Synergy Mfg 7510-01 Dual Steering Stabilizer Bracket for 99-04 F-250/F-350

Vehicle Fitment

• 1999-2004 Ford F-250 Super Duty
• 1999-2004 Ford F-350 Super Duty

Fitment Notes

• Not guaranteed to fit 2WD platforms - confirm your truck is 4WD before ordering
• Compatible with the stock 1999-2004 tie rod; compatibility with aftermarket tie rods is not confirmed
• Compatibility with aftermarket differential covers is unknown - check clearance if you're running one
• This is the bracket only, for those assembling a custom dual-stabilizer setup - for a complete kit including stabilizers, see Synergy's part number 7510-30
• Fitment confirmed with King 2.0, FOX TS, and FOX ATS steering stabilizers specifically - other stabilizer brands/models are not confirmed compatible
• FOX TS or ATS stabilizers require two additional Synergy TS/ATS Clamp Adapters (4051-01), sold separately
• 4.75" backspacing or less required on wheels if running TS/ATS-style stabilizers, due to clearance
• Synergy's 1-1/2" stabilizer clamps (4050-75) are not required when using the recommended FOX TS/ATS stabilizers

Features

• Reinforced dual steering stabilizer bracket designed to isolate harsh steering inputs and reduce unwanted feedback through the wheel
• Supports two steering stabilizers for improved steering control versus a single-stabilizer factory setup
• Helps prevent uneven tire wear caused by steering-related vibration and wander
• Suitable for towing, daily driving, and aggressive wheel/tire setups where steering stability matters most
• Designed to pair with Synergy's tuned steering stabilizers for a matched, purpose-built setup
• Made in the USA

Specifications

• Type: Dual Steering Stabilizer Bracket
• Weight: 7 lbs
• Recommended Stabilizers: King 2.0, FOX TS, FOX ATS

Included Components

• 1x Dual Steering Stabilizer Bracket

Product Description

Super Duty trucks running larger wheels and tires or towing regularly put real strain on the factory single steering stabilizer, which can struggle to fully absorb the road feedback and steering wander that come with a heavier front-end setup. Synergy's 7510-01 addresses this by providing the reinforced mounting bracket needed to run a dual-stabilizer setup instead, giving the steering system twice the damping capacity to isolate harsh inputs and keep the wheel settled.

This bracket is confirmed compatible with the stock 1999-2004 tie rod and specific stabilizer models - King 2.0, FOX TS, and FOX ATS - with some stabilizer choices requiring additional clamp adapters or specific wheel backspacing to clear properly. It's designed as the bracket-only option for owners who want to source or already own their preferred stabilizers, rather than buying Synergy's complete pre-matched kit.

This part suits F-250/F-350 Super Duty owners experiencing steering wander or excessive feedback from aggressive tire setups, or anyone building a dual-stabilizer steering upgrade from individually selected components. Given the number of compatibility notes tied to specific stabilizer models and wheel backspacing, it's worth double-checking your exact stabilizer choice and wheel spec against Synergy's fitment notes before ordering - this isn't a universal bracket that works with any stabilizer on the market.