Vibrant 29052 -10AN PTFE Hose Assembly 24 in. Straight and 45-Degree Universal

Vehicle Fitment

• Universal - No vehicle-specific fitment. Compatible with any fuel, oil, nitrous, or coolant plumbing system using -10 AN connections requiring a pre-terminated 24 in. PTFE-lined flex hose assembly.

Fitment Notes

• Hose size: -10 AN. Hose length: 24 in. One straight hose end and one 45-degree hose end - confirm both end orientations suit your routing before ordering.
• Crimp-on fittings installed with a hydraulic crimping tool - not reusable hose ends. Assembly is pressure tested to rated working pressure before shipping.
• Not suitable for high-pressure hydraulic applications including brake or hydraulic clutch lines.
• Available in black anodized aluminum hose ends only.
• Available in -3 AN through -10 AN sizes, multiple lengths, and straight/45°, straight/90°, and 90°/90° end combinations across Vibrant's pre-assembled hose lineup.

Features

• Pre-terminated, ready-to-install PTFE flex hose assembly - eliminates hose end installation labor and tooling requirements
• PTFE inner liner provides full chemical compatibility with race fuels, E85, oil, coolant, and nitrous while eliminating fuel vapor permeation
• Braided nylon outer cover provides abrasion resistance in a lightweight, flexible package
• Crimp-on fittings installed with a hydraulic crimping tool for a factory-quality, leak-free connection
• Each assembly is pressure tested to its rated working pressure before shipment
• One straight hose end and one 45-degree hose end for versatile routing in a wide range of plumbing layouts
• 24 in. length provides additional reach versus the 18 in. variant (29051) for longer routing runs
• Backed by Vibrant's 1-year limited warranty

Specifications

• Part Number: 29052
• Hose Type: PTFE-Lined Braided Nylon Flex Hose
• AN Hose Size: -10 AN
• Hose Length: 24 in.
• Hose End Style: Straight (one end) / 45 Degrees (one end)
• Hose End Fitting Type: Crimp-On (hydraulic crimped, not reusable)
• Hose End Fitting Thread: -10 AN Female
• Hose End Material: 6061 Aluminum
• Hose End Finish: Black Hard Anodized
• Pressure Tested: Yes
• Compatible Fluids: Race Fuels, E85, Engine Oil, Coolant, Nitrous - NOT for brake or high-pressure hydraulic lines
• Quantity: Sold as Complete Assembly
• Warranty: 1 Year Limited Warranty

Included Components

• 1x Vibrant 29052 Pre-Terminated PTFE Flex Hose Assembly, -10 AN, 24 in., Straight / 45-Degree Ends, Black Anodized, Crimp-On Fittings

Product Description

The Vibrant 29052 is a pre-terminated -10 AN PTFE flex hose assembly measuring 24 in. in length, fitted with one straight hose end and one 45-degree hose end - both machined from 6061 aluminum with a black hard anodized finish and installed using hydraulic crimp-on tooling for a factory-quality, leak-free connection. The 24 in. length provides additional reach compared to the 18 in. variant (29051), making it the right choice for longer routing runs between the fuel pump, oil cooler, surge tank, or other -10 AN components. Each assembly is pressure tested to its rated working pressure before shipping, providing confidence in the completed line before installation.

The PTFE inner liner provides full chemical compatibility with race fuels including E85, oil, coolant, and nitrous, while eliminating the fuel vapor permeation common in rubber-lined alternatives. The braided nylon outer cover delivers a lightweight, flexible, and abrasion-resistant construction that is easy to route in tight underhood environments. Not suitable for high-pressure hydraulic applications including brake or hydraulic clutch lines. Part of Vibrant's pre-assembled hose lineup available in -3 AN through -10 AN sizes, multiple lengths, and a variety of hose end angle combinations. Sold as a complete assembly.