Enkei 460-780-6550BK PF01 MAT Racing 17x8 +50 5x114.3 75mm Matte Black Wheel

Vehicle Fitment

• Universal fitment - compatible with any vehicle running a 5x114.3 bolt pattern with a 75mm hub bore and appropriate clearance for a 17x8 +50mm wheel.
• Always verify wheel well clearance, brake caliper clearance, and fender clearance for your specific vehicle and suspension setup before purchasing.

Fitment Notes

• Bolt Pattern: 5x114.3 (5x4.50 in.) - common across Nissan, Honda, Subaru, Mazda, Hyundai, Kia, and many other makes.
• Hub Bore: 75mm - hub centric rings may be required for vehicles with a smaller hub bore to ensure a vibration-free, centered fit.
• Offset: +50mm - high positive offset well-suited for factory-replacement fitment on many JDM and domestic sport compact platforms.
• Large brake caliper clearance is engineered into the PF01 spoke design - compatible with most performance aftermarket brake kits.
• Center cap and valve stem are included with this wheel.
• Sold individually - one (1) wheel per order. A full set of four requires 4 units.
• Enkei does not guarantee fitment on all vehicle applications - always verify with a fitment tool or specialist.

Features

• MAT (Most Advanced Technology) construction combines one-piece cast wheel engineering with a rim-forming spinning process, reducing wheel weight by 10-15% compared to standard cast construction while improving rim barrel strength and density.
• Roulette-pattern grooved rim bead seat reduces the slippage ratio between tire and wheel during extreme acceleration and deceleration - the same design applied to Enkei's McLaren Formula One racing wheels.
• Wide split 5-spoke design with exposed lug nuts and subtle spoke edge detailing delivers a purposeful, race-inspired appearance across a broad range of vehicle builds.
• Generous brake caliper clearance accommodates large-diameter aftermarket calipers without modification.
• Spec-E inspected - Enkei's proprietary quality standard requires a higher drop point in impact testing and 20% more cycles in rotary bending and radial fatigue testing than JWL mandates.
• Made in Japan. Backed by Enkei's lifetime structural warranty and 1-year finish warranty.

Specifications

• Model: Enkei PF01
• Series: Racing Series
• Diameter: 17 in.
• Width: 8 in.
• Bolt Pattern: 5x114.3 (5x4.50 in.)
• Offset: +50mm
• Hub Bore: 75mm
• Backspacing: 6.47 in.
• Est. Weight: 17.24 lbs (Enkei catalog) / 16.95 lbs (actual measured)
• Finish: Matte Black (BK)
• Construction: One-Piece MAT (Cast + Rim-Forming Spinning Process)
• Spoke Style: Wide Split 5-Spoke with Exposed Lugs
• Testing Standard: Spec-E (exceeds JWL)
• Country of Origin: Made in Japan
• Warranty: Lifetime Structural / 1-Year Finish
• Quantity: Sold individually (1 wheel per order)

Included Components

• 1x Enkei PF01 17x8 +50 5x114.3 Matte Black Wheel
• 1x Center Cap
• 1x Valve Stem

Product Description

The Enkei PF01 in 17x8 +50 with a 5x114.3 bolt pattern (part number 460-780-6550BK) brings Enkei's MAT racing wheel technology into a 17-inch Matte Black fitment optimized for high-positive-offset applications. Built using the same MAT (Most Advanced Technology) process as the rest of the PF01 lineup - one-piece cast construction combined with a rim-forming spinning operation - this wheel achieves a 10-15% weight reduction over equivalent standard cast construction, arriving at approximately 17 lbs per wheel. The wide split 5-spoke layout with exposed lugs carries the PF01's hallmark race aesthetic, and the engineering intentionally provides generous spoke-to-hub clearance for large aftermarket brake calipers, making this a clean fitment across both stock and upgraded brake setups.

The roulette-pattern grooved bead seat - the same design Enkei applies to their Formula One racing wheels - reduces tire slippage at the bead during hard acceleration and braking, keeping the tire seated firmly on the rim under demanding conditions. The +50mm offset positions the wheel face set back from the hub center, making this configuration particularly well-suited for factory-replacement fitment on platforms where tight-to-fender clearance is critical. Center cap and valve stem are included. Backed by Enkei's lifetime structural warranty and 1-year finish warranty. Sold individually - order four for a complete set.