SPC 67110 Rear Adjustable Camber Arm -1 Deg to +3 Deg BMW E36 E46 E85 Z4 X3 Tubular

Vehicle Fitment

• 1992-1999 BMW 3 Series (E36): 318i / 318ic / 318is, 323i / 323ic / 323is / 323ti, 325i / 325ic / 325is, 328i / 328ic / 328is, M3
• 1999-2006 BMW 3 Series (E46): 323i / 323Ci, 325i / 325Ci / 325xi, 328i / 328Ci, 330i / 330Ci / 330xi, M3
• 2003-2008 BMW Z4 (E85/E86): Z4 2.5i, Z4 3.0i, Z4 3.0Si, Z4 M Coupe, Z4 M Roadster
• 2004-2010 BMW X3 (E83): X3 2.5i, X3 3.0i, X3 3.0si, X3 xDrive28i, X3 xDrive30i

Fitment Notes

• Replaces OEM rear lower lateral control arm - OEM part number 33326770813 on E36 and E46 3 Series; OEM part number 33326760675 on E85/E86 Z4 models
• Sold individually - one arm per wheel; 2 required for complete bilateral rear camber correction
• This is a tubular steel arm - for high-performance racing or time attack applications requiring maximum stiffness and lighter weight, SPC offers the billet aluminum version (SPC #72110) as a separate product; the 67110 tubular arm is the recommended choice for street-driven and dual-purpose builds
• Compatible with stock ride height vehicles as well as lowered builds - the -1.0° to +3.0° range accommodates both OEM-spec correction and intentional camber setting
• After setting rear camber with this arm, factory rear toe adjustment provisions remain intact and can be used to set final toe without additional hardware
• SPC limited lifetime warranty applies; professional installation recommended

Features

• -1.0° to +3.0° rear camber adjustment (4.0° total range) - covers OEM camber restoration on stock-height vehicles, correction of negative camber induced by lowering springs or coilovers, and dialing in negative camber for performance driving and track applications on E36, E46, Z4, and X3 platforms
• Tubular steel construction - the arm body uses a tubular steel design that provides strong weight-to-strength performance in daily street and performance driving use; the tubular form factor is lighter than a solid forged arm while delivering the durability needed for sustained road use and moderate performance driving
• Direct bolt-in replacement for the OEM rear lower lateral control arm - installs in the factory mounting points using OEM hardware; no chassis modification, drilling, or fabrication required
• Addresses the alignment limitation common to all lowered E36/E46/E85 and E83 builds - the factory rear camber adjustment eccentric on these platforms has a narrow range that is quickly exhausted once ride height is reduced; inner rear tire wear and alignment pull that cannot be corrected through available factory adjustment provisions are the result; the SPC 67110 restores camber adjustment capability across the full -1.0° to +3.0° range
• Compatible with stock ride height vehicles - also useful for correcting factory camber deviation on unmodified vehicles where the OEM eccentric range is insufficient to bring the vehicle within specification
• Widely used in the E36 and E46 tuner, drift, and road course communities - the 67110 is one of the most established and commonly specified rear camber solutions for these platforms, backed by decades of field use in street, autocross, and track applications
• Estimated installation time: ~1.3 hr/side - longer than bushing-replacement solutions because the arm itself must be removed and reinstalled; plan for suspension disassembly access when scheduling installation

Specifications

• Part Number: 67110
• UPC: 082642671107
• Brand: SPC Performance (Specialty Products Company)
• Type: Adjustable Rear Camber Arm (Lower Lateral)
• Construction: Tubular steel
• Adjustment Range: -1.0° to +3.0° rear camber (4.0° total)
• Position: Rear lower lateral control arm
• Quantity: Sold individually (1 per wheel) - 2 required for both sides
• Installation Time: ~1.3 hr/side
• OEM Part Replaced: 33326770813 (E36/E46) / 33326760675 (E85/E86 Z4)
• Billet Upgrade Available: SPC #72110
• Warranty: SPC Lifetime Warranty
• Application: 1992-1999 BMW E36 / 1999-2006 BMW E46 / 2003-2008 BMW E85/E86 Z4 / 2004-2010 BMW E83 X3

Included Components

• 1x SPC 67110 Adjustable Rear Camber Arm - tubular steel construction

Product Description

The SPC 67110 is a tubular steel adjustable rear camber arm for the 1992-1999 BMW 3 Series (E36), 1999-2006 BMW 3 Series (E46), 2003-2008 BMW Z4 (E85/E86), and 2004-2010 BMW X3 (E83). It replaces the fixed-length OEM rear lower lateral control arm (OEM #33326770813 on E36/E46; #33326760675 on E85/E86 Z4) with an adjustable unit that provides -1.0° to +3.0° of rear camber correction - 4.0° total range - to address the alignment constraints that develop when these platforms are lowered or when factory adjustment provisions are insufficient to bring a stock-height vehicle within specification.

The SPC 67110 is the long-established standard solution for rear camber correction on the E36 and E46 platform. These chassis feature a factory rear camber eccentric that provides a limited correction range - adequate for minor factory variation but quickly exhausted once coilovers or lowering springs are installed. The result is persistent negative camber that causes accelerated inner tire wear, alignment pull, and degraded handling balance. The 67110 installs directly in place of the factory arm using OEM mounting hardware and fully replaces the eccentric-based factory adjustment with a continuously variable arm-length adjustment. After setting camber, the factory rear toe cam remains functional for dialing in final toe without additional hardware.

The arm is constructed from tubular steel, offering a balance of weight savings over solid-section alternatives and sufficient structural strength for sustained street, autocross, and road course use. For demanding track-only or time attack applications requiring maximum rigidity and minimum weight, SPC's billet aluminum version (#72110) is the recommended upgrade. The 67110 is sold individually for one wheel - two are required for bilateral rear camber correction. Installation requires approximately 1.3 hours per side as the arm itself must be removed and replaced rather than a bushing pressed in place. The 67110 carries SPC's lifetime warranty.