Skyjacker H7063 Hydro 7000 Rear Shock Jeep Cherokee XJ Wrangler TJ 6-8in Lift

Vehicle Fitment

• 1984-2001 Jeep Cherokee XJ (4WD) - Rear, 6-8 in. Lift
• 1997-2006 Jeep Wrangler TJ (4WD) - Rear, 6-8 in. Lift

Fitment Notes

• Fits the rear shock position only; all supported applications are 4WD solid-rear-axle configurations
• Sold individually - purchase two (2) for a complete rear axle replacement
• Designed for 6-8 in. of rear suspension lift - this shock is dimensioned specifically for high-lift configurations on these platforms; using it at lower lift heights will result in incorrect shock geometry and suspension travel
• The Jeep Cherokee XJ (1984-2001) and Wrangler TJ (1997-2006) share the same rear shock mounting geometry - Bar Pin upper and Eyelet/Sleeve lower - across the full range of years listed; the H7063 fits both body styles using the same shock dimensions
• For lower lift heights on these platforms, use the appropriate Skyjacker Hydro 7000 part number matched to your lift range (e.g., H7023 for 1-3 in. lift, other part numbers for 3.5-5 in. lift)
• The Wrangler TJ Unlimited (LJ) shares the same rear shock mounting geometry at this lift range - confirm applicability for LJ with your specific lift kit before ordering
• Factory mounting hardware is reused; all necessary washers, bushings, and nuts are included

Features

• True velocity-sensitive hydraulic valving adapts rear damping resistance to actual suspension speed in real time - providing compliance over gradual trail inputs and controlled damping over large, fast impacts at high-lift suspension travel depths
• Orifice disk design ensures optimal hydraulic fluid flow, providing consistent and responsive damping through the full extended travel range available at 6-8 in. of rear lift on these Jeep platforms
• Leak-proof hydraulic seal construction minimizes maintenance requirements for vehicles used in demanding off-road environments including rock crawling, trail riding, and lifted daily driving
• Bonded iron piston provides superior strength and fatigue resistance through the sustained high-cycle off-road use characteristic of lifted XJ and TJ builds
• Chrome-plated piston rod resists corrosion, pitting, and surface damage from trail debris and moisture exposure, protecting the hydraulic seal and maintaining consistent performance over the life of the shock
• Bar Pin upper mount engages cleanly with the factory-style upper rear shock mount on both the Cherokee XJ and Wrangler TJ rear suspension
• Distinctive red protective boot shields the shock shaft from trail debris and mud - the Hydro 7000 series signature
• Backed by Skyjacker's Limited Lifetime Warranty against defects in materials and workmanship

Specifications

• Part Number: H7063
• Series: Hydro 7000
• Position: Rear (Driver Side or Passenger Side)
• Extended Length: 27.33 in. (694.18 mm)
• Compressed Length: 16.05 in. (407.67 mm)
• Stroke: 11.28 in. (286.51 mm)
• Internal Design: Hydraulic (Non-Gas Charged)
• Valving: True Velocity-Sensitive / Orifice Disk
• Gas Charged: No
• Adjustable Valving: No
• Upper Mount Type: Bar Pin
• Lower Mount Type: Eyelet/Sleeve
• Piston Type: Bonded Iron
• Shaft Finish: Chrome-Plated
• Boot Color: Red
• Lift Height Compatibility: 6-8 in. Rear Suspension Lift
• Quantity: Sold Individually (1 per pack)

Included Components

• 1x Skyjacker H7063 Hydro 7000 Rear Shock Absorber
• 1x Red Protective Dust Boot
• All necessary washers, bushings, and nuts for installation

Product Description

The Skyjacker H7063 Hydro 7000 is a rear shock absorber purpose-built for 6 to 8 inches of rear suspension lift on the 1984-2001 Jeep Cherokee XJ and the 1997-2006 Jeep Wrangler TJ - two of the most heavily modified Jeep platforms in the off-road market. At this lift range, factory-length shocks are dramatically undersized, with insufficient extended length to allow full suspension droop and inadequate travel to prevent binding. The H7063's 27.33 in. extended and 16.05 in. compressed dimensions are engineered specifically for the rear suspension geometry of these Jeeps at 6-8 in. of lift, providing the correct shock travel for proper axle articulation on the trail without overextension or coil-over binding at full droop.

The Bar Pin upper and Eyelet/Sleeve lower mounts match the rear shock mounting hardware used on both the Cherokee XJ and Wrangler TJ across their full production runs - a shared geometry that allows a single part number to serve both platforms at this lift range. The Hydro 7000 hydraulic design with velocity-sensitive valving delivers real-time damping adjustment based on suspension speed: progressive and compliant over slow articulation on rocky terrain, and firmer and more controlled over high-speed whoops, ledges, and trail obstacles. The non-gas-charged hydraulic design avoids the temperature and altitude sensitivity of gas-pressurized shocks, providing consistent performance across the wide range of climates and environments where lifted XJs and TJs are used.

For lower lift heights on these platforms, different Skyjacker Hydro 7000 part numbers apply - the H7063 is specifically the 6-8 in. rear lift option and should not be used at lower ride heights. All installation hardware is included; factory mounting bolts are reused. Sold individually - two required for a complete rear axle upgrade. Backed by Skyjacker's Limited Lifetime Warranty for the original retail purchaser.