Wilwood 140-10016 DynaPro Radial Front Drag Brake Kit for 94-04 Ford Mustang

Vehicle Fitment

• 1994-2004 Ford Mustang (All Trims, All Engines -- Factory Disc Spindle)

Fitment Notes

• Front axle only -- complete front kit
• Factory disc spindle required -- does not fit vehicles with aftermarket or non-OE spindles
• Minimum wheel diameter: 15 in. -- verify clearance with your specific drag wheel using Wilwood wheel clearance diagram
• Brake line kit required -- Wilwood 220-6458 (18 in., -3 size, sold separately)
• Recommended for vehicles over 2,800 lbs. or running extreme speeds -- 0.81 in. rotor provides increased durability
• Compatible with factory master cylinder -- no master cylinder upgrade required
• Bolts to OE caliper mount -- no spindle or steering linkage modifications required

Features

• Narrow DynaPro Radial Mount (NDPR) forged billet 4-piston calipers -- designed to fit inside 15 in. drag wheels
• Radial caliper mount brackets -- bolt directly to OE caliper mount location
• Type III hard-anodized caliper finish -- corrosion and wear resistant
• Heavy-wall stainless steel pistons -- resist corrosion and slow heat transfer from pads
• BP-10 SmartPad compound -- high-performance street/strip, excellent fade resistance
• 11.75 in. Ultralite HP 32 vented iron rotors -- 32-vane design for improved cooling
• Drag hat with shallow 0.790 in. offset -- maintains factory wheel position
• Black e-coat aluminum drag hat -- lightweight, corrosion resistant
• 5 x 4.50 in. bolt circle -- Ford Mustang lug pattern
• Compatible with factory master cylinder output
• Manufactured in Camarillo, California, USA

Specifications

• Kit type: Dynapro Radial Front Pro-Street Drag Brake Kit
• Position: Front
• Caliper: Narrow DynaPro Radial Mount (NDPR) -- 4 piston
• Caliper finish: Type III anodize
• Piston bore: 1.75 in. x 4
• Piston area: 4.80 in²
• Piston type: Stainless steel
• Pad compound: BP-10 (SmartPad)
• Pad plate: 7812
• Pad area: 6.36 in²
• Rotor diameter: 11.75 in.
• Rotor width: 0.81 in.
• Rotor type: Ultralite HP 32 -- vented iron, plain face
• Rotor vanes: 32
• Hat type: Drag -- shallow offset
• Hat offset: 0.790 in.
• Hat finish: Black e-coat aluminum
• Bolt circle: 5 x 4.50 in.
• Minimum wheel diameter: 15 in.
• Mount type: Radial
• Brake line kit: 220-6458 (sold separately)
• UPC: 889545008371

Included Components

• 2x Narrow DynaPro Radial Mount 4-piston calipers (Type III anodize)
• 2x 11.75 in. Ultralite HP 32 vented iron rotors (plain face)
• 2x Drag hat -- shallow offset, black e-coat aluminum
• BP-10 SmartPad brake pads (pad plate 7812)
• Radial caliper mount brackets
• Grade 8 hardware kit

Product Description

The Wilwood 140-10016 is a DynaPro Radial Front Pro-Street Drag Brake Kit for the 1994-2004 Ford Mustang. The kit was engineered specifically to solve the clearance problem that prevents most stock and performance brake setups from fitting inside the 15-inch drag wheels commonly used on Mustang drag builds. The Narrow DynaPro Radial Mount (NDPR) forged billet 4-piston calipers are narrower than Wilwood's standard DynaPro calipers, and the radial mount bracket bolts directly to the OE caliper mount location without requiring spindle modification, steering linkage changes, or a master cylinder upgrade.

The 11.75-inch Ultralite HP 32 vented iron rotors sit on a drag hat with a shallow 0.790-inch offset to maintain factory wheel positioning. The 0.81-inch rotor width is recommended for vehicles over 2,800 lbs. or for lighter cars running at extreme speeds where additional rotor mass and durability are needed. BP-10 SmartPad compound provides strong initial bite and fade resistance across the street/strip temperature range. Brake line kit 220-6458 is required for installation and sold separately. Verify wheel clearance using Wilwood's wheel clearance diagram before ordering. Manufactured in Camarillo, California.