EBC UD1260 Ultimax OEM Front Brake Pads BMW 328/335 xDrive E90 E92 X1 E84 3.0

Vehicle Fitment

• 2007-2012 BMW 328 (E90 Sedan / E91 Touring / E92 Coupe / E93 Convertible, 3.0L N52 I6, RWD)
• 2007-2008 BMW 328Xi (E90 / E91 / E92, 3.0L N52N I6, xDrive AWD)
• 2009-2012 BMW 328 xDrive (E90 / E91 / E92, 3.0L N52N I6, xDrive AWD)
• 2010-2012 BMW 335 xDrive (E90 / E92, 3.0L N55 Twin Turbo, xDrive AWD)
• 2013-2015 BMW X1 E84 (xDrive28i 2.0T N20 / xDrive35i 3.0T N55, AWD)

Fitment Notes

• Front axle fitment only - sold as one full axle set (4 pads)
• FMSI Pad Number: D1260 - vented front rotor, 312mm diameter, 5-bolt, 120mm PCD
• Fits both RWD and xDrive (AWD) variants of the E9x 328 and 335 where noted above
• BMW X1 fitment covers the first-generation E84 platform only (2013-2015 US model years); does not fit the F48 (2016+) or U11 (2023+) X1
• If upgrading front pads, the same grade upgrade must also be applied to the rear axle
• Hardware and wear sensors included where fitted as standard by the factory

Features

• ECE R90 certified - meets or exceeds the stopping performance of the original OEM brake pads
• Aramid fiber-based, low steel fiber compound - significantly gentler on cast iron rotors than OEM semi-metallic pads, extending disc life
• EBC Brake-In surface coating pre-applied for faster pad bed-in and immediate safe braking from first use
• Center slot and edge chamfers reduce brake noise and prevent pad edge lift under load
• Significantly less brake dust than OEM pads - a notable benefit on BMW alloys prone to dust staining
• Noise-reduction shims on pad reverse for vibration-free, silent braking
• Powder-coated pad and backplate for lifetime corrosion resistance
• British-made in EBC's UK manufacturing facility

Specifications

• Position: Front
• FMSI Number: D1260
• Compatible Rotor: Vented, 312mm Diameter, 23.8mm New / 22.4mm Minimum Thickness, 5-Bolt, 120mm PCD, 79mm Center Bore
• Compound: Ultimax OEM Plus (non-sport, daily driving)
• Certification: ECE R90 Approved
• Quantity: 4 pads (1 full front axle set)
• Hardware: Included where fitted as OEM standard
• Country of Manufacture: United Kingdom

Included Components

• 4x Ultimax OEM Plus Front Brake Pads (full axle set)
• Hardware and wear sensors included where originally fitted as standard by the factory

Product Description

The EBC UD1260 is a front Ultimax OEM Plus brake pad set covering the BMW E9x 3 Series and first-generation E84 X1 platforms. Fitment spans the 2007-2012 BMW 328 across all E9x body styles (E90, E91, E92, E93) in both RWD and xDrive configurations, the 2010-2012 BMW 335 xDrive in E90 and E92 body styles, and the 2013-2015 BMW X1 E84 in both xDrive28i and xDrive35i variants. These pads install directly in place of the factory front pads using the 312mm vented front rotor specification common to these platforms.

Built in EBC's Bristol, UK facility and certified to ECE R90 safety standards, the UD1260 uses a low steel fiber, aramid-based compound that produces significantly less dust and rotor wear than the semi-metallic OEM pads fitted to these BMWs - a meaningful benefit on vehicles where alloy wheel dust staining is a known concern. Each pad arrives pre-coated with EBC's Brake-In surface treatment, which conditions the rotor surface during the first several braking events for confident, consistent stopping from the moment of installation. Center slots, edge chamfers, and reverse-side noise shims ensure quiet, vibration-free braking throughout the pad's service life.

The UD1260 is the right choice for E9x and E84 X1 owners seeking a premium OEM-equivalent front pad at a significant cost saving over BMW dealer pricing. For performance street or spirited driving use on these platforms, consider EBC's Greenstuff, Redstuff, or Yellowstuff grades instead.