Injen SP1900BLK SP Cold Air Intake for 2011-2017 Nissan Juke 1.6L Turbo NISMO Bl

Vehicle Fitment

• 2011-2017 Nissan Juke (all trims | L4-1.6L Turbo MR16DDT | FWD & AWD)
• 2011-2017 Nissan Juke NISMO (L4-1.6L Turbo MR16DDT | FWD & AWD)

Fitment Notes

• Compatible with both standard and NISMO trims of the first-generation Nissan Juke across all model years and drivetrain configurations (FWD and AWD), all equipped with the 1.6L turbocharged MR16DDT four-cylinder engine.
• The Juke NISMO RS (higher-output version of the MR16DDT producing 211 hp) shares the same engine family and intake routing - verify fitment directly with Injen if installing on a NISMO RS variant.
• No tune required. The SP1900BLK is engineered using Injen's patented MR Technology to maintain safe air/fuel ratios throughout the powerband within the stock ECU calibration, with no check engine lights.
• CARB Exempt - CARB Executive Order D-476-8 applies to 2011-2014 model year Nissan Juke only. The 2015-2017 Juke is not covered under this CARB EO and is not legal for use on vehicles registered in California or other CARB-compliant states.
• Available in three finishes: Wrinkle Black (SP1900BLK), Polished (SP1900P), and Wrinkle Red (SP1900WR) - all share identical fitment, performance, and component specifications.
• Optional Hydroshield (black): Part #1033BLK - fits filter X-1013. Optional Hydroshield (red): Part #1033RED - recommended for wet or dusty driving conditions.

Features

• Dyno-proven performance gains of up to 15 additional horsepower and 16 lb-ft of torque over the factory airbox, verified on Injen's in-house dynamometer - substantial gains for a naturally bolt-on intake on a turbocharged platform
• Injen's patented MR (MegaRam) Technology (Patents 7,359,795 and 7,669,571) is built into the stepped internal geometry of the aluminum tube, individually tuned for the MR16DDT's airflow and boost characteristics - maximizing power output while maintaining safe air/fuel ratios and preventing check engine lights
• Air Fusion technology (Patent 7,721,669) further optimizes the airflow dynamics for consistent power delivery through the MR16DDT's boost curve
• Cold air intake design routes the filter to a cooler position in the engine bay - providing a real intake air temperature advantage over the factory airbox placement that contributes directly to the dyno-proven power gains on the turbocharged MR16DDT
• 6061-T6 aluminum intake tube provides a smooth, turbulence-free, full-diameter airflow path from the filter to the turbocharger inlet - replacing the factory plastic ducting with a precision-engineered aluminum flow channel
• Laser black wrinkle powdercoat finish delivers a bold, durable underhood appearance with long-term resistance to heat, scuffs, and corrosion
• Fully serviceable SuperNano-Web Dry air filter provides greater filtration surface area and lower restriction than the factory paper element - cleanable with compressed air and reusable indefinitely
• Aggressive MR16DDT turbo induction sound enhancement under throttle and boost - the open-element aluminum design lets the Juke's 1.6T intake and boost character come through more clearly
• Bolt-on installation replacing the factory airbox - no cutting, drilling, or permanent modification required
• Made in Pomona, California, USA
• Protected by Injen Technology's Limited Lifetime Warranty to the original purchaser against defects in material and workmanship

Specifications

• Part Number: SP1900BLK
• Series: SP (Flagship Aluminum Cold Air)
• Application: 2011-2017 Nissan Juke / Juke NISMO L4-1.6L Turbo MR16DDT (FWD & AWD)
• Intake Type: Cold Air Intake
• Tube Material: 6061-T6 Aluminum
• Tube Finish: Laser Black Wrinkle Powdercoat
• Filter Type: SuperNano-Web Dry
• Filter Color: Blue
• Replacement Filter Part Number: X-1013-BB
• Optional Hydroshield (Black): 1033BLK
• Optional Hydroshield (Red): 1033RED
• Technology: Patented MR (MegaRam) Technology + Air Fusion
• Dyno-Proven HP Gain: Up to +15 HP
• Dyno-Proven Torque Gain: Up to +16 lb-ft
• Tune Required: No
• CARB Status: CARB Exempt EO D-476-8 (2011-2014 model years only; 2015-2017 not covered)
• Made in USA (Pomona, California)
• UPC: 843115017101
• Weight: 8.0 lbs
• Package Dimensions: 36" L x 14" W x 9" H
• Warranty: Limited Lifetime Warranty (original purchaser)

Included Components

• 1x 6061-T6 Aluminum Cold Air Intake Tube (Laser Black Wrinkle Finish)
• 1x SuperNano-Web Dry Air Filter
• 1x Complete Mounting Hardware Kit (stainless steel band clamps, silicone coupler, and fasteners)
• 1x Installation Instructions

Product Description

The Injen SP1900BLK is an SP Series flagship aluminum cold air intake system engineered specifically for the 2011-2017 Nissan Juke and Juke NISMO equipped with the 1.6L turbocharged MR16DDT four-cylinder engine. It delivers dyno-proven gains of up to 15 horsepower and 16 lb-ft of torque with no tune required and no check engine lights. The SP1900BLK is the laser black wrinkle powdercoat version; polished (SP1900P) and wrinkle red (SP1900WR) finishes are also available. Buyers should note the partial CARB exemption: CARB EO D-476-8 covers the 2011-2014 Juke only - the 2015-2017 model years are not CARB-legal under this EO.

The SP1900BLK's +15 HP / +16 lb-ft gains on the turbocharged MR16DDT come from Injen's patented MR (MegaRam) Technology, individually tuned for the Juke's engine, combined with a true cold air tube routing that positions the filter in a cooler section of the engine bay. On a turbocharged engine, intake air temperature has a direct effect on boost efficiency and knock resistance - cooler, denser air allows the turbocharger to work more effectively and enables the ECU to maintain more aggressive ignition timing. The stepped internal geometry of the tube, engineered through Injen's MR Technology process, controls airflow velocity and volume at the points where the MR16DDT most benefits from improved intake flow, and the Air Fusion patents further optimize flow dynamics through the boost curve.

The 6061-T6 aluminum tube replaces the factory plastic intake ducting with a smooth, full-diameter aluminum flow channel. The SuperNano-Web Dry filter is cleanable with compressed air and never requires re-oiling. Installation is bolt-on with no cutting or drilling required. Made in Pomona, California and backed by Injen Technology's Limited Lifetime Warranty against defects in material and workmanship for the original purchaser.