Race Star 601-1434-10 14mmx1.5 Open End Lug Nut Kit Dodge Challenger Charger

Vehicle Fitment

Designed for use with Race Star 92 Drag Star and 82 Pro Lite Deluxe wheels installed on Dodge Challenger and Dodge Charger vehicles equipped with 14mm x 1.5 right-hand thread wheel studs. The 71.5mm hub centric rings included in this kit are sized for the Challenger and Charger hub bore.

Fitment Notes

• Designed specifically for Race Star 92 Drag Star and 82 Pro Lite Deluxe wheels - the shank (mag-style) lug nuts and centered washers in this kit are matched to the flat-mounting-surface lug holes in these Race Star wheel designs; do not use standard conical/tapered seat lug nuts with these wheels, as they require the flat shank-style seat to clamp correctly against the washer without damaging the wheel face
• Thread size: M14 x 1.5 right-hand thread - fits Dodge Challenger and Charger wheel studs; verify your specific vehicle's wheel stud thread specification before ordering
• Hub centric rings included: 71.5mm - sized for the Dodge Challenger/Charger hub center bore; verify hub bore diameter of your specific vehicle if in doubt; incorrect hub ring sizing will prevent proper hub centering
• 10-pack - sufficient hardware to mount one 5-lug wheel with two valve stems and two hub rings; a full vehicle installation (4 or 5 wheels) requires 2 to 2.5 kits; purchase the 20-pack (601-1434-20) for a complete 4-wheel installation with spare hardware
• Chrome thin wall socket included - the 7/8" thin wall socket is required to properly torque these lug nuts within Race Star wheel pocket recesses; standard sockets may be too thick to fully seat in the wheel pockets

Features

• Open end lug nut design - the open end allows the wheel stud to pass fully through the lug nut, providing maximum thread engagement depth; open end lug nuts are preferred in high-load drag racing and performance applications where maximum clamping force is required; the 1.38" shank engages deeply into the wheel face for maximum support
• Shank (mag-style) seat - Race Star's 92 Drag Star and 82 Pro Lite Deluxe wheels use flat-bore lug holes rather than tapered/conical seats; the shank-style lug nut secures the wheel using the flat face of the centered washer against the wheel's flat mounting surface, distributing clamping load evenly across the washer contact area; this is the correct and required seat style for these wheels
• Centered washers - the 10 centered washers included with the lug nuts provide the clamping interface between the lug nut face and the wheel; the washers are sized to center within the wheel's lug holes to maintain concentricity and distribute clamp load evenly; using these wheels without the proper washers risks uneven clamping, wheel damage, and lug nut loosening
• Hub centric rings - the 71.5mm rings center the wheel on the vehicle's hub center bore, ensuring the wheel runs on-center rather than relying solely on the lug nuts for centering; hub centric mounting prevents vibration and reduces lug nut cyclic loading that occurs when a wheel is stud-centric rather than hub-centric; two rings are included (front or rear axle)
• Chrome valve stems - two chrome valve stems are included for replacement during wheel installation; the chrome finish matches the Race Star wheel aesthetic and provides a clean, consistent appearance at the wheel rim
• Chrome thin wall socket - the included 7/8" hex thin wall socket is specifically sized and profiled to fit within the recessed lug nut pockets of Race Star wheels; a standard-wall socket of the same hex size will not fit in the pocket depth and cannot be used to properly torque the lug nuts; the chrome finish matches the overall hardware presentation
• Complete installation hardware in one kit - everything required to mount one Race Star wheel with correct hardware is included; no additional components are needed beyond the torque wrench

Specifications

• Part Number: 601-1434-10
• Brand: Race Star Industries
• Product Type: Deluxe Wheel Installation Lug Nut Kit
• Thread Size: M14 x 1.5 (Right-Hand)
• Shank Length: 1.38" (1-3/8")
• Head/Hex Size: 7/8" (0.875")
• Lug Nut Style: Open End
• Seat Style: Shank (Mag-style flat seat)
• Hub Centric Ring Size: 71.5mm
• Compatible Race Star Wheels: 92 Drag Star, 82 Pro Lite Deluxe
• Primary Vehicle Application: Dodge Challenger, Dodge Charger
• Quantity: 10-pack
• UPC: 00887753190147

Included Components

• 10x Lug Nuts (M14 x 1.5 RH, Open End, 1.38" Shank, 7/8" Head)
• 10x Centered Washers
• 2x Chrome Valve Stems
• 2x Hub Centric Rings (71.5mm)
• 1x Chrome Thin Wall Socket (7/8" hex)

Product Description

The Race Star 601-1434-10 is the Deluxe Wheel Installation Kit for Race Star 92 Drag Star and 82 Pro Lite Deluxe wheels on Dodge Challenger and Charger applications - a complete 10-piece hardware package that includes everything needed to correctly mount one Race Star wheel. The kit is specifically engineered around Race Star's wheel design, which uses flat-bore lug holes and requires shank-style (mag-style) lug nuts with centered washers rather than the conical/tapered lug nuts used in most factory wheel installations. Using the correct seat style and washers is not optional with these wheels - conical lug nuts do not properly engage the flat lug holes and will result in uneven clamping, potential wheel damage, and safety risk.

The 14mm x 1.5 right-hand thread matches the factory wheel stud specification of the Dodge Challenger and Charger. The 1.38" shank engages deep into the wheel face for maximum thread contact, and the open end design allows the full stud length to pass through for maximum engagement. The 71.5mm hub centric rings seat the wheel precisely on the hub center bore, preventing vibration and reducing the cyclic load on the lug nuts that occurs in stud-centric installations. The included chrome thin wall socket is a critical tool component - standard socket walls are too thick to fit within Race Star's wheel pocket recesses, making this socket a required item rather than an optional accessory.

The 10-pack provides hardware for a single 5-lug wheel plus two valve stems and two hub rings for one axle position. A complete 4-wheel installation requires multiple kits; the 20-pack version (601-1434-20) provides full vehicle coverage with spare hardware. The part number suffix "-10" denotes the 10-pack quantity; the "-20" suffix denotes the 20-pack.