Race Star 601-1416D-10 1/2in Closed End Lug Nut Kit for 94-14 Ford Mustang

Vehicle Fitment

• 1994-2014 Ford Mustang (SN95 / S197 chassis)

Fitment Notes

• Does NOT fit 2015+ Mustang - that generation uses a different thread pitch and requires a different Race Star lug kit
• Required for installing Race Star Industries Direct Drill wheels on this platform - factory lug nuts will not work with Direct Drill wheels
• Kit includes enough hardware for 2 wheels (5 lug nuts per wheel)
• Also compatible with Jeep applications using the same 1/2in x 20 thread pitch and Direct Drill wheel design

Features

• Closed-end lug nut design conceals the stud end for a clean, finished look
• 1.380 in. shank length with 0.685 in. shank diameter, sized to properly seat in Race Star Direct Drill wheel lug holes
• Chrome finish for corrosion resistance and appearance
• Centered washers included for consistent, even clamping load
• Hub centric rings help ensure proper wheel centering on the hub
• Chrome thin-wall 13/16 in. socket included for easy, damage-free installation
• Complete kit eliminates the need to source separate valve stems or installation tools

Specifications

• Part Number: 601-1416D-10
• Brand: Race Star Industries
• Thread Pitch: 1/2in x 20, right hand
• End Style: Closed End
• Shank Length: 1.380 in.
• Shank Diameter: 0.685 in.
• Socket Size: 13/16 in.
• Material: Steel
• Finish: Chrome
• Quantity: 10-Pack (Half Kit)

Included Components

• 10x Chrome Closed-End Lug Nuts, 1/2in x 20
• 10x Centered Washers
• 2x Chrome Valve Stems
• 2x Hub Centric Rings
• 1x Chrome Thin-Wall 13/16 in. Socket

Product Description

The Race Star 601-1416D-10 is a complete closed-end lug nut installation kit built specifically for mounting Race Star Industries Direct Drill wheels on the 1994-2014 Ford Mustang (SN95 and S197 chassis). Standard factory lug nuts will not work with Direct Drill wheels, so this kit supplies the exact hardware Race Star requires for a proper, secure installation.

Each kit includes 10 chrome closed-end lug nuts with a 1.380 in. shank and 0.685 in. shank diameter, paired with centered washers for even clamping across the wheel face. Two hub centric rings help keep the wheel properly centered on the hub, and two chrome valve stems round out what's needed to finish a full installation across a pair of wheels.

A chrome thin-wall 13/16 in. socket is included specifically sized to work with these lug nuts, making installation straightforward without hunting for a compatible tool. This kit is for the 10-pack "half kit" size, providing enough hardware for two wheels; buyers needing to outfit all four wheels should look at Race Star's 20-pack full kit instead. Owners with a 2015 or newer Mustang should note this kit will not fit, as that generation uses a different thread pitch.