SPL Parts RE NC Front/Rear Swaybar Endlinks for Mazda NC Miata MX-5 RX-8 FE

Vehicle Fitment

• 2006-2015 Mazda MX-5 Miata (NC chassis) - all variants including PRHT
• 2003-2012 Mazda RX-8 (FE chassis) - all variants

Fitment Notes

• Universal front/rear design - one pair fits either the front OR rear sway bar axle position. If endlinks are needed for both front and rear, two kits (two pairs) must be purchased.
• Sold as a pair - one pair per axle position. Two pairs required for full front and rear coverage.
• If aftermarket coilovers or shocks have been installed, the sway bar mounting location may have changed. Verify correct length before ordering and contact SPL Parts if a custom length is needed.

Features

• SPL Parts PRO adjustable sway bar endlinks for the 2006-2015 Mazda NC MX-5 Miata and 2003-2012 Mazda RX-8 - universal front/rear design suitable for either sway bar axle position, eliminating preload and providing maximum load capacity for OEM or stiffer aftermarket sway bars
• FK 1/2" Teflon-lined spherical bearings provide maximum load capacity for sustained side forces from stiff aftermarket sway bars - significantly exceeding the load rating of OEM endlinks on either axle of the NC Miata and RX-8 FE platform
• Custom heat-treated Chromoly high-misalignment studs with 65° of articulation - prevent endlink binding when using different adjustment holes on aftermarket sway bars at lowered ride heights, at either the front or rear
• Length-adjustable design eliminates sway bar preload caused by spring settling, corner weighting, or uneven ride heights - enabling accurate anti-roll balance tuning at both ends of the vehicle
• Suitable for street, autocross, track days, and racing applications - designed, engineered, and assembled in the USA by SPL Parts

Specifications

• Part Number: RE NC
• Brand: SPL Parts
• Product Type: Adjustable Front/Rear Sway Bar Endlinks (PRO Series - Universal)
• Axle: Front or Rear (universal - one pair per axle position)
• Bearings: FK 1/2" spherical bearings with Teflon (PTFE) lining
• High Misalignment Stud Material: Heat-treated Chromoly steel
• Articulation: 65° maximum
• Sold As: Pair (2 pieces - fits ONE axle position; purchase two pairs for front and rear)
• Origin: Made in USA

Included Components

• 2x Adjustable sway bar endlink assemblies (FK 1/2" PTFE-lined bearing, Chromoly high-misalignment stud, adjustable body)

Product Description

The SPL Parts RE NC are PRO Series adjustable sway bar endlinks for the 2006-2015 Mazda NC MX-5 Miata and 2003-2012 Mazda RX-8 (FE chassis). Unlike most SPL endlink products which are axle-specific, the RE NC is a universal design that can be installed at either the front or rear sway bar - providing flexibility for builds that only need to address one end of the car, while allowing full coverage when two kits are purchased. These endlinks eliminate sway bar preload - the unwanted tension or compression caused by spring settling, corner weighting, or ride height differences - which creates an unpredictable handling bias that undermines anti-roll balance tuning and handling consistency.

FK 1/2" Teflon-lined spherical bearings handle the sustained side loads of stiff aftermarket sway bars on both axes, while custom heat-treated Chromoly high-misalignment studs (65° articulation) prevent binding at lowered ride heights or when using different sway bar adjustment positions. One pair fits either the front or rear axle - two pairs are required for complete front and rear coverage. Sold as a pair, made in the USA by SPL Parts.