Synergy Mfg 8007 Steering Stabilizer Relocation Bracket for 07-18 Jeep Wrangler

Vehicle Fitment

• 2007-2018 Jeep Wrangler JK (2-Door), Left Hand Drive (LHD) - All Trims
• 2007-2018 Jeep Wrangler JKU (4-Door Unlimited), Left Hand Drive (LHD) - All Trims

Fitment Notes

• Left Hand Drive (LHD) applications only - for Right Hand Drive (RHD) JK, use Synergy 8094
• WARNING: Minimum 2" tall bump stop spacers are required for this bracket - without them, the bracket may contact the frame under full suspension compression
• WARNING: 2011 and newer JK/JKU models require Synergy Tie Rod Clamp (8003) - the factory clamp cannot be flipped and will interfere with the differential cover
• Fits any steering stabilizer with 1-3/8" mounting width and 1/2" mounting bolt
• Compatible with Fox Racing, Synergy, and most aftermarket steering stabilizers meeting the above spec
• Can be used with or without the Synergy Front Track Bar Bracket (8055)
• Steering stabilizer not included - bracket only; for a kit including a Fox 2.0 IFP stabilizer, see Synergy 8007-03

Features

• Relocates the steering stabilizer to a high-mount position, raising it up and out of harm's way on the trail
• Manufactured from high-strength 3/16" steel for maximum rigidity and resistance to trail impacts
• Black powder coat finish for long-term corrosion resistance
• 100% bolt-on installation - no cutting, welding, or drilling required
• Grade 8 hardware included for reliable, high-strength fastening
• Compatible with factory steering linkage - no geometry changes required
• Pairs with Synergy Drag Link, Tie Rod, and Track Bar for a complete JK steering upgrade
• Backed by Synergy Manufacturing Limited Lifetime Warranty

Specifications

• Part Number: 8007
• Material: 3/16" high-strength steel
• Finish: Black powder coat
• Drive Side: Left Hand Drive (LHD) only
• Stabilizer Compatibility: 1-3/8" mounting width, 1/2" bolt
• Minimum Bump Stop Spacers Required: 2"
• Installation: 100% bolt-on, grade 8 hardware included
• Country of Origin: USA
• Warranty: Limited Lifetime

Included Components

• 1x Steering Stabilizer Relocation Bracket (3/16" steel, powder coated)
• 1x Grade 8 Hardware Kit
• 1x Installation Instructions

Product Description

The Synergy Manufacturing 8007 is a steering stabilizer relocation bracket for the 2007-2018 Jeep Wrangler JK and JKU (Left Hand Drive). On a lifted JK, the factory steering stabilizer drops low relative to the front axle and becomes vulnerable to trail damage from rocks and other obstacles. The 8007 bracket relocates the stabilizer to a high-mount position above the tie rod, providing significantly more front-end clearance on the trail and protecting the stabilizer from impacts that could compromise steering function. The bracket accommodates any steering stabilizer with a 1-3/8" mounting width and 1/2" mounting bolt, making it compatible with Fox Racing, Synergy, and most quality aftermarket stabilizers.

The bracket is machined from 3/16" high-strength steel and finished with a black powder coat for corrosion resistance. Installation is fully bolt-on using the included grade 8 hardware, with no cutting or welding required. Two important notes: minimum 2" bump stop spacers are required to prevent bracket-to-frame contact at full suspension compression; and 2011+ JK/JKU owners must use the Synergy 8003 Tie Rod Clamp, as the factory clamp cannot be flipped on these years without interfering with the differential cover. The bracket is designed to work with or without the Synergy Front Track Bar Bracket (8055). For a complete kit including a Fox 2.0 Performance IFP stabilizer, see Synergy 8007-03. RHD applications use Synergy 8094. Backed by Synergy Manufacturing's Limited Lifetime Warranty.