Enkei 409-565-01BK J10 15x6.5 Matte Black Machined Lip Wheel 4x100/4x114.3 +38

Vehicle Fitment

• Universal fitment - this wheel does not carry vehicle-specific application data. It is dual-drilled for 4x100 and 4x114.3 bolt patterns. Buyers must independently verify fitment against their vehicle's bolt pattern, offset requirements, hub bore, and brake clearance before purchase.

Fitment Notes

• Dual-drilled bolt pattern accommodates both 4x100 and 4x114.3 (4x4.5) applications - confirm which pattern your vehicle uses before installing.
• Hub bore is 72.62mm; hub-centric rings may be required for vehicles with a smaller hub bore - confirm your vehicle's hub bore diameter before installation.
• Offset is +38mm (frontspacing: 2.26 in, backspacing: 5.25 in) - verify this offset is compatible with your vehicle's suspension geometry and brake caliper clearance.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A center cap is included with purchase.

Features

• Clean 10-spoke design with a matte black painted face and machined lip, delivering a two-tone contrast finish that suits both sport compact and daily driver builds.
• Dual-drilled 4x100 / 4x114.3 bolt pattern maximizes compatibility across a wide range of compact and subcompact vehicles, providing a single wheel SKU that works across multiple platforms.
• Exposed lug design is part of the J10's sport-forward aesthetic, integrating the lug seat into the wheel face for a purposeful, motorsport-influenced appearance.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• One-piece alloy construction provides a consistent, balanced wheel structure without the weight penalty or potential joint variance of multi-piece assemblies.
• Available across four diameters (15, 16, 17, and 18 inches) in both Silver with Machined Lip and Matte Black with Machined Lip finishes, allowing for consistent styling across a variety of build requirements.
• Load rating of 1,522 lbs per wheel provides ample capacity for the compact and sport compact vehicles this size is designed for.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 409-565-01BK
• Wheel Model: J10
• Series: Performance Series
• Wheel Diameter: 15 inches
• Wheel Width: 6.5 inches
• Bolt Pattern: 4x100 / 4x114.3 (dual-drilled)
• Offset: +38mm
• Backspacing: 5.25 inches
• Frontspacing: 2.26 inches
• Hub Bore: 72.62mm
• Load Rating: 1,522 lbs per wheel
• Weight: 17 lbs per wheel
• Finish: Matte Black with Machined Lip
• Wheel Structure: One Piece
• Construction: Cast Alloy
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Lug Style: Exposed

Included Components

• 1x Enkei J10 15x6.5 Matte Black with Machined Lip Wheel (409-565-01BK)
• 1x Center cap
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei J10 (409-565-01BK) is a 15x6.5 Performance Series wheel finished in Matte Black with a machined lip accent, offering an accessible entry point into Enkei's quality standards without compromising the brand's hallmark construction integrity. The dual-drilled 4x100 / 4x114.3 bolt pattern makes this wheel a practical choice for builders working across multiple platforms, eliminating the need for separate SKUs when the same offset and diameter serve different vehicles. The 10-spoke layout with exposed lug design is a clean, sport-influenced aesthetic that works equally well on daily drivers, autocross builds, and weekend show cars running a 15-inch fitment.

Like all Enkei wheels, the J10 is tested to the Spec-E standard - Enkei's in-house benchmark that requires a higher drop point in the impact test and 20% more fatigue cycles than JWL mandates. This ensures the wheel exceeds minimum compliance by a meaningful margin and is built to handle real-world road conditions over the long term. The one-piece alloy construction, combined with a 1,522 lb load rating per wheel, provides a well-suited structural foundation for the compact vehicle segment this size is designed to serve.

Because the J10 (409-565-01BK) is a universal fitment wheel, buyers must verify compatibility with their specific vehicle before purchase - including confirming bolt pattern (4x100 or 4x114.3), hub bore (72.62mm), offset suitability at +38mm, and brake caliper clearance. Hub-centric rings may be required depending on the vehicle's hub bore diameter, and are not included. A center cap is included with each wheel. The J10 is also available in Silver with Machined Lip and in larger diameters (16, 17, and 18 inches) for builds requiring a larger footprint.