Weld S1558C022N23 Ventura 5 Drag 18x5 5x120 for 2010-2024 Camaro SS/1LE/ZL1

Vehicle Fitment

• 2010-2015 Chevrolet Camaro SS / ZL1 (5th Generation, RWD, 6.2L V8)
• 2016-2024 Chevrolet Camaro SS / 1LE / ZL1 (6th Generation, RWD, 6.2L V8)
• 2009-2014 Cadillac CTS-V Sedan (2nd Generation, RWD, 6.2L V8 Supercharged)
• 2011-2015 Cadillac CTS-V Coupe (2nd Generation, RWD, 6.2L V8 Supercharged)
• 2014-2016 Chevrolet SS Sedan / Holden VF Commodore (RWD, 6.2L V8)
• 2008-2009 Pontiac G8 GT / Holden VE Commodore (RWD, 6.0L V8)
• 2014-2019 Chevrolet Corvette C7 Z06 / Grand Sport (5x120 bolt pattern variant, RWD, 6.2L V8)
• 2006-2013 Chevrolet Corvette C6 Z06 / Grand Sport (5x120 bolt pattern variant, RWD, 7.0L / 6.2L V8)

Fitment Notes

• This is a FRONT RUNNER (narrow) drag wheel intended for front axle use only.
• 6th Gen Camaro ZL1 (2016-2024): A 13mm wheel spacer is required for proper clearance.
• 6th Gen Camaro ZL1 1LE and models equipped with the BCD Copper Free Brake Kit require a 19" front wheel - this 18" wheel does NOT fit those configurations.
• Corvette C7 Z06 / Grand Sport fitment is for the 5x120mm bolt pattern only - does NOT fit the standard Corvette 5x120.65 (5x4.75") bolt pattern used on C5, C6 Base, C7 Base, or C7 Z51 models.
• Corvette C7 Z06 / Grand Sport: Has NOT been tested to clear Z07 carbon ceramic brake package.
• Sold individually - one wheel per listing.
• Bolt pattern is 5x120mm - do NOT confuse with Corvette's native 5x120.65mm (5x4.75") bolt pattern.

Features

• Rotary Forged (Flow Formed) barrel construction for superior strength at reduced weight compared to conventional cast wheels.
• Monoblock (one-piece) design eliminates multi-piece assembly failure points for maximum structural integrity under high-horsepower drag racing conditions.
• SFI 15.1 and SFI 15.2 certified - meets sanctioning body requirements for drag strip use.
• Real beadlock ring design with 6061 aluminum scalloped construction and Heli-Coil® thread inserts for superior tire retention under hard launches.
• Inner and outer barrel bead knurling provides additional mechanical tire retention for safety and consistency at the strip.
• Raised center cap design provides added axle nut clearance, critical for proper installation on performance platforms.
• Clears factory big brake kits on compatible platforms without modification.
• Gloss black finish with milled spoke windows for an aggressive, race-inspired aesthetic.
• Engineered with WELD's Finite Element Analysis (FEA) process to optimize strength-to-weight ratio across all load and lateral force scenarios.

Specifications

• Part Number: S1558C022N23
• Diameter: 18 inches
• Width: 5 inches
• Bolt Pattern: 5x120mm
• Offset: -23mm
• Backspacing: 2.10 inches
• Frontspacing: 3.91 inches
• Hub Bore: 78.1mm
• Material: Rotary Forged 6061 Aluminum
• Finish: Gloss Black with Milled Spoke Windows
• Position: Front axle (front runner / skinny wheel)
• SFI Certifications: 15.1 and 15.2
• Seat Type: Cone seat (lug seat)

Included Components

• 1x WELD Ventura 5 Drag Front Runner Wheel (18x5, 5x120, -23mm offset, Gloss Black / Milled)

Product Description

The WELD Ventura 5 Drag Front Runner wheel (S1558C022N23) is purpose-built for high-horsepower GM drag racing applications. Measuring 18 inches in diameter and just 5 inches wide, this narrow front wheel is designed to minimize rotational mass and aerodynamic drag at the front axle, allowing power to transfer directly to the rear tires where it belongs. Built using WELD's proprietary Rotary Forged (flow-formed) barrel technology combined with monoblock construction, the Ventura 5 delivers race-proven strength without the weight penalty of cast alternatives. SFI 15.1 and 15.2 certification ensures compliance with drag strip sanctioning rules, making it ready for competition right out of the box.

Fitment covers a broad range of 5x120mm GM performance platforms including the 5th and 6th Generation Chevrolet Camaro SS, 1LE, and ZL1 (2010-2024), the 2nd Generation Cadillac CTS-V Sedan and Coupe (2009-2015), the Chevrolet SS Sedan / Holden VF Commodore (2014-2016), and the Pontiac G8 GT / Holden VE Commodore (2008-2009). For Corvette owners, this wheel also fits C6 Z06 / Grand Sport (2006-2013) and C7 Z06 / Grand Sport (2014-2019) models on the 5x120mm bolt pattern - note that standard Corvette models use the different 5x120.65mm pattern and are not compatible. Important: 6th Gen ZL1 owners will require a 13mm spacer, and ZL1 1LE / BCD Copper Free Brake Kit-equipped vehicles require a 19" front wheel instead.

The Ventura 5's real beadlock ring with 6061 aluminum construction and Heli-Coil® thread inserts, paired with inner and outer barrel bead knurling, ensures tire retention under the violent shock loads of a hard drag launch. The raised center cap accommodates axle nut protrusion, a critical engineering detail often overlooked on generic drag wheels. Whether you're running a street/strip Camaro SS or a purpose-built ZL1 drag car, the WELD Ventura 5 front runner represents the gold standard in narrow drag wheel engineering for GM performance platforms.