Zone Offroad ZONC1121 1.25" Leveling Kit for 2005-2022 Chevy Colorado/GMC Canyon

Vehicle Fitment

• 2005-2022 Chevrolet Colorado (All Trims incl. ZR2, Work Truck, LT, Z71, Trail Runner; 2WD/4WD; Gas & Diesel)
• 2005-2012 GMC Canyon (All Trims; 2WD/4WD; Gas & Diesel)
• 2015-2022 GMC Canyon (All Trims incl. AT4, Denali, SLE, SLT; 2WD/4WD; Gas & Diesel)
• 2003-2005 Chevrolet Blazer (All Trims; 2WD/4WD; Gas & Diesel)

Fitment Notes

• GMC Canyon was not produced during the 2013-2014 model years; ZONC1121 fits the first-generation Canyon (2005-2012) and the second-generation Canyon (2015-2022) as separate model ranges.
• Compatible with all Colorado/Canyon trim levels including ZR2 - Zone Offroad has confirmed ZR2 fitment for this kit.
• Compatible with both gas and diesel engines across all listed model years.
• Compatible with both 2WD and 4WD drivetrain configurations.
• This kit represents the maximum allowable top-mount strut spacer height for the Colorado/Canyon platform - no additional front spacer stack is possible while maintaining OE suspension geometry and factory ride quality.
• Factory wheels are compatible when paired with factory/OE tire sizes. An alignment is recommended after installation.
• This is a front-only leveling kit. Rear lift height remains at stock height.

Features

• Top-mounted, fully bolt-on strut spacers install directly above the factory strut assembly - no strut disassembly, no spring compression, and no special tools required beyond basic hand tools.
• Laser-cut steel construction delivers precise, consistent dimensions for a rattle-free, precision fit on every application.
• Black e-coat finish provides long-lasting corrosion protection against moisture, road salt, and off-road exposure.
• Delivers 1.25 inches of front lift to correct the factory front-to-rear rake, creating a level, more aggressive stance without altering rear ride height.
• Retains full factory ride quality and factory suspension geometry - no correction arms or extended shocks required at this lift height.
• Allows fitment of tires up to 265/65 (approximately 32") without trimming, depending on wheel and backspacing selection.
• Confirmed compatible with ZR2 models - addresses the unique front strut tower geometry of the Colorado ZR2 off-road package.
• Made in the USA; backed by Zone Offroad's Shield Limited Lifetime Warranty.

Specifications

• Front Lift Height: 1.25 inches
• Rear Lift Height: 0 inches (stock/unchanged)
• Front Lift Method: Top-mounted strut spacers
• Spacer Material: Laser-cut steel
• Finish: Black e-coat
• Shocks Included: No
• Strut Disassembly Required: No
• Cutting or Welding Required: No
• Accommodates Factory Wheels: Yes (with factory tire size)
• Maximum Tire Size: 265/65 (approx. 32")
• Recommended Wheel & Backspacing: Stock wheel size and backspacing
• Estimated Install Time: 1-2 hours
• Difficulty Level: 2 out of 5
• Position: Front axle only
• Warranty: Zone Offroad Shield Limited Lifetime Warranty

Included Components

• 2x Laser-cut steel top-mount strut spacers (1.25")
• 1x Complete hardware kit (all mounting nuts, bolts, and fasteners for installation)

Product Description

The Zone Offroad ZONC1121 is a 1.25" top-mounted strut spacer leveling kit designed for the 2005-2022 Chevrolet Colorado, 2003-2005 Chevrolet Blazer, and 2005-2012 and 2015-2022 GMC Canyon. These platforms come from the factory with a slight nose-down rake - a stance that helps with towing geometry but creates an unleveled appearance that many owners want to correct. The ZONC1121 closes that gap by adding 1.25 inches of front lift via precision laser-cut steel spacers that bolt directly to the top of the factory strut tower, requiring no disassembly of the factory strut assembly, no spring compressor, and no modification of the factory suspension. This is also the maximum amount of top-mount front spacing these trucks can accept while maintaining OE-compatible geometry - making it both the easiest and the most complete leveling solution available for the platform.

Installation is designed to be accessible to a mechanically inclined DIYer in roughly one to two hours using basic hand tools. The black e-coat finish protects the spacers from corrosion in all weather conditions, and the laser-cut steel construction ensures the spacers seat flush and true every time. The kit is compatible with every drivetrain and powertrain option available across the Colorado and Canyon lineup - including 2WD, 4WD, gas, and diesel - and is confirmed to work on ZR2 models. Factory wheels remain compatible at factory tire sizes, and the kit opens the door to fitting tires up to approximately 265/65 (around 32") depending on wheel selection and backspacing.

This is a front-only kit - rear ride height remains completely stock. The 1.25" front lift effectively eliminates the factory nose-down rake, producing a level or very slightly nose-high stance depending on the truck's load. An alignment is always recommended after any suspension height change, including leveling kits, to bring toe back into spec. Backed by Zone Offroad's Shield Limited Lifetime Warranty and made in the USA, the ZONC1121 is one of the most straightforward, cost-effective stance upgrades available for the Colorado and Canyon platform.