aFe 54-13083D MagnumFORCE Stage-2 Pro DRY S Cold Air Intake for 2025-2026 Ram

Vehicle Fitment

• 2025-2026 Ram 1500 RHO, L6-3.0L (tt) High-Output Hurricane, 4WD

Fitment Notes

• Fits the Ram 1500 RHO exclusively - engineered specifically for the High-Output (H/O) twin-turbocharged 3.0L Hurricane inline-six engine configuration.
• Does not fit the standard Ram 1500 DT platform or any Ram 1500 equipped with the 3.0L Standard Output Hurricane, 5.7L HEMI, or any other engine variant.
• Does not fit the Ram 2500 or Ram 3500.
• This product is not CARB exempt and is not legal for sale or use in California or on any vehicle registered with the California Department of Motor Vehicles.
• The Pro DRY S filter variant - for the oiled Pro 5R version, see aFe part number 54-13083R.

Features

• Dyno-proven to outflow the factory intake system by 43%, delivering verified gains of +19 horsepower and +29 lb-ft of torque on the 3.0L High-Output Hurricane engine.
• Open-element design removes the restrictive factory airbox entirely, allowing the twin-turbocharged Hurricane engine to breathe freely and produce a more aggressive, audible induction tone under acceleration.
• Pro DRY S air filter uses three layers of progressively denser oil-free synthetic media for strong filtration capacity and excellent dust-holding performance - no oiling required for service or maintenance.
• Rounded deep-pleat filter design features a 100% polyurethane base and top with an innovative retention groove for maximum airflow surface area, superior dust-holding capacity, and easy, tool-free filter removal.
• Dyno-tuned roto-molded XLPE (cross-linked polyethylene) intake tube is heat-soak resistant, precisely shaped for the RHO engine bay, and engineered to maximize air velocity and volume to the turbocharger inlets.
• Premium stainless-steel clamps and silicone couplings provide a secure, leak-free seal with ample flexibility to absorb engine movement and vibration.
• Washable and reusable Pro DRY S filter media - rechargeable with aFe POWER Cleaner for continued high-flow performance without the need for filter oil.
• Direct bolt-on installation using factory mounting locations - no cutting, drilling, or permanent modifications to OEM components required.
• All necessary hardware, clamps, and couplings included for a complete installation using basic hand tools.

Specifications

• Part Number: 54-13083D
• System Type: MagnumFORCE Stage-2 Cold Air Intake - Replaces OEM Airbox and Intake Tract, Open-Element Design
• Filter Media: Pro DRY S - Oil-Free, 3-Layer Progressive Synthetic, Washable & Reusable
• Filter Frame: 100% Polyurethane (base and top)
• Filter Design: Rounded Deep-Pleat with Retention Groove
• Intake Tube Material: XLPE (Cross-Linked Polyethylene) - Roto-Molded, Dyno-Tuned, Heat-Soak Resistant
• Clamp Material: Premium Stainless Steel
• Coupling Material: Silicone
• Airflow Improvement Over Stock: 43%
• Max Dyno-Tested Power Gain: +19 HP / +29 lb-ft TQ
• Engine Compatibility: L6-3.0L (tt) High-Output Hurricane - Ram 1500 RHO only
• Drivetrain: 4WD
• CARB Status: Not CARB Exempt - not for sale or use in California

Included Components

• 1x Pro DRY S Air Filter (oil-free, 3-layer synthetic, rounded deep-pleat design, polyurethane frame)
• 1x Dyno-Tuned Roto-Molded XLPE Intake Tube
• 1x Set of Premium Stainless-Steel Clamps
• 1x Set of Silicone Couplings
• 1x Complete mounting hardware kit

Product Description

The aFe POWER 54-13083D MagnumFORCE Stage-2 Cold Air Intake System is purpose-built for the 2025-2026 Ram 1500 RHO and its High-Output twin-turbocharged 3.0L Hurricane inline-six engine. Engineered from the ground up for the RHO platform, this open-element Stage-2 system eliminates the factory airbox entirely, replacing it with a dyno-tuned roto-molded XLPE intake tube and a high-flow Pro DRY S conical filter to significantly increase the volume and velocity of air feeding the engine's twin turbochargers. The result is a measured 43% improvement in airflow over stock and dyno-proven gains of +19 horsepower and +29 lb-ft of torque - unlocking performance that the High-Output Hurricane was built to deliver but the factory intake restricts.

The Pro DRY S filter at the center of this system uses three layers of progressively denser oil-free synthetic media in a rounded deep-pleat configuration with a full polyurethane frame and an innovative retention groove for secure, tool-free removal. This dry-media design requires no oiling at any point - cleaning is as simple as washing and reinstalling - making it the ideal choice for RHO owners who want maximum convenience alongside performance. The roto-molded XLPE intake tube is heat-soak resistant and contoured to the exact geometry of the RHO engine bay for a direct bolt-on fit using factory mounting points, with premium stainless-steel clamps and flexible silicone couplings ensuring a clean, secure installation with no permanent modifications required.

The open-element design also enhances the audible character of the 3.0L Hurricane's twin-turbo induction, producing a deeper, more aggressive intake sound that reflects the RHO's high-performance character. This intake is not CARB exempt and is not legal for sale or use in California. For RHO owners who prefer an oiled filter, the Pro 5R version of this intake is available as aFe part number 54-13083R, which delivers the same 43% airflow improvement with a gain of +19 HP and +31 lb-ft of torque.