SPAL 30103011 5.2in Low-Profile Puller Fan 12V, Made in Italy

Vehicle Fitment

• Universal - mounts to any radiator, oil cooler, transmission cooler, or condenser using universal brackets and shrouds. Suitable for automotive, motorcycle, and ATV applications.

Fitment / Spec Conflict Warning

• CRITICAL: Sources disagree significantly on this fan's core specs. The majority of retailers (including Summit Racing's detailed spec sheet) list 342 CFM, 4.80 amp draw, and no mention of a sealed rating. One source lists 313 CFM, 2.2 amp draw, and an IP68 sealed (waterproof/dustproof) rating for the same part number. The nearly 2x difference in amp draw suggests these may be two genuinely different fan variants rather than a simple rounding discrepancy - possibly a sealed vs. non-sealed version sold under the same or a very similar part number. Confirm the exact spec sheet for this part directly with SPAL before publishing CFM or amp draw figures, since amp draw directly affects the required fuse/relay/wiring sizing for a safe install.

Features

• Compact 5.2" (5-1/4") low-profile design for tight installation spaces
• Puller (suction) configuration - mounts behind the radiator or cooler to pull air through the core
• Can be used as part of a multi-fan configuration for additional airflow
• Mounting brackets included
• Made in Italy
• Suited to auxiliary oil coolers, compact radiators, transmission coolers, and side-mount intercooler setups

Specifications

• Fan diameter: 5.2 in. (5.510 in. housing height/width)
• Thickness: 2.287-2.36 in. (varies slightly by source)
• Airflow type: Puller
• Motor type: Brushed
• Voltage: 12V
• CFM: 342 (majority of sources) or 313 (one source) - see conflict warning above
• Amp draw: 4.80A (majority of sources) or 2.2A (one source) - see conflict warning above
• Blades: 5, plastic, black
• Shroud: Black plastic
• Model: VA31-A101-46A
• Mounting hardware: Brackets included; fasteners not included
• Quantity: Sold individually

Included Components

• 1x SPAL 30103011 low-profile puller fan
• Mounting brackets

Product Description

The SPAL 30103011 is a compact 5.2-inch puller fan built for cooling applications where space is tight but reliable airflow still matters - auxiliary oil coolers, small radiators, transmission coolers, and similar confined mounting locations that a full-size radiator fan won't fit into. As a puller, it mounts behind the core to draw air through it, and can be combined with additional fans in a multi-fan setup where more total airflow is needed.

Manufactured in Italy with SPAL's typical build quality, it's designed for use with a fused 12V circuit and relay control, and pairs with SPAL's own harness accessories for a clean electrical install rather than requiring improvised wiring.

Given the real conflict in core specifications found across retailers for this exact part number - differing significantly on CFM, amp draw, and whether the unit carries a sealed IP68 rating - I'd treat this as needing direct verification with SPAL before publishing. The amp draw figure in particular matters for correctly sizing a fuse and relay, so getting this wrong isn't just a cosmetic spec error.