Enkei 3658956540SP NT03+M 18x9.5 +40 5x114.3 Silver Wheel

Vehicle Fitment

• Universal 5x114.3 wheel application
• Requires vehicle compatibility with 18x9.5 wheel size, +40 offset, and 72.6mm hub bore
• May require application-specific hub rings, lug nuts, fender clearance, brake clearance, and tire size verification before installation
• Do not assign vehicle-specific fitment without confirming chassis-specific wheel clearance and load requirements

Features

• Enkei NT03+M racing series wheel
• 18x9.5 wheel size for performance-oriented street and track setups
• 5x114.3 bolt pattern supports a wide range of compatible applications
• +40mm offset for aggressive but application-dependent fitment
• Silver finish
• Perimeter brace ring design helps improve wheel strength
• MAT/rotary forged construction for reduced weight and improved rigidity
• 72.6mm center bore
• Designed for performance handling and motorsport-inspired use
• Single wheel configuration

Specifications

• Part Number: 3658956540SP
• Brand: Enkei
• Model: NT03+M
• Wheel Diameter: 18 in
• Wheel Width: 9.5 in
• Bolt Pattern: 5x114.3
• Offset: +40mm
• Center Bore: 72.6mm
• Finish: Silver
• Construction: MAT / rotary formed
• Weight: 19.4 lb
• Quantity: 1x wheel

Included Components

• 1x Wheel

Product Description

The Enkei 3658956540SP is an NT03+M performance wheel finished in silver and sized at 18x9.5 with a 5x114.3 bolt pattern, +40mm offset, and 72.6mm center bore. This wheel is built for drivers looking for a lightweight, motorsport-inspired design for street performance, track day, and aggressive fitment applications.

Enkei's NT03+M design uses the brand's MAT/rotary formed construction and perimeter brace ring to improve strength and rigidity while keeping weight under control. Official Enkei catalog data lists this exact part number at 19.4 lb. Because this is a universal-fit wheel rather than a vehicle-specific part, proper fitment depends on the vehicle's bolt pattern, brake clearance, suspension clearance, fender clearance, and center bore requirements.

No lift or drop height applies because this is a wheel, not a suspension height-changing component. Vehicle-specific fitment should only be assigned after confirming wheel width, offset, brake clearance, and hub compatibility for the exact application.