Walbro F20000141 190 LPH GSS In-Tank Fuel Pump 1998-2002 Honda Accord 2.3L 3.0

Vehicle Fitment

• 1998-2002 Honda Accord (2.3L I4, F23A engine)
• 1998-2002 Honda Accord (3.0L V6, J30A1 engine)

Fitment Notes

• This listing is for the fuel pump only (bare pump). An application-specific installation kit including strainer, grommets, wiring, and hardware must be purchased separately to complete the installation.
• This pump is NOT compatible with E85, flex fuel, or ethanol blends. Designed for use with gasoline only.
• This pump uses an IOOP (Inlet-Outlet Opposing) configuration with an 11mm inlet. Verify hanger and strainer compatibility before installing.
• The F20000141 is a 2nd generation GSS-style 39mm in-tank pump. It is designed to fit existing factory hanger assemblies without modification on the 1998-2002 Accord.
• This pump is rated to support up to approximately 350 horsepower on gasoline. For higher power applications or E85, a higher-capacity pump is recommended.
• Note: this pump has been noted as obsolete/superseded in some catalogs. Verify current availability before ordering.

Features

• 190 LPH (50 GPH) flow rate at 0 psi - delivers ample fuel volume for naturally aspirated and mildly modified engines up to approximately 350 horsepower
• Proven gerotor pump design provides reliable, low-noise operation with consistent pressure output across a wide operating range
• 39mm compact body diameter fits directly into the factory hanger assembly without modification for clean, professional installation
• 2nd generation GSS-style design compatible with existing TI Automotive/Walbro GSS-series hanger assemblies for flexible installation across multiple platforms
• High-pressure output rated at 43.5 PSI at 13.5V - suitable for most OEM and mildly upgraded EFI fuel systems
• Compact outside dimensions allow installation into many existing hanger assemblies beyond the primary application
• Manufactured and tested by TI Automotive (Walbro) to OEM-grade quality standards for long-term reliability

Specifications

• Part Number: F20000141
• Brand: Walbro / TI Automotive
• Pump Series: GSS (2nd Generation)
• Pump Style: In-Tank, Electric
• Body Diameter: 39mm
• Flow Rate: 190 LPH (50 GPH) at 0 psi
• Flow Rate at Pressure: 155 LPH at 40 psi (12V)
• Rated Fuel Pressure: 43.5 PSI at 13.5V
• Voltage: 12V
• Inlet Configuration: IOOP (Inlet-Outlet Opposing), 11mm Inlet
• Outlet: 5/16 in. Slip-On
• Fuel Compatibility: Gasoline only (NOT E85 or ethanol compatible)
• Maximum Supported Horsepower: ~350 HP (gasoline)
• Sold: Pump only (installation kit sold separately)

Included Components

• 1x Walbro F20000141 - 190 LPH GSS-Style In-Tank Electric Fuel Pump (bare pump only)

Product Description

The Walbro F20000141 is a 39mm 2nd generation GSS-style in-tank electric fuel pump designed as a direct-fit replacement for the 1998-2002 Honda Accord equipped with either the 2.3L I4 (F23A) or 3.0L V6 (J30A1) engine. Manufactured by TI Automotive under the Walbro brand, this pump flows 190 liters per hour at zero back-pressure and delivers 43.5 PSI at 13.5V - providing reliable, consistent fuel supply for OEM and mildly modified EFI applications capable of supporting up to approximately 350 horsepower on gasoline. The proven gerotor pump design is widely recognized for smooth, quiet operation, precise pressure output, and long service life, making it one of the most trusted in-tank pump platforms in the performance and OEM replacement market.

The compact 39mm body is specifically engineered to drop directly into the factory hanger assembly on the 1998-2002 Accord without modification, preserving the OEM fuel system architecture while delivering performance-grade fuel flow. The IOOP (Inlet-Outlet Opposing) inlet configuration and 11mm inlet size are designed to mate with the existing Accord fuel hanger and strainer arrangement. As a 2nd generation GSS-style pump, the F20000141 also shares dimensional compatibility with a broad range of TI Automotive/Walbro GSS-series hanger assemblies, making it a versatile option for other popular Honda and Acura EFI platforms with the appropriate installation hardware.

This listing includes the bare pump only - no installation kit, strainer, wiring, or hardware is included. An application-specific installation kit must be sourced separately to complete the installation properly. This pump is designed for gasoline use only and is not compatible with E85, flex fuel, or high-ethanol blends. For builds requiring higher flow rates, E85 compatibility, or support for power levels above 350 hp, a higher-capacity pump should be selected. Sold individually.