Tein GSH96-9USS2 Street Advance Z Coilovers for 94-01 Acura/Honda Integra

Vehicle Fitment

• 1994-2001 Acura Integra (DC2, FWD; 1.8L I4)
• 1994-2001 Acura Integra (DC4, FWD; 1.8L I4)

Features

• Tein Street Advance Z performance coilover suspension kit
• 16-way adjustable damping for tailored ride feel
• Twin-tube damper design optimized for street performance
• Height adjustable via threaded spring seats
• Corrosion-resistant powder-coated damper body
• OEM upper mounts reused (mounts not included)
• Full-length dust boots and Delrin thrust washers included
• Compatible with Tein EDFC in-car damping adjuster

Specifications

• Part Number: GSH96-9USS2
• Spring Rate Front: 9 kgf/mm (≈504 lb/in)
• Spring Rate Rear: 4 kgf/mm (≈224 lb/in)
• Front Ride Height Range: about -129 mm to -48 mm (-5.1" to -1.9")
• Rear Ride Height Range: about -103 mm to -30 mm (-4.1" to -1.2")
• Damping Adjustment: 16-stage (front & rear) click adjust
• Upper Mounts: Uses OEM front/rear mounts (not included)
• Drive Layout: Front-engine, front-wheel drive (FF)

Included Components

• 2x Front coilover damper assemblies
• 2x Rear coilover damper assemblies
• 4x Coil springs pre-matched to dampers
• 2x Hook spanners for spring seat adjustment
• 4x Spring seats and lock rings
• 4x Dust boots and rubber bump stops
• 4x Delrin thrust washers
• Installation instructions

Product Description

The Tein Street Advance Z Coilovers (Part # GSH96-9USS2) are a premium street-oriented suspension upgrade engineered for 1994-2001 Acura and Honda Integra models with front-wheel drive and 1.8L engines. Built around Tein's Street Advance Z platform, this kit delivers a broad range of ride height adjustment along with 16-stage damping control, allowing you to fine-tune the balance between comfort and performance for daily driving or spirited road use. With a twin-tube damper design and durable powder-coated finish, these coilovers hold up well in varied conditions while offering improved handling over stock suspension.

Ride height is adjustable by moving the threaded spring seats, enabling a significant drop for better stance and lower center of gravity - typically around -1.9" to -5.1" in front and -1.2" to -4.1" in rear. Damping settings are adjustable across 16 clicks so drivers can dial in a firmer feel for performance driving or a softer setup for everyday comfort. The kit reuses OEM upper mounts for a straightforward fitment, and it's compatible with Tein's EDFC in-car damping adjuster for real-time control from the cockpit. Professional installation and alignment are recommended for best results.