KC HiLiTES 7347 A-Pillar Ditch Light Bracket Pair for 2019-2024 RAM 2500/3500

Vehicle Fitment

• 2019-2024 RAM 2500 (5th Generation / Gen5, All Trims, All Engines)
• 2019-2024 RAM 3500 (5th Generation / Gen5, All Trims, All Engines)

Fitment Notes

• 7347 is NOT compatible with 2023+ RAM 2500/3500 models equipped with the Sport Performance Hood - the Sport Performance Hood uses a different A-pillar and hood surround geometry that prevents proper bracket installation.
• Due to OEM body panel tolerances on the Gen5 RAM 2500/3500, these ditch mount brackets may slightly accentuate hood gap spacing at the A-pillar location. Minor trimming of the plastic trim adjacent to the bracket can help prevent this, though it is not required for installation.
• 100% bolt-on installation at factory A-pillar/lower windshield bolt locations - no drilling, cutting, or modification of the vehicle is required. Factory-grade hardware is reused for installation.
• Brackets are compatible with auxiliary lights up to 6" in size using a 10mm or smaller mounting stud - including KC FLEX ERA® 4, Gravity® Titan™ 6, Slimlite LED, and compatible third-party lights within these dimensional limits.
• Lights are NOT included - 7347 is a bracket-only set. Lights and wiring must be purchased separately.
• Sold as a pair - includes both driver (left) and passenger (right) side ditch/A-pillar mounting brackets.

Features

• Specifically engineered for the 5th Generation RAM 2500/3500's A-pillar and lower windshield factory bolt pattern - precision-fit to the Gen5 truck's geometry for a seamless, flush-fitting bracket position at the ditch light location without the gaps or misalignment that result from universal bracket adapters.
• Low-profile design keeps the mounted light in the optimal ditch/A-pillar position - angled forward and outward from the lower windshield - to project light into the near-field flanking zone in front of the truck where forward-facing lights cannot reach, and where ditch lighting provides the most meaningful improvement to off-road and job-site visibility.
• Robust carbon steel construction provides the structural rigidity needed to hold auxiliary lights securely at highway and off-road speeds without flex, vibration, or bracket fatigue - a critical requirement for ditch lights, which are positioned at the end of a cantilever arm rather than flush-mounted to a flat surface.
• Durable black powder-coat finish resists corrosion, UV degradation, and surface chipping under the mechanical and environmental stresses typical of truck use - maintaining the bracket's appearance and surface protection through seasons of outdoor exposure and off-road use.
• Bolt-on installation reuses factory A-pillar hardware - no drilling, welding, or modification to the vehicle's body or trim is required. The installation process is fully reversible, allowing the brackets to be removed without leaving any permanent modification to the truck.
• Accepts a wide range of KC auxiliary lights up to 6" in size with a 10mm or smaller mounting stud, including the FLEX ERA® 4 and Gravity® Titan™ 6 - the two light models KC specifically pairs with these brackets for optimized illumination pattern on the RAM platform.
• Backed by KC HiLiTES' Adventure Further Guarantee - mechanical components (bracketry, hardware, housing) are covered for the lifetime of the product.

Specifications

• Part Number: 7347
• Product Type: A-Pillar / Ditch Light Mount Bracket Set
• Material: Carbon Steel
• Finish: Black Powder Coat
• Mount Location: A-Pillar / Lower Windshield (Ditch)
• Light Compatibility: Up to 6" auxiliary lights with 10mm or smaller mounting stud
• Installation: Bolt-on, factory locations, no drilling required
• Warranty: KC Adventure Further Guarantee - Mechanical components: Lifetime; Finish: 1 year
• Quantity: 2 (Pair - Driver and Passenger Side)
• Note: Lights not included

Included Components

• 2x Black powder-coated carbon steel A-pillar / ditch light mount brackets (driver side and passenger side)
• 1x Installation hardware kit (factory-compatible mounting hardware)

Product Description

The KC HiLiTES 7347 is a pair of precision-engineered A-pillar ditch light mounting brackets built specifically for the 5th Generation RAM 2500 and RAM 3500 (2019-2024). The brackets mount at the factory bolt locations on the A-pillar and lower windshield area of the Gen5 heavy-duty RAM, positioning a pair of auxiliary lights at the ditch light location - the narrow gap between the hood and the A-pillar that puts light into the near-field flanking zone directly ahead of and to the sides of the truck. This forward-angle coverage is the area where a truck's factory headlights provide the least illumination, and where ditch lights deliver the most practical improvement for off-road trail navigation, agricultural work, and job-site use in darkness or low-visibility conditions.

The 7347 brackets are fabricated from carbon steel and finished with a durable black powder coat, designed to handle the vibration, thermal cycling, and mechanical stress of sustained work-truck and off-road use without flex or bracket fatigue. The low-profile design keeps the mounted light tight against the A-pillar for a clean, integrated appearance that doesn't protrude excessively from the truck's body line. Installation is a fully reversible bolt-on process at factory mounting locations - no drilling, cutting, or permanent modification is required. One fitment note worth flagging: due to OEM body panel tolerances on the Gen5 RAM 2500/3500, the brackets may slightly accentuate the hood gap at the A-pillar location; minor trimming of adjacent plastic trim can address this if desired, but is not required for a functional installation. Additionally, the 7347 is not compatible with 2023+ RAM 2500/3500 models equipped with the Sport Performance Hood, as that hood's geometry conflicts with the bracket's mounting geometry.

KC specifically pairs the 7347 with the FLEX ERA® 4 and Gravity® Titan™ 6 light pods for the Gen5 RAM platform, though any auxiliary light up to 6" in size with a 10mm or smaller mounting stud is compatible. Lights, wiring harnesses, and switches are not included - the 7347 is a bracket-only set. It is backed by KC HiLiTES' Adventure Further Guarantee, which covers mechanical components including the bracketry and hardware for the lifetime of the product.