Brembo 09.N212.11 UV Coated Front Rotor for 2005-2010 Jeep Grand Cherokee 360mm

Vehicle Fitment

• 2005-2010 Jeep Grand Cherokee (WK/WH) - Laredo, Limited, Overland, Rocky Mountain, North Edition, 65th Anniversary Edition (3.7L V6, 4.7L V8, 5.7L V8 HEMI, 4WD)
• 2006-2010 Jeep Grand Cherokee SRT8 (WK) - 6.1L V8 SRT, 4WD
• 2006-2010 Jeep Commander (XK/XH) - Base, 65th Anniversary Edition, Limited, Overland, Sport (3.7L V6, 4.7L V8, 5.7L V8 HEMI, 4WD)

Fitment Notes

• This is the 360mm front rotor. Do NOT confuse with Brembo 09.A031.11, which is a smaller 328mm front rotor also listed for 2005-2010 Grand Cherokee and Commander. Verify your existing rotor diameter before ordering.
• This rotor is NOT sided - a single part number fits both the left (driver) and right (passenger) front positions on the same vehicle.
• Sold individually - two rotors are required for a complete front axle replacement.
• Replaces Jeep OE part numbers 5290733AA and 5290733AB.
• Compatible with all drivetrain configurations: 4WD on both Grand Cherokee WK and Commander XK platforms.
• Fits the Grand Cherokee SRT8 6.1L V8 factory front brake specification - this rotor is OE-spec for SRT8 models.

Features

• Brembo Prime Line OE-equivalent design - engineered as a direct replacement for Jeep's factory 360mm front rotor on WK Grand Cherokee and XK Commander platforms, requiring no modifications or bracket changes for installation.
• UV coating applied to the braking surface, outer diameter, and hub using a solvent-free, water-based process - delivering superior corrosion resistance that exceeds OE standards and preserving a clean, polished appearance out of the box.
• Pillar Vented Technology (PVT) - Brembo's patented internal pillar venting maximizes airflow through the rotor, delivering up to 40% greater thermal crack resistance versus conventional vane-vented designs.
• High-carbon cast iron construction minimizes brake noise and vibration while improving thermal stability and heat dissipation - essential for large-displacement V8 and V6 applications where front brakes manage significant braking loads.
• Precision electronic balancing during production minimizes lateral runout, eliminating brake pedal pulsation and vibration for smooth, confident stopping power under all conditions.
• ECE R-90 certified - independently validated to meet European automotive safety and performance standards, confirming OE-equivalent stopping performance.
• Non-sided design - a single part fits both left and right front positions, simplifying ordering and stocking.
• Intelligent part marking - part number and minimum discard thickness are stamped directly on the rotor for easy identification at service intervals.
• Includes fixing screw hardware kit - all required mounting fasteners for installation are included in the box.

Specifications

• Position: Front (Left or Right - not sided)
• Rotor Type: Vented (Internally Ventilated)
• Outside Diameter: 360mm (14.17")
• Nominal Thickness: 32mm (1.26")
• Minimum Discard Thickness: 30.4mm (1.20")
• Hat Height: 53mm (2.09")
• Centering Bore Diameter: 72mm
• Number of Bolt Holes: 5
• Venting: Pillar Vented Technology (PVT)
• Coating: UV Coated (braking surface, outer diameter, and hub)
• Material: High-Carbon Cast Iron
• Jeep OE Cross-References: 5290733AA / 5290733AB
• Units Per Box: 1

Included Components

• 1x Brembo 09.N212.11 UV Coated Front Disc Brake Rotor
• 1x Fixing screw/hardware kit for installation

Product Description

The Brembo 09.N212.11 is a Prime Line UV Coated vented front disc brake rotor engineered as a direct OE-equivalent replacement for the Jeep Grand Cherokee (WK/WH) and Jeep Commander (XK). Replacing Jeep OE part numbers 5290733AA and 5290733AB, this 360mm rotor covers the complete 2005-2010 Grand Cherokee lineup - from the entry-level Laredo through the 5.7L HEMI-powered Overland and the 6.1L V8 SRT8 - as well as the full 2006-2010 Commander range. Both platforms share the same front brake hub geometry, making this a single-rotor solution across two models spanning five model years and multiple engine variants.

Built from high-carbon cast iron with Brembo's patented Pillar Vented Technology (PVT), the 09.N212.11 manages the considerable heat loads generated by large-displacement V8 engines and the aggressive braking demands of SRT8-level performance. The PVT system maximizes internal airflow through the rotor, delivering up to 40% greater thermal crack resistance than conventional vane-vented designs. A UV coating applied to the full rotor surface - including the braking plates - provides superior corrosion protection using a solvent-free, environmentally responsible process that keeps the rotor looking clean well after installation. Precision electronic balancing during production ensures minimal lateral runout, eliminating the pedal pulsation that typically accompanies worn or lower-quality replacement rotors.

Before ordering, confirm your existing front rotor diameter. A separate, smaller 328mm front rotor (Brembo 09.A031.11) is also available for these platforms and the two are not interchangeable - measure your current rotor or verify via your Jeep's VIN build sheet before purchasing. This rotor is not sided and fits both driver and passenger front positions. Two rotors are required for a complete front axle service. For best results, Brembo recommends replacing rotors and brake pads at the same time and pairing with Brembo NAO Ceramic or Low-Met brake pad formulations.