Skyjacker H7093 Hydro 7000 Front Shock Ford F-250 F-350 Dodge Ram 1500 2500

Vehicle Fitment

• 1994-2001 Dodge Ram 1500 (4WD) - Front, 4-5 in. Lift
• 2014-2018 Dodge Ram 2500 (4WD) - Front, 4-5 in. Lift
• 2018 Dodge Ram 3500 (4WD) - Front, 4-5 in. Lift
• 2014-2018 Ram 2500 (4WD) - Front, 4-5 in. Lift
• 2018 Ram 3500 (4WD) - Front, 4-5 in. Lift
• 2005-2018 Ford F-250 Super Duty (4WD) - Front, 6-7 in. Lift
• 2005-2018 Ford F-350 Super Duty (4WD) - Front, 6-7 in. Lift

Fitment Notes

• Fits the front shock position only; all supported applications are 4WD configurations
• Sold individually - purchase two (2) for a complete front axle replacement
• This shock serves two distinct lift ranges depending on the platform:
  • Dodge Ram 1500 (1994-2001) and Dodge/Ram 2500/3500 (2014-2018): Front, 4-5 in. lift
  • Ford F-250 and F-350 Super Duty (2005-2018): Front, 6-7 in. lift
• Verify your specific lift height against the appropriate platform before ordering - using a shock matched to the wrong lift range will result in incorrect suspension geometry and poor damping performance
• Upper mount is Stem; lower mount is Eyelet/Sleeve - these match the factory front shock mounting hardware on all supported platforms at the stated lift heights
• "Dodge Ram 2500" and "Ram 2500" are both listed in the compatibility table and refer to the same vehicles across the 2014-2018 production run (Dodge/FCA used both brand names during this period)
• For the 2005-2016 Ford F-250/F-350 Super Duty at lower lift heights (factory to 4 in.), use a different Skyjacker front shock matched to that lift range
• Factory mounting hardware is reused; all necessary washers, bushings, and nuts are included

Features

• True velocity-sensitive hydraulic valving adapts front damping resistance to actual suspension speed in real time - critical at the 4-7 in. lift range where front suspension travel is significantly increased over stock, placing higher dynamic demands on the shock through its full stroke
• Orifice disk design ensures optimal hydraulic fluid flow for smooth, consistent damping across the long 10.78 in. stroke available at these lift heights on both the Dodge Ram and Ford Super Duty platforms
• Leak-proof hydraulic seal construction provides reliable, long-service-life performance under the demanding front suspension loads of lifted heavy-duty full-size trucks in off-road and towing-oriented use
• Bonded iron piston provides the strength and fatigue resistance needed for the heavier front axle loads and increased wheel travel common to lifted half-ton and heavy-duty truck applications
• Chrome-plated piston rod resists corrosion, surface damage, and pitting from road debris and trail exposure, protecting the hydraulic seal throughout the shock's service life
• Stem upper and Eyelet/Sleeve lower mount hardware provides a direct-fit match to the front shock mounting geometry on all supported applications at the stated lift heights
• Distinctive red protective boot shields the shock shaft from trail debris, moisture, and road grime - the Hydro 7000 series signature
• Backed by Skyjacker's Limited Lifetime Warranty against defects in materials and workmanship

Specifications

• Part Number: H7093
• Series: Hydro 7000
• Position: Front (Driver Side or Passenger Side)
• Extended Length: 26.65 in. (676.91 mm)
• Compressed Length: 15.87 in. (403.10 mm)
• Stroke: 10.78 in. (273.81 mm)
• Internal Design: Hydraulic (Non-Gas Charged)
• Valving: True Velocity-Sensitive / Orifice Disk
• Gas Charged: No
• Adjustable Valving: No
• Upper Mount Type: Stem
• Lower Mount Type: Eyelet/Sleeve
• Piston Type: Bonded Iron
• Shaft Finish: Chrome-Plated
• Boot Color: Red
• Lift Height Compatibility: 4-5 in. Front Lift (Dodge Ram 1500/2500/3500); 6-7 in. Front Lift (Ford F-250/F-350 Super Duty)
• Quantity: Sold Individually (1 per pack)

Included Components

• 1x Skyjacker H7093 Hydro 7000 Front Shock Absorber
• 1x Red Protective Dust Boot
• All necessary washers, bushings, and nuts for installation

Product Description

The Skyjacker H7093 Hydro 7000 is a front shock absorber serving two distinct heavy-duty truck platforms at lifted heights: the 1994-2001 Dodge Ram 1500 and the 2014-2018 Dodge/Ram 2500 and 3500 at 4 to 5 inches of front lift, and the 2005-2018 Ford F-250 and F-350 Super Duty at 6 to 7 inches of front lift. The shared Stem upper and Eyelet/Sleeve lower mount geometry, combined with 26.65 in. extended and 15.87 in. collapsed dimensions providing 10.78 in. of stroke, covers both applications despite their different lift ranges - the front suspension geometry of these platforms at these heights converges on compatible mounting points and shock travel requirements.

On the Ford Super Duty side, the H7093 is the 6-7 in. front lift option for the 2005-2018 F-250 and F-350 4WD - a wide generation span covering the P3 (2005-2007), P415 (2008-2010), P475 (2011-2016), and the 2017-2018 generation Super Duty trucks. On the Dodge/Ram side, it handles front lift for the BR-generation Ram 1500 (1994-2001) and the DS-generation Ram 2500/3500 (2014-2018). The H7093 pairs with the H7092 rear shock in Skyjacker's matched sets for the 2014-2024 Ram 2500 at 2 in. lift, and is used as a standalone front shock for other lift configurations on these platforms.

The Hydro 7000 non-gas-charged hydraulic design with velocity-sensitive valving delivers real-time damping adjustment across the full stroke range required at these lift heights - progressive compliance over gradual road and trail inputs, firm and controlled damping through sharp impacts and off-road terrain. All installation hardware is included; factory mounting bolts are reused. Sold individually - two required for a complete front axle upgrade. Backed by Skyjacker's Limited Lifetime Warranty for the original retail purchaser.