Hellwig 7712 Front Sway Bar for 2011-2026 Ford F250/F350 Super Duty 4WD 1-5/16

Vehicle Fitment

• 2011-2026 Ford F-250 Super Duty (All Trims, 4WD, SRW & Dually, All Engines)
• 2011-2026 Ford F-350 Super Duty (All Trims, 4WD, SRW & Dually, All Engines)
• 2017-2026 Ford F-250 Super Duty Cab & Chassis (4WD)

Fitment Notes

• Fits 4WD configurations only - does not fit 2WD F-250 or F-350 Super Duty models.
• Fits both Single Rear Wheel (SRW) and Dually (DRW) configurations on both the F-250 and F-350.
• F-350 SRW: compatible with stock height through 6" of front lift. F-350 Dually: stock height only.
• F-250 SRW and Dually: compatible across all standard suspension configurations.
• F-250 Cab & Chassis fitment begins with the 2017 model year - does not apply to F-350 Cab & Chassis.
• This bar reuses the factory front end links - end links are not included in the kit.
• Designed for use with the factory exhaust system.
• Hellwig recommends pairing with a Hellwig rear sway bar (e.g., 7320) for a complete front-to-rear handling upgrade.

Features

• Purpose-built front sway bar engineered specifically for the 2011-2026 Ford F-250 and F-350 Super Duty platform - delivers a significant improvement in front lateral stiffness over the factory bar.
• 1-5/16" (1.313 in.) diameter solid, heat-treated 4140 chromoly spring steel - a major diameter step up over stock for dramatically better roll resistance and front-end control.
• Forged ends (not welded) for greater structural integrity at the bar tips, ensuring long-term durability under heavy towing and hauling stress cycles.
• Reduces front body lean and understeer during cornering, keeping weight more evenly distributed across all four tires for improved traction and stability.
• Effective for everyday driving, towing, loaded hauling, and commercial use - improves front-end control whether empty or at max payload.
• Reuses factory front end links for a clean, OEM-integrated installation with no aftermarket link hardware required.
• High-durometer polyurethane bushings included for superior roll resistance, reduced noise and vibration, and longer service life than rubber.
• Heat-formed as a single piece from 4140 chromoly steel - more dimensionally consistent at the bends versus cold-bent alternatives.
• Quick bolt-on installation using factory mounting locations - no drilling required.
• ISO 9001:2015 certified manufacturing at Hellwig's Visalia, California facility. Made in the USA. Backed by a Limited Lifetime Warranty.

Specifications

• Part Number: 7712
• Bar Diameter: 1-5/16" (1.313 in.)
• Bar Material: Solid, heat-treated 4140 chromoly spring steel with forged ends
• Finish: Gray Hammertone Powdercoated
• Position: Front
• Rate Type: Fixed
• Drivetrain: 4WD only
• Configuration: SRW and Dually compatible
• End Links: Reuses factory end links (not included)
• UPC: 745662077129
• Warranty: Limited Lifetime

Included Components

• 1x Hellwig 7712 Front Sway Bar (1-5/16" diameter, chromoly, gray hammertone powdercoated)
• 1x Set of high-durometer polyurethane bushings
• 1x Complete mounting hardware kit
• 1x Installation instruction sheet

Product Description

The Hellwig 7712 Front Sway Bar is a direct-fit suspension upgrade engineered for the 2011-2026 Ford F-250 and F-350 Super Duty in 4WD configurations. The factory front sway bar on these trucks is designed around a balance of ride comfort and general handling, but it underperforms when the truck is operating under towing loads, carrying heavy payloads, or being pushed through faster cornering. The Hellwig 7712 replaces it with a solid 1-5/16" heat-treated 4140 chromoly bar - a substantial diameter increase over stock - delivering a major jump in front lateral stiffness, reduced body lean through corners, and a more predictable, planted front-end feel across all driving conditions.

A notable quality distinction of the 7712 is its forged ends, rather than the welded ends found on many aftermarket alternatives. Forging produces a stronger, more structurally consistent tip that better withstands the repetitive stress of heavy towing and hauling cycles over time. The bar is engineered to retain the factory front end links, simplifying installation and maintaining a clean appearance under the truck. High-durometer polyurethane bushings are included, all mounting hardware is provided, and the installation is bolt-on with no drilling required. F-350 SRW owners can run the bar with up to 6" of front lift, while F-350 Dually fitment applies at stock height. F-250 Cab & Chassis support begins with the 2017 model year.

Fitment spans the complete 2011-2026 F-250 and F-350 Super Duty lineup across all trim levels, engine options, and both SRW and Dually configurations in 4WD. Built at Hellwig's ISO 9001:2015 certified Visalia, California facility and backed by a Limited Lifetime Warranty, the 7712 is a proven, American-made front handling upgrade for one of the most widely used Super Duty generations in production.