SPL Parts FE Z33 Front Swaybar Endlinks for Nissan 350Z Infiniti G35 G37x AWD

Vehicle Fitment

• 2003-2008 Nissan 350Z (Z33)
• 2003-2006 Infiniti G35 Sedan (V35)
• 2003-2007 Infiniti G35 Coupe (V35)

Fitment Notes

• AWD Infiniti applications (G37x, Q50x, Q60x) only - the non-AWD Nissan 370Z, non-AWD Infiniti G37, and non-AWD Q50/Q60 use a different front sway bar geometry and require SPL part #FE Z34. Verify your vehicle's drivetrain configuration before ordering.
• Sold as a pair - one pair covers the front axle. One pair per vehicle required.
• If aftermarket coilovers or shocks have been installed, the sway bar or shock mounting location may have changed. Contact SPL Parts if you need a custom length for your specific setup.

Features

• SPL Parts PRO adjustable front sway bar endlinks for the Nissan 350Z (Z33), Infiniti G35 (V35), and AWD Infiniti G37x, Q50x, and Q60x - eliminate sway bar preload caused by spring settling, corner weighting, or uneven ride heights, and provide maximum load capacity for OEM or stiffer aftermarket sway bars
• FK 1/2" Teflon-lined rod ends provide maximum load capacity for sustained side forces from stiff aftermarket sway bars - significantly exceeding the load rating of OEM ball-joint or rubber endlinks on the Z33 platform
• Custom heat-treated Chromoly high-misalignment studs with 65° of articulation - prevent endlink binding when using different adjustment holes on adjustable aftermarket sway bars at lowered ride heights
• Adjustable spacers allow precise positioning of the endlink for optimal alignment with the sway bar mounting hole on adjustable aftermarket sway bars
• Length-adjustable via black anodized 6061-T6 aluminum turnbuckles with left and right hand threads - simple and precise adjustment to achieve true sway bar neutral for any suspension setup
• Designed, engineered, and assembled in the USA by SPL Parts

Specifications

• Part Number: FE Z33
• Brand: SPL Parts
• Product Type: Adjustable Front Sway Bar Endlinks (PRO Series)
• Bearings: FK 1/2" rod ends with Teflon (PTFE) lining
• High Misalignment Stud Material: Heat-treated Chromoly steel
• Articulation: 65° maximum
• Turnbuckle Material: 6061-T6 Aluminum, black anodized
• Fitment: 350Z (Z33), G35 (V35), 
• Sold As: Pair (2 pieces)
• Origin: Made in USA

Included Components

• 2x Adjustable front sway bar endlink assemblies (FK 1/2" PTFE-lined rod end, Chromoly high-misalignment stud, 6061-T6 aluminum turnbuckle)
• Adjustable positioning spacers

Product Description

The SPL Parts FE Z33 are PRO Series adjustable front sway bar endlinks for the 2003-2008 Nissan 350Z (Z33), 2003-2007 Infiniti G35 (V35), variants sharing the same front sway bar geometry. These endlinks eliminate sway bar preload - the unwanted tension or compression placed on the sway bar by uneven spring settling, corner weighting, or ride height differences between corners - which undermines anti-roll balance tuning and creates an unpredictable handling bias. The length-adjustable turnbuckle design allows the endlinks to be set to the precise neutral length for any suspension configuration.

FK 1/2" Teflon-lined rod ends handle the sustained side loads generated by stiff aftermarket sway bars, while custom heat-treated Chromoly high-misalignment studs (65° articulation) prevent binding at lowered ride heights or when using different adjustment positions on aftermarket sway bars. Adjustable positioning spacers allow the endlink to be precisely aligned with the sway bar mounting hole for optimal geometry. Note: the non-AWD Nissan 370Z and non-AWD Infiniti G37 require SPL #FE Z34 due to different front sway bar geometry. Sold as a pair, made in the USA by SPL Parts.