SuperPro TRCHILUXDD Front Diff Drop Kit 25mm for Toyota Hilux Prado Fortuner 4WD

Vehicle Fitment

• 2005-2015 Toyota Hilux 4WD (N70, KUN26, GGN25)
• 2015-2026 Toyota Hilux 4WD (N80, GGN, GUN)
• 2005-2015 Toyota Fortuner (AN50, AN60, TGN51, 4WD)
• 2002-2010 Toyota Land Cruiser Prado (120 Series, 4WD)
• 2010-2026 Toyota Land Cruiser Prado (150 Series, 4WD)
• 2007-2014 Toyota FJ Cruiser (GSJ15, 4WD)
• 2003-2026 Toyota 4Runner (4WD)
• 2003-2009 Lexus GX470 (4WD)
• 2010-2026 Lexus GX460 (4WD)

Fitment Notes

• Designed for lifted 4WD vehicles only - not required or recommended for stock ride height applications.
• Kit is designed to allow the original bash plate to be refitted after installation where applicable.
• Intended to correct increased CV joint angles caused by suspension lifts; wear is further accelerated when larger or wider wheels and tires are fitted.

Features

• Lowers the front differential approximately 25mm (1") to correct CV joint operating angles on lifted vehicles.
• Reduces CV joint stress and boot splitting caused by excessive axle angles after a suspension lift.
• Helps extend the service life of CV joints and boots, avoiding costly drivetrain repairs.
• Bolt-on design - no cutting, welding, or permanent modifications required.
• Compatible with OEM bash plate reinstallation for continued underbody protection.
• Supplied complete with all required spacers, bolts, washers, and nuts.
• Engineered and manufactured in Australia to SuperPro's strict quality standards.
• 3-year warranty on all metal components.

Specifications

• Position: Front Differential (Drop/Relocation Kit)
• Differential Drop Amount: Approximately 25mm (1")
• Application: Lifted 4WD vehicles
• Kit Contents: 6x Spacers, 6x Bolts, 8x Washers, 2x Nuts
• Warranty: 3 Years on metal components

Included Components

• 6x Differential Drop Spacers
• 6x Mounting Bolts
• 8x Washers
• 2x Nuts

Product Description

The SuperPro TRCHILUXDD Front Differential Drop Kit is an essential upgrade for lifted Toyota and Lexus 4WD vehicles. When a suspension lift is fitted, the front CV axles operate at steeper-than-designed angles, accelerating wear on CV joints and boots and leading to premature - and expensive - drivetrain failures. This problem is compounded further when larger aftermarket wheels and tires are installed. The TRCHILUXDD addresses this by relocating the front differential approximately 25mm downward, bringing the CV joints back into a more optimal operating angle and significantly extending drivetrain service life.

The kit is a straightforward bolt-on solution requiring no permanent modifications to the vehicle. It is compatible with the factory underbody bash plate, which can be refitted after installation to maintain underbody protection. All necessary hardware - spacers, bolts, washers, and nuts - is included, making this a complete, ready-to-install solution for owners of lifted Hilux, Prado, Fortuner, FJ Cruiser, 4Runner, GX460, and GX470 vehicles.