Method MR31477512530 314 17x7.5 5x114.3 +30mm Matte Black Wheel Toyota Sienna

Vehicle Fitment

This wheel uses the 5x114.3mm (5x4.5") bolt pattern - one of the most widely shared bolt patterns in the automotive industry, covering a broad range of cars, crossovers, SUVs, minivans, and light trucks. Representative fitment includes:

• Toyota Sienna (All Generations), Highlander, Camry, RAV4, Avalon, C-HR, Mirai
• Lexus ES, GS, IS, NX, RC, RX
• Nissan Altima, Maxima, Murano, Pathfinder, Rogue, Sentra, 370Z, Juke
• Honda Accord, CR-V, HR-V, Civic, Insight, CR-Z
• Hyundai Elantra, Ioniq, Kona, Palisade, Santa Fe, Sonata, Tucson, Veloster
• Kia Cadenza, Forte, K5, Niro, Optima, Seltos, Sedona, Sorento, Soul, Stinger, Telluride
• Ford Explorer, Flex, Taurus
• Mazda3, Mazda6, MX-5 Miata, CX-30, CX-5, CX-7, CX-9, RX-8
• Subaru Ascent, Forester, Impreza, Legacy, Outback, WRX
• Mitsubishi Eclipse, Lancer Evo, Outlander
• Tesla Model 3
• 1984-2006 Jeep Cherokee XJ, Grand Cherokee ZJ, Wrangler YJ and TJ

Fitment Notes

• 5x114.3mm is also expressed as 5x4.5" - both designations refer to the same bolt pattern
• 73mm centerbore is hub-centric for Toyota Sienna, Highlander, Camry, RAV4, and most listed Toyota and Lexus applications; hub bore varies across the full range of compatible vehicles - verify your specific vehicle's hub bore before installation; hubcentric rings may be required for vehicles with smaller hub bores
• +30mm offset / 5.5" backspacing is a moderately positive inboard stance - appropriate for the crossover, minivan, SUV, and car applications this bolt pattern is primarily used on; confirm clearance for your specific vehicle, trim, and tire combination before ordering
• The 17x7.5 width is narrower than typical truck aftermarket wheels and is sized appropriately for the crossover and SUV applications that predominantly use this bolt pattern; recommended tire widths are 215-245mm depending on the application
• Lug nut specifications vary significantly by vehicle - thread pitch, seat type, and length differ across Toyota, Nissan, Honda, Hyundai/Kia, Ford, Mazda, Subaru, and Mitsubishi applications; confirm the correct lug nut specification for your specific vehicle before purchasing separately; lug nuts are not included
• TPMS sensors are not included - purchase separately if required
• Sold individually - one (1) wheel per listing

Features

• Rally Raid / Dakar Rally-inspired 16-spoke design - the MR314 is Method's most utilitarian and motorsport-specific street series design, drawing directly from the purpose-built multi-spoke wheels used in long-distance off-road rally competition; the 16-spoke layout provides uniform structural support across the wheel face, and the design aesthetic is deliberately functional and mechanical rather than decorative
• Machined weight-saving pockets in the outer lip with "Method" embossed text - the lip pockets reduce unsprung weight while adding visual interest to the outer profile; the embossed METHOD text in the pocket is a subtle branding element unique to the 314 design
• Slightly arched spoke faces with a deeply recessed bolt circle - the arched spoke geometry gives the wheel a three-dimensional, forged-wheel appearance; the recessed bolt circle adds visual depth to the center section and partially conceals the lug hardware for a cleaner overall look
• Snap-in center cap with embossed METHOD logo - the 314 uses a snap-in cap design; additional snap-in cap options are available separately
• All-matte black finish delivers a flat, non-reflective appearance that pairs well with the wide range of vehicle colors and styles in the 5x114.3 fitment range - from neutral silver and white crossovers to performance-oriented dark-colored sedans and SUVs
• Hub-centric fitment at 73mm centerbore on Toyota, Lexus, and most listed Japanese-brand applications - precise wheel centering from the factory hub on these platforms without additional hardware
• Solid one-piece cast A356 aluminum construction with T6 heat treatment provides reliable structural performance across all listed car, crossover, SUV, and minivan applications
• 2,650 lb. load rating for this 5-lug 5x114.3 configuration - appropriate for all standard crossover, SUV, minivan, and sedan payloads within the rated capacity
• 26.01 lb. wheel weight - a practical weight for a 17x7.5 5-lug wheel used across the range of primarily daily-driven applications in this bolt pattern
• DOT street-legal - suitable for all on-road, daily-driven, and mixed-use applications on all listed vehicles
• Covered by Method Race Wheels' Lifetime Structural Warranty

Specifications

• Part Number: MR31477512530
• Model: Method 314
• Finish: Matte Black
• Wheel Diameter: 17 in
• Wheel Width: 7.5 in
• Bolt Pattern: 5x114.3mm (5x4.5")
• Offset: +30mm
• Backspacing: 5.5 in
• Centerbore: 73mm
• Wheel Weight: 26.01 lbs
• Load Rating: 2,650 lbs
• Construction: One-piece cast A356 aluminum, T6 heat treated
• Center Cap: Snap-in with embossed METHOD logo (additional cap styles available separately)
• Warranty: Lifetime Structural

Included Components

• 1x Method 314 Wheel - 17x7.5, 5x114.3, +30mm, Matte Black
• 1x Snap-in center cap with embossed METHOD logo

Product Description

The Method 314 in Matte Black (P/N MR31477512530) is Method's Dakar Rally-inspired street series design in the 17x7.5 / 5x114.3 / +30mm configuration - the narrower, more positive-offset fitment that serves the broad range of crossovers, SUVs, minivans, and performance cars that use the 5x4.5 (5x114.3) bolt pattern. This is one of the most widely shared bolt patterns across the automotive industry, covering Toyota Sienna, Highlander, and Camry; Nissan Pathfinder, Murano, and Altima; Honda Accord and CR-V; Hyundai Palisade and Kia Telluride; Ford Explorer; Mazda CX-5 and CX-9; and Subaru Outback and Ascent, among dozens of others. The 73mm centerbore provides hub-centric fitment on Toyota, Lexus, and most Japanese-brand applications in this list.

The MR314's design is deliberate and purpose-specific - where most of Method's street series wheels derive their aesthetic from beadlock styling and race truck heritage, the 314 draws directly from Dakar Rally competition wheels: the 16-spoke layout creates a dense, structural-looking face with machined weight-saving pockets in the outer lip, arched spoke faces, and a deeply recessed bolt circle that gives the wheel a three-dimensional, forged appearance from every viewing angle. The embossed "Method" text in the lip pocket is subtle and integrated - this is a wheel that communicates performance through geometry rather than graphic elements or accent colors. In matte black, the design reads as clean and functional, fitting naturally across the broad range of daily-driven applications in the 5x114.3 segment from minivans to sports sedans.

Built from solid A356 aluminum with T6 heat treatment, weighing 26.01 lbs, and carrying a 2,650 lb. load rating, this wheel is well-suited for standard crossover, SUV, and sedan payloads on all listed applications. Lug nut specifications vary significantly across the vehicle range covered by this bolt pattern - confirm thread pitch and seat type for your specific vehicle before purchasing separately. Lug nuts are not included. Covered by Method Race Wheels' Lifetime Structural Warranty.