Wilwood 150-35-7416K BP-35 High-Temp Racing Brake Pads for Superlite 4/6 Caliper

Vehicle Fitment

• Billet Narrow Superlite 4 Radial Mount Calipers (Pad Plate #7416)
• Billet Narrow Superlite 6 Lug Mount Calipers (Pad Plate #7416)
• Billet Narrow Superlite 6 Radial Mount Calipers (Pad Plate #7416)
• Forged Narrow Superlite (FNSL) Calipers - All Variants (Pad Plate #7416)
• Forged Narrow Superlite 4 Radial Mount (FNSL4R) - Standard & Thermlock/ST (Pad Plate #7416)
• Forged Narrow Superlite 4 Dust Seal Radial Mount (FNSL4R-DS) (Pad Plate #7416)
• Forged Narrow Superlite 6 Radial Mount (FNSL6R) - Standard, ST & Quick-Silver (Pad Plate #7416)
• Forged Narrow Superlite 6 Dust Seal Radial Mount (FNSL6R-DS) (Pad Plate #7416)
• SLC56 Calipers (Pad Plate #7416)

Fitment Notes

• Fitment is determined by caliper pad plate type - verify your caliper uses Pad Plate #7416 before ordering
• For racing use ONLY - NOT approved for street use or highway driving
• Compatible with iron and steel rotors only - not for use with aluminum or carbon rotors
• Pads are not pre-bedded - a proper heat-cycling bedding procedure is required before race use
• Kit contains 4 brake pads (sufficient for one caliper position - order 2 kits for a full axle set)

Features

• BP-35 high-friction compound delivers a linear, progressive feel with excellent release characteristics
• Good cold response that increases with rotor temperature - predictable engagement from the first lap
• Smooth, consistent pedal feel with low-medium wear rate for extended race sessions
• Optimized for sustained high-temperature operation - ideal for road course, pavement oval, and off-road racing
• Compatible with ABS-equipped track cars - suitable for club sport and professional competition
• Engineered for use with iron and steel rotors for maximum friction performance and rotor longevity
• Designed for applications regularly exceeding 1000°F rotor temperatures
• Suitable for drag racing on stainless steel rotors and Dirt Late Model applications

Specifications

• Part Number: 150-35-7416K
• Pad Plate: #7416
• Compound: BP-35
• Pad Thickness: 0.65 in.
• Pad Area: 8.2 in²
• Pad Volume: 3.8 in³
• Bedded: No - requires bedding before use
• Rotor Compatibility: Iron and Steel
• Use: Racing Only - Not for street use
• Compatible Caliper Max Rotor Width: Up to 1.25 in.
• Compatible Caliper Max Rotor Diameter: Up to 14.00 in.

Included Components

• 4x BP-35 Compound Brake Pads (Pad Plate #7416) - One Full Caliper Set

Product Description

The Wilwood 150-35-7416K is a set of four BP-35 compound high-temperature racing brake pads for Pad Plate #7416 calipers, covering the full Forged and Billet Narrow Superlite 4 and 6 caliper families. The BP-35 compound is engineered for sustained high-temperature competition, with friction that builds linearly with rotor temperature, smooth initial response, and excellent release characteristics. It performs reliably across road course, pavement oval, off-road, Dirt Late Model, open wheel, and club sport applications - including ABS-equipped track cars.

These pads are for racing use only and must not be used on public roads. They require a proper heat-cycling bedding procedure before race use and are compatible with iron and steel rotors only. Each kit contains 4 pads for one caliper - two kits are needed for a complete front or rear axle set. Verify your caliper uses Pad Plate #7416 before ordering.