aFe 50-70119D Momentum GT Pro DRY S Intake for 24-26 Tacoma/25-26 4Runner L4-2.4

Vehicle Fitment

• 2024-2026 Toyota Tacoma, L4-2.4L (t) - Gas and Hybrid models, all trims EXCEPT TRD Pro and Trailhunter (SR, SR5, TRD Sport, TRD Off-Road, Limited)
• 2025-2026 Toyota 4Runner, L4-2.4L (t) - all trims EXCEPT TRD Pro and Trailhunter (SR5, TRD Sport, TRD Off-Road, Limited, Platinum)

Fitment Notes

• Does NOT fit the Toyota Tacoma TRD Pro or Trailhunter submodels - these trims use a different intake routing that is incompatible with this system.
• Does NOT fit the Toyota 4Runner TRD Pro or Trailhunter submodels for the same reason.
• Fits both Gas and Hybrid Tacoma models (2024-2026) - both powertrains share the same 2.4L turbocharged engine and intake architecture.
• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Optional Dynamic Air Scoop (D.A.S.) available separately - PN 50-70119S (Tacoma only; does NOT fit 4Runner). Replaces the factory air inlet duct to supply more cold air from the front of the vehicle into the intake housing.
• Direct bolt-on installation using all factory mounting locations - no cutting, drilling, or modifications required.

Features

• Momentum GT cold air intake system purpose-built for the 2024-2026 Toyota Tacoma and 2025-2026 Toyota 4Runner equipped with the turbocharged L4-2.4L engine.
• Dyno-proven gains of +11 HP and +12 lbs. x ft. TQ - outflows the factory intake by 20%, measuring 335 CFM at 7" H2O.
• Pro DRY S filter media: three layers of progressive synthetic media delivering excellent filtration efficiency and dust holding capacity without the use of oil - washable, reusable, and maintenance-friendly.
• 8" tall, 360-degree radial flow filter with a 4" flange and inverted top design for maximum filter surface area and extended service intervals between cleanings.
• One-piece sealed XLPE (cross-linked polyethylene) housing - heat-soak resistant, maintains factory air inlet pathway to capture cool outside air and isolate it from engine bay heat.
• Large clear sight window allows convenient visual filter inspection without removing or disassembling the system.
• Dyno-tuned XLPE intake tube - computer-designed for maximum power gains while maintaining a precise factory fit on the Tacoma and 4Runner platform.
• Patented filter-to-housing interface minimizes total part count for a fast, straightforward installation process.
• Premium stainless-steel clamps and silicone coupler provide a secure, durable, and leak-free connection throughout the intake path.
• Optional Dynamic Air Scoop (50-70119S, sold separately - Tacoma only) further maximizes cold air delivery by routing fresh air from the front of the vehicle through an inlet twice the size of the factory scoop.
• Engineered and manufactured at aFe POWER's Corona, California facility.

Specifications

• Part Number: 50-70119D
• Series: Momentum GT
• Filter Media: Pro DRY S (oil-free, 3-layer synthetic, washable and reusable)
• Filter Height: 8 IN
• Filter Flange: 4 IN
• Filter Style: 360-degree radial flow, inverted top
• Housing Material: Cross-Linked Polyethylene (XLPE) - heat-soak resistant, one-piece sealed
• Sight Window: Large clear window for filter inspection without disassembly
• Intake Tube: Dyno-tuned XLPE (heat-soak resistant)
• Dyno-Proven Gains: +11 HP / +12 lbs. x ft. TQ
• Airflow: 335 CFM @ 7" H2O - outflows factory intake by 20%
• Hardware: Stainless-steel clamps, silicone coupler
• Installation: Direct bolt-on; factory mounting locations; no cutting required
• Optional Dynamic Air Scoop: PN 50-70119S (sold separately; Tacoma only)
• MSRP: $695.00
• CARB EO#: Not currently CARB exempt - not for sale in California

Included Components

• 1x Pro DRY S air filter (8 IN tall, 360-degree radial flow, 4 IN flange, inverted top)
• 1x One-piece sealed XLPE intake housing (with clear sight window)
• 1x Dyno-tuned XLPE intake tube
• 1x Hardware kit (stainless-steel clamps, silicone coupler, and mounting hardware)

Product Description

The aFe POWER Momentum GT Cold Air Intake System with Pro DRY S Filter (PN 50-70119D) is engineered for the 2024-2026 Toyota Tacoma and 2025-2026 Toyota 4Runner equipped with the turbocharged L4-2.4L engine. Both platforms share the same 2.4L turbocharged four-cylinder architecture, and this system delivers dyno-proven gains of +11 HP and +12 lbs. x ft. of torque by replacing the restrictive factory airbox with a purpose-built sealed intake assembly that flows 20% more air at 335 CFM measured at 7" H2O. The Pro DRY S filter media provides three layers of progressive synthetic filtration - oil-free, washable, and reusable - making it ideal for Tacoma and 4Runner owners who use their vehicles in dusty or off-road environments where oiled filter maintenance is inconvenient. After cleaning, simply reinstall and drive - no re-oiling required at any service interval.

The one-piece XLPE sealed housing maintains the factory air inlet pathway, keeping the intake isolated from engine bay heat while drawing in cool outside air. A large clear sight window allows the filter to be visually inspected at any time without tools or disassembly - a practical advantage for active off-road use. The 8" tall, 360-degree radial flow filter with inverted top maximizes filter surface area within the housing, extending the time between cleaning intervals compared to smaller-format filters. The system is compatible with the optional Dynamic Air Scoop (PN 50-70119S, sold separately) which, on the Tacoma, replaces the factory air inlet duct with an upgrade that delivers twice the air inlet area and further reduces intake air temperatures. Note: the D.A.S. fits the Tacoma only - it is not compatible with the 4Runner installation.

This system fits all 2024-2026 Tacoma trims equipped with the 2.4L turbocharged engine - including Gas and Hybrid variants - except the TRD Pro and Trailhunter submodels, which use a different intake routing incompatible with this design. The same exclusions apply to the 2025-2026 4Runner. Installation requires no cutting, drilling, or modification - the system bolts directly to all factory mounting points using the included stainless-steel clamps and silicone coupler in approximately one hour. This product is not currently CARB exempt and cannot be sold into California. Built to aFe POWER's exacting standards and manufactured at their Corona, California facility, the Momentum GT Pro DRY S is the proven first-step performance and maintenance-friendly intake upgrade for fifth-generation Tacoma and sixth-generation 4Runner owners.