Tein GSH92-8USS2 Street Basis Z Coilovers for 1992-2002 Honda Prelude

Vehicle Fitment

• 1992-1996 Honda Prelude (BB1/BB2, FWD, 2.2L H22A H4)
• 1997-2001 Honda Prelude (BB6, FWD, 2.2L H22A4 H4)
• 1997-2001 Honda Prelude Type SH (BB6, FWD, 2.2L H22A4 H4)

Features

• TEIN Street Basis Z twin-tube coilover suspension system
• Thread-type ride height adjustment for customizable stance
• Twin-tube damper design provides longer stroke and improved ride comfort
• Corrosion-resistant powder-coated damper body with ZT-coated threaded sleeve
• High-tensile steel springs engineered to resist sagging
• Designed to reuse OEM upper mounts for simplified installation
• Dust boots protect piston rods from debris and contaminants
• Balanced setup designed for daily driving and sporty street performance

Specifications

• Part Number: GSH92-8USS2
• Product Type: Coilover Suspension Kit
• Damper Type: Twin-Tube
• Damping Adjustment: Fixed (non-adjustable)
• Ride Height Adjustment: Thread-type spring seat
• Front Spring Rate: 10 kg/mm (560 lb/in)
• Rear Spring Rate: 4 kg/mm (224 lb/in)
• Front Spring Length: 230 mm
• Rear Spring Length: 250 mm
• Front Spring Inner Diameter: 71 mm
• Rear Spring Inner Diameter: 70 mm
• Front Lowering Range: approx. -1.0 in to -4.1 in (-26 mm to -103 mm)
• Rear Lowering Range: approx. -1.0 in to -3.8 in (-26 mm to -97 mm)
• Upper Mounts: OEM mounts reused (not included)
• Drivetrain: FWD

Included Components

• 2x Front TEIN coilover shock assemblies
• 2x Rear TEIN coilover shock assemblies
• 4x Performance coil springs
• 4x Rubber bump stops
• 4x Dust boots
• 4x Adjustable spring seats
• 4x Spring locks
• 4x Delrin thrust washers
• 2x Hook spanner wrenches
• 1x Installation instruction manual
• 1x TEIN sticker sheet

Product Description

The TEIN Street Basis Z Coilover Kit (GSH92-8USS2) is designed for the 1992-2002 Honda Prelude platform, including BB1, BB2, and BB6 chassis models. This entry-level performance coilover system delivers improved handling and ride height adjustability while maintaining everyday driving comfort. The twin-tube damper construction allows longer suspension stroke compared with many monotube designs, helping the vehicle maintain stability over uneven road surfaces while providing confident cornering performance.

Ride height can be adjusted through a threaded spring seat design, allowing drivers to achieve a more aggressive stance while preserving usable suspension travel. The system offers a lowering range of approximately 1.0-4.1 inches in the front and 1.0-3.8 inches in the rear depending on setup. Spring rates are tuned at 10 kg/mm front and 4 kg/mm rear to balance front-wheel-drive chassis dynamics with street comfort. Designed to reuse OEM upper mounts, this kit provides straightforward installation and long-term durability with corrosion-resistant coatings and protective dust boots.