Enkei 409-670-10BK J10 16x7 Matte Black Machined Lip Wheel 4x100/4x114.3 +42mm

Vehicle Fitment

• Universal fitment - this wheel does not carry vehicle-specific application data. It is dual-drilled for 4x100 and 4x114.3 bolt patterns. Buyers must independently verify fitment against their vehicle's bolt pattern, offset requirements, hub bore, and brake clearance before purchase.

Fitment Notes

• Dual-drilled bolt pattern accommodates both 4x100 and 4x114.3 (4x4.5) applications - confirm which pattern your vehicle uses before installing.
• Hub bore is 72.62mm; hub-centric rings may be required for vehicles with a smaller hub bore - verify your vehicle's hub bore diameter before installation.
• Offset is +42mm (backspacing: 5.65 in, frontspacing: 2.86 in) - verify this offset is compatible with your vehicle's suspension geometry and brake caliper clearance.
• This is the Matte Black with Machined Lip variant of the J10 16x7 / 4x100 / 4x114.3 lineup. For the Silver with Machined Lip version in this same size and bolt pattern, see part number 409-670-10SP. For the 4x100 / 4x108 version, see 409-670-11BK.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A center cap is included with purchase.

Features

• Clean 10-spoke design with a matte black painted face and machined lip, delivering a sharp two-tone contrast finish across a wider, more assertive 16-inch footprint compared to the 15-inch J10 variants.
• Dual-drilled 4x100 / 4x114.3 bolt pattern covers two of the most widely used 4-lug bolt circles across Japanese and Korean compact and sport compact platforms, maximizing compatibility under a single SKU without the need for adapters.
• Stepping up from the 15x6.5 J10 lineup, the 16x7 size at +42mm offset provides a wider tire contact patch and a slightly more aggressive stance while maintaining a conservative backspacing suitable for a broad range of OEM suspension setups.
• Exposed lug design integrates the lug seat directly into the wheel face for a purposeful, motorsport-influenced appearance consistent across all J10 sizes and finishes.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• One-piece cast alloy construction provides a consistent, balanced wheel structure with predictable performance characteristics and no multi-piece joint variance.
• Available across four diameters (15, 16, 17, and 18 inches) in both Silver with Machined Lip and Matte Black with Machined Lip finishes, enabling a cohesive styling choice as diameter requirements change across builds.
• Load rating of 1,522 lbs per wheel provides ample capacity for the compact and sport compact vehicle segment this configuration is designed to serve.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 409-670-10BK
• Wheel Model: J10
• Series: Performance Series
• Wheel Diameter: 16 inches
• Wheel Width: 7 inches
• Bolt Pattern: 4x100 / 4x114.3 (dual-drilled)
• Offset: +42mm
• Backspacing: 5.65 inches
• Frontspacing: 2.86 inches
• Hub Bore: 72.62mm
• Load Rating: 1,522 lbs per wheel
• Weight: 16.7 lbs per wheel
• Finish: Matte Black with Machined Lip
• Wheel Structure: One Piece
• Construction: Cast Alloy
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Lug Style: Exposed

Included Components

• 1x Enkei J10 16x7 Matte Black with Machined Lip Wheel (409-670-10BK)
• 1x Center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei J10 (409-670-10BK) is a 16x7 Performance Series wheel finished in Matte Black with a machined lip accent, dual-drilled for the 4x100 and 4x114.3 bolt patterns. Stepping up from the 15x6.5 J10 variants, the 16-inch diameter and 7-inch width open up a wider tire selection and deliver a more visually assertive stance while keeping the +42mm offset within conservative territory for OEM suspension compatibility. The dual-drilled 4x100 / 4x114.3 configuration covers the two most prevalent 4-lug small bolt circle patterns in the Japanese and Korean compact segment - Honda, Toyota, Mazda, Hyundai, Kia, Nissan, Mitsubishi, and others - without requiring adapters, making this one of the most broadly applicable 16-inch 4-lug wheels in Enkei's lineup.

Like every wheel in the J10 Performance Series, the 409-670-10BK is built to Enkei's Spec-E standard - an in-house testing benchmark that requires a higher impact drop point and 20% more fatigue cycles than mandatory JWL minimums. At 16.7 lbs per wheel, the one-piece cast alloy construction delivers a slight weight advantage over the 15-inch J10 variants while maintaining the same 1,522 lb load rating and structural consistency. The matte black center finish resists visible minor scuffs and surface marks better than gloss finishes, while the factory-machined lip provides a clean bright contrast that elevates the overall appearance without requiring additional finishing work.

Because the 409-670-10BK is a universal fitment wheel, buyers must independently verify compatibility with their specific vehicle before purchase - confirming bolt pattern (4x100 or 4x114.3), hub bore clearance at 72.62mm, offset suitability at +42mm, and adequate brake caliper clearance. Hub-centric rings are not included and may be required depending on the vehicle's hub bore. A center cap is included with each wheel. For the Silver with Machined Lip version in the same size and bolt pattern, see 409-670-10SP. For the 4x100 / 4x108 version of this wheel, see 409-670-11BK.