
• White cylinder with red polyurethane boot - the 7110 uses the same white cylinder body and red polyurethane dust boot as the 7009 (YJ/TJ/XJ/ZJ series); the red boot is Skyjacker's visual identifier for Hydro 7000 series steering stabilizers on applications beyond the CJ-5/CJ-7 platform (which uses a white boot on the 7001); the polyurethane boot material resists UV degradation, oil contamination, and the mechanical abrasion from trail debris far better than rubber
• Universal straight-axle applicability - the 7110's bracket design and stabilizer cylinder dimensions are engineered to the common mounting geometry found across Dana 44, Dana 60, and Dana 66 straight-axle applications; this universality means a single part number covers the steering stabilizer needs of a wide range of classic 4WD trucks, pickups, and off-road vehicles from multiple manufacturers and decades of production that share the same fundamental axle and steering linkage architecture, even when those vehicles were never equipped with a factory stabilizer at all
• Addresses shimmy and highway harshness on classic 4WD trucks - solid-axle trucks and SUVs across all the listed manufacturers share the same fundamental susceptibility to steering shimmy and road feedback that affects all straight-axle 4WD vehicles; the physics are the same regardless of badge - gyroscopic precession from large tire masses, the long lever arm of the drag link and tie rod, and worn steering components all contribute to steering oscillation that the 7110 damps; for vehicles like the early Ford F250/F350 and Bronco, and the Dodge Power Wagon and Ramcharger, which were designed before quality aftermarket steering stabilizers were available, the 7110 adds a category of steering control that was simply not present from the factory
• Reduces driver fatigue - on long-distance driving or extended off-road use, the physical workload of managing an unstabilized solid-axle steering system is meaningful; the 7110 reduces the corrective input force required and the vibration level transmitted to the steering wheel, reducing cumulative driver fatigue over time

Specifications

• Part Number: 7110
• Brand: Skyjacker Suspensions
• Product: Hydro 7000 Series Single Steering Stabilizer Kit
• Series: Hydro 7000
• Construction: Twin-tube hydraulic
• Cylinder Color: White
• Boot: Red polyurethane
• Configuration: Single
• Application Type: Universal - straight-axle 4WD (Dana 44, Dana 60, Dana 66 and compatible applications)
• Hardware: Bracket and mounting hardware included
• Quantity: 1 stabilizer kit per order
• Warranty: Limited Lifetime (original purchaser, duration of vehicle ownership)

Included Components

• 1x Skyjacker Hydro 7000 Steering Stabilizer Cylinder (white with red polyurethane boot)
• Mounting bracket(s)
• Installation hardware

Product Description

The Skyjacker 7110 is the Hydro 7000 Series Single Steering Stabilizer Kit for straight-axle 4WD vehicles - a universal single kit designed for the broad range of solid-axle trucks, pickups, and 4WD SUVs built around Dana 44, Dana 60, and Dana 66 axles. Where the model-specific 7001 and 7009 are direct OEM replacement kits for specific Jeep platforms in their factory mounting locations, the 7110 is a universal kit with its own bracket hardware, applicable across the wide array of solid-axle applications from Ford, Dodge, International, and Jeep that share the same fundamental steering linkage architecture.

The 7110 uses Skyjacker's Hydro 7000 twin-tube hydraulic construction with a white cylinder and red polyurethane boot, providing steering shimmy damping and highway harshness reduction for applications ranging from classic Ford Broncos and F-Series trucks to Dodge Power Wagons and Ramchargers and International Scout platforms. For vehicles like the early Ford F150 or F250/F350 that were not originally equipped with a factory steering stabilizer mounting location, the 7110's bracket hardware provides the attachment point needed to install a stabilizer for the first time. For Dana 60-equipped applications, confirm tie rod outer diameter is within the bracket's clamp range before ordering.

Hardware included. Limited Lifetime Warranty to the original purchaser. Verify fitment for your specific axle and vehicle configuration before ordering.