SPAL 30100402 6.5 in Low Profile 325 CFM 12V Straight Blade Puller Electric Fan

Vehicle Fitment

• Universal Fitment - Compatible with automotive oil coolers, transmission coolers, heat exchangers, AC condensers, radiators, and intercoolers across all vehicle types including cars, trucks, motorcycles, ATVs, buses, off-highway equipment, and agricultural machinery requiring a 12V puller fan in a 6.5 in. diameter / low-profile form factor

Fitment Notes

• Puller (suction) orientation - mounts on the downstream face of the cooling core (oil cooler, heat exchanger, radiator, or condenser) and pulls air through from front to back; do not use in a pusher configuration
• Blade sweep diameter is 6.5 in. (165.1 mm); overall shroud dimensions are 7.24 in. H x 7.02 in. W x 2.03 in. D (184 mm x 178.2 mm x 51.6 mm); verify all clearances before installation
• Mounting pins are NOT included - 4x SPAL Fan Mounting Pin Kit (30130013) are required per fan; for CBR and Long TruCool oil coolers, SPAL's 30130013 1/16 in. pins are the preferred mounting solution and must be installed at approximately a 45° angle; SPAL plastic slide-on mounting brackets are available separately for offset mounting applications
• Wiring relay and thermostat/controller are not included and must be sourced separately; a 15A fuse at 13V is specified by SPAL for this fan; SPAL relay harness kits are sold separately
• Designed for 12V DC electrical systems only
• Sold individually (1x fan)

Features

• 325 CFM airflow output in a compact 6.5 in. diameter / low-profile form factor - the smallest diameter fan in SPAL's standard low-profile straight-blade series; designed specifically for compact oil coolers, small heat exchangers, and space-constrained installations including CBR-style oil coolers, motorcycle radiators, ATV oil cooling circuits, and tight intercooler locations where 9 in. and larger fans are physically too large
• IP68-rated fully sealed motor - meets IP68 waterproof and dustproof certification, providing protection against sustained water immersion and fine dust ingress; suitable for the most demanding exposed, underbody, off-road, and outdoor equipment installations
• Low-profile design at 2.03 in. (51.6 mm) depth - allows installation in depth-restricted locations directly against compact oil cooler cores, heat exchanger faces, and motorcycle/ATV cooling systems with minimal clearance behind the core
• 10-blade straight blade design - maintains efficient airflow delivery through the dense, high static pressure cores of compact oil coolers and heat exchangers where curved-blade designs can lose performance
• Individually balanced fan blade assembly - each SPAL fan is factory-balanced to minimize vibration, reduce bearing wear, and extend service life under continuous operation in temperature-critical cooling applications
• 5.90A rated current draw - the lowest amp draw in SPAL's standard low-profile straight-blade fan series, enabling use in powersports vehicles, motorcycles, ATVs, and other applications with limited electrical system capacity
• Popular for oil cooler and motorcycle/ATV applications - widely used by performance and racing builders as a direct-fit fan for CBR-style and TruCool-style compact oil coolers and as a lightweight supplemental cooling fan in space-constrained powersports builds
• SPAL ISO/TS-16949 certified manufacturing - SPAL supplies electric fans and blowers to OEM automotive, truck, bus, agricultural, military, and marine manufacturers worldwide; all aftermarket products are manufactured to the same OEM-level standards
• Made in Italy

Specifications

• Part Number: 30100402
• SPAL Model: VA22-AP11/C-50A
• UPC: 816211020177
• Fan Type: Puller (Suction)
• Fan Profile: Low Profile
• Blade Style: Straight Blade
• Blade Count: 10
• Blade Diameter: 6.5 in. (165.1 mm)
• Overall Height: 7.24 in. (184 mm)
• Overall Width: 7.02 in. (178.2 mm)
• Installation Depth: 2.03 in. (51.6 mm)
• Airflow: 325 CFM
• Voltage: 12V DC
• Amp Draw: 5.90A
• Recommended Fuse: 15A (at 13V)
• Motor Type: Brush (Standard)
• Motor Sealing: IP68 (Waterproof/Dustproof)
• Shroud Material: Black Plastic
• Mounting: 4x SPAL 30130013 mounting pins required (sold separately)
• Country of Manufacture: Italy
• ISO Certification: ISO/TS-16949
• Quantity: Sold individually

Included Components

• 1x SPAL 30100402 6.5 in. Low-Profile Straight Blade Puller Electric Fan (with integrated black plastic shroud)

Product Description

The SPAL 30100402 (model VA22-AP11/C-50A) is a 6.5 in. low-profile electric puller fan rated at 325 CFM and 12V DC, the smallest diameter fan in SPAL's standard low-profile straight-blade product family. It is designed specifically for compact oil coolers, small heat exchangers, CBR-style oil coolers, and space-constrained motorcycle and ATV cooling applications where 9 in. and larger fans are too large to mount. At 7.24 in. x 7.02 in. with an installation depth of just 2.03 in., the 30100402 fits against the downstream face of compact oil cooler and heat exchanger cores where clearance is critically limited. Kartek Off-Road recommends this fan for TruCool long-style oil coolers using SPAL's 30130013 1/16 in. pins at approximately 45°, and it is widely used in motorsport and off-road builds as a direct-fit fan for CBR-style oil cooler assemblies.

The motor carries an IP68 ingress protection rating - fully sealed against sustained water immersion and fine dust - making it appropriate for exposed underbody oil cooler installations, off-road vehicle heat exchangers, and outdoor equipment. At 5.90A draw, the 30100402 has the lowest electrical consumption in SPAL's standard low-profile fan lineup, making it well-suited to motorcycles, ATVs, and other powersports applications where alternator output and battery capacity are limited. The 10-blade straight blade design moves air efficiently through the dense, restrictive cores of compact oil coolers and heat exchangers, maintaining consistent airflow where curved-blade designs can lose performance. Each fan is individually balanced at the factory to minimize vibration and extend bearing life under continuous operation.

Mounting pins are not included with this fan - 4x SPAL 30130013 mounting pin kits are required per fan and must be purchased separately. For installations on Long TruCool oil coolers, these pins go in at approximately 45° due to core geometry. SPAL plastic slide-on brackets are also available for offset mounting. A relay and wiring harness must be sourced separately for a complete installation; a 15A fuse at 13V is specified by SPAL for this fan. SPAL is an ISO/TS-16949 certified OEM manufacturer producing fans in Italy, and the 30100402 is backed by SPAL's manufacturer warranty.