Enkei 409-670-12SP J10 Performance 16x7 Silver Machined Lip 5x100/5x114.3 BRZ

Vehicle Fitment

• 2013-2020 Subaru BRZ (Base, Limited, Premium, tS, Series.Gray, Series.Yellow, Series.White, RWD, 2.0L H4)
• 2022-2025 Subaru BRZ (Base, Limited, Premium, tS, RWD, 2.4L H4)
• 2013-2016 Scion FR-S (Base, RWD, 2.0L H4)
• 2017-2020 Toyota 86 (Base, GT, TRD SE, RWD, 2.0L H4)
• 2022-2025 Toyota GR86 (Base, Premium, RWD, 2.4L H4)

Fitment Notes

• Dual-drilled 5x100 / 5x114.3 bolt pattern - all confirmed fitments above use the 5x100 bolt pattern. The 5x114.3 drilling is present but not required for these vehicles.
• Hub bore is 72.62mm; hub-centric rings may be required depending on the specific vehicle's hub bore diameter - verify before installation.
• Offset is +38mm (backspacing: 5.50 in) - verify clearance with your specific brake and suspension setup before installing.
• This is the Silver with Machined Lip version of the J10 16x7 / 5x100 / 5x114.3 lineup. For the Matte Black with Machined Lip version in this same size and bolt pattern, see part number 409-670-12BK.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A center cap is included with purchase.

Features

• Classic 10-spoke design with a gloss silver painted face and machined lip, delivering a bright two-tone contrast finish that pairs well with the clean body lines and sport proportions of the BRZ / FR-S / 86 / GR86 platform family.
• Dual-drilled 5x100 / 5x114.3 bolt pattern is factory-correct for the 5x100 BRZ / FR-S / 86 / GR86 platform, with the secondary 5x114.3 drilling providing additional compatibility flexibility for other vehicles in the same bolt-circle neighborhood.
• The 16x7 size at +38mm offset is a direct upgrade over factory wheel dimensions on the BRZ / FR-S / 86 platform, delivering a wider contact patch and improved visual stance while maintaining full OEM brake and suspension clearance.
• Exposed lug design integrates the lug seat directly into the wheel face for a purposeful, motorsport-influenced aesthetic consistent across the J10 Performance Series lineup in all finishes and sizes.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• One-piece cast alloy construction provides a consistent, balanced wheel structure with no multi-piece joint variance and predictable performance characteristics across all four wheels in a set.
• Available in the same 5x100 / 5x114.3 / +38mm configuration across the full J10 diameter range (16, 17, and 18 inches), allowing builds to step up in wheel size while maintaining finish and fitment consistency.
• Load rating of 1,520 lbs per wheel provides ample capacity for the lightweight sport coupe platform this configuration is designed to serve.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 409-670-12SP
• Wheel Model: J10
• Series: Performance Series
• Wheel Diameter: 16 inches
• Wheel Width: 7 inches
• Bolt Pattern: 5x100 / 5x114.3 (dual-drilled)
• Offset: +38mm
• Backspacing: 5.50 inches
• Hub Bore: 72.62mm
• Load Rating: 1,520 lbs per wheel
• Finish: Silver with Machined Lip
• Wheel Structure: One Piece
• Construction: Cast Alloy
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Lug Style: Exposed

Included Components

• 1x Enkei J10 16x7 Silver with Machined Lip Wheel (409-670-12SP)
• 1x Center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei J10 (409-670-12SP) is a 16x7 Performance Series wheel in a gloss silver finish with a machined lip accent, dual-drilled for 5x100 and 5x114.3 and confirmed to fit the full production run of the Subaru BRZ, Scion FR-S, Toyota 86, and Toyota GR86 platforms. The silver and machined combination is the brighter finish option in the J10 16x7 / 5x100 family, complementing the clean, purpose-built aesthetics of these lightweight RWD sport coupes with a timeless two-tone look that works equally well as a daily driver upgrade or a foundation for a more polished show-spec build. The 16x7 size at +38mm offset upgrades over OEM dimensions while maintaining full clearance with the factory brake and suspension setup across all supported model years.

All confirmed fitments use the 5x100 bolt pattern native to the BRZ / FR-S / 86 / GR86 chassis - the secondary 5x114.3 drilling is included in the dual-drill configuration for additional flexibility but is not required for these applications. Construction follows Enkei's Spec-E standard, demanding a higher impact drop point and 20% more fatigue test cycles than mandatory JWL minimums, ensuring long-term durability across both street and light track use. The one-piece cast alloy structure delivers a 1,520 lb load rating consistent with the lightweight sport coupe segment, and the factory-machined lip provides a bright, precise finish that adds visual depth without requiring any additional finishing work.

This wheel is sold individually and a set of four is required for complete fitment. Hub-centric rings and lug nuts are not included and must be sourced separately - verify hub bore compatibility at 72.62mm for your specific vehicle before purchase. A center cap is included with each wheel. For the Matte Black with Machined Lip version in this same size and bolt pattern, see 409-670-12BK. The same 5x100 / 5x114.3 / +38mm configuration is also available in 17-inch (409-770-12SP) and 18x7.5-inch (409-875-12SP) sizes for builders who prefer a larger diameter while keeping the same fitment and finish.