EBC GD7642 3GD Dimpled Slotted Front Rotors for 2008-2015 Mitsubishi Lancer Evo

Vehicle Fitment

• 2008-2015 Mitsubishi Lancer Evolution GSR (2.0L 4B11T Turbo, AWD)
• 2008-2015 Mitsubishi Lancer Evolution MR (2.0L 4B11T Turbo, AWD)
• 2009 Mitsubishi Lancer Evolution RS (2.0L 4B11T Turbo, AWD)
• 2010 Mitsubishi Lancer Evolution SE (2.0L 4B11T Turbo, AWD)
• 2010-2011 Mitsubishi Lancer Evolution MR Touring (2.0L 4B11T Turbo, AWD)
• 2015 Mitsubishi Lancer Evolution Final Edition (2.0L 4B11T Turbo, AWD)

Fitment Notes

• Fits CZ4A platform (Evo X / Generation 10) with 1-piece front rotor setup only
• Does not fit Evo VII, VIII, or IX - those use a different rotor diameter and bolt pattern
• Thermic Black coating does not require removal before install - pads clear it naturally within the first 10-20 stops
• Do not fit upgrade pads to the rear unless the same upgrade is also fitted to the front

Features

• Wide-aperture slots draw cool air under the pad contact zone, reducing heat and preventing brake fade during aggressive driving
• Blind-drilled dimples provide superior pad degassing without the crack risk associated with through-drilled holes
• Thermic Black anti-corrosion finish protects all non-contact areas from road salt, brine, and moisture
• Unidirectional rotor design optimized for left and right side placement for maximum braking effectiveness
• Wider vented center aperture promotes airflow between rotor faces for consistent thermal management
• Precision CNC machined to within 0.05mm tolerances; 100% runout and dimensionally inspected before release
• Cast from G3000 high-carbon grey iron - the same spec used in OEM production
• Passed European R90 brake safety standards; tested to run significantly cooler than non-slotted rotors

Specifications

• Position: Front (Left and Right)
• Rotor Diameter: 13.8 in (350mm)
• Rotor Thickness: 32mm
• Hat Height: 43.7mm
• Center Bore: 69mm
• Construction: 1-Piece, Vented
• Style: Dimpled and Slotted (3GD Series)
• Finish: Thermic Black Anti-Corrosion Coating
• Material: G3000 High-Carbon Grey Cast Iron
• Break-In Period: 500 miles recommended with moderate braking

Included Components

• 2x EBC GD7642 Front Brake Rotors (Left and Right)

Product Description

The EBC GD7642 3GD Series Front Brake Rotors are engineered specifically for the Mitsubishi Lancer Evolution X, delivering a meaningful performance upgrade over the factory rotors without requiring any bracket or caliper modifications. At 350mm in diameter, these rotors match OEM dimensions exactly while adding EBC's proven dimpled-and-slotted surface treatment - a combination that actively pulls cooler air through the pad contact area and expels heat, gases, and brake dust even under hard repeated braking. This makes them an ideal fit for Evo X owners who push their cars on canyon roads, mountain passes, or the occasional track day.

Each rotor is individually balanced and runout-inspected before leaving the factory, ensuring smooth, vibration-free braking right out of the box. The Thermic Black coating protects the non-swept areas from corrosion and clears naturally from the contact zone during the initial break-in period - no prep work needed. EBC recommends pairing these rotors with Yellowstuff or Redstuff brake pads for best results, and a 500-mile bedding period with moderate braking to fully seat the pad-to-rotor contact surface.