RockJock CE-9114N-14 2.5in Narrow Forged Johnny Joint 1-1/4in RH Thread

Vehicle Fitment

• Universal - Designed for custom off-road suspension fabrication and replacement applications
• Commonly used in RockJock adjustable control arms and custom suspension builds on Jeep Wrangler (TJ, LJ, JK, JL), Jeep Gladiator (JT), Jeep Cherokee (XJ), Jeep Grand Cherokee (ZJ/WJ), and other solid-axle off-road platforms

Fitment Notes

• Threaded forged rod end - threads directly into components with a 1 1/4 in.-12 RH threaded receiver; no welding required
• 2.365 in. mounting width with offset ball - narrower than the base CE-9114N (2.625 in.); confirm mounting width and clearance requirements before ordering
• .562 in. thru-bolt bore (9/16 in.) - no bolt included; source separately to match application
• Uses narrow-body-specific one-piece urethane internals - not interchangeable with standard-body internals
• Left-hand thread version available as CE-9114NL-14
• Rebuild kit CE-9110NRK (2 1/2 in. Narrow) available separately for long-term serviceability
• Do NOT over-grease - use a hand pump grease gun only; pneumatic or electric grease guns can damage the joint

Features

• Narrow body design allows up to 42 degrees of total unrestricted articulation - significantly more than both standard heim joints (22°) and standard-body Johnny Joints (30°)
• One-piece high-performance urethane bushing unique to the narrow-body family provides a firm, responsive feel and high load capacity
• Heat-treated center ball cross-drilled for thru-bolt lubrication and extended service life
• Offset ball configuration at 2.365 in. mounting width for tight clearance applications
• External zerk fitting allows quick, tool-free greasing without disassembly
• Gold zinc plated finish for corrosion resistance in off-road and daily-driven environments
• Fully rebuildable using CE-9110NRK narrow rebuild kit
• Backed by RockJock's Limited Lifetime Warranty

Specifications

• Joint O.D.: 2.500 inches
• Body Type: Narrow Forged Steel (Threaded)
• Body Width: 1.685 inches
• Ball Size: 2.365 in. x .562 in. (Offset Ball)
• Mounting Width: 2.365 inches
• Thru-Bolt Hole: .562 inches (9/16 in.)
• Thread Size: 1 1/4 in.-12 RH (Right Hand)
• Thread Shank Length: 2 1/4 inches (3 1/4 inches total)
• Bushing Material: One-Piece High-Performance Urethane (Narrow-Body Specific)
• Greasing Method: External Zerk Fitting / Cross-Drilled Center Ball
• Finish: Gold Zinc Plating
• Articulation: Up to 42 degrees total (narrow body)
• Bolt Included: No
• Rebuild Kit: CE-9110NRK (2 1/2 in. Narrow)
• Origin: Made in USA
• Warranty: Limited Lifetime

Included Components

• 1x Johnny Joint 2 1/2 in. Narrow Forged Rod End with 1 1/4 in.-12 RH Thread (CE-9114N-14)
• Note: Thru-bolt is NOT included

Product Description

The RockJock CE-9114N-14 is a 2 1/2-inch narrow-body forged Johnny Joint rod end with a 1 1/4 in.-12 RH threaded shank and a 2.365 in. x .562 in. offset ball. It delivers the larger 1 1/4-inch thread diameter of the CE-9114 family in a narrow-body configuration, providing up to 42 degrees of total articulation - exceeding both standard heim joints (22°) and standard-body Johnny Joints (30°). The 2.365 in. offset mounting width is narrower than the base CE-9114N (2.625 in.), making it the right choice when tight suspension clearances require a more compact ball footprint without sacrificing thread size or bore diameter.

The one-piece high-performance urethane bushing is unique to the narrow-body family and provides a firm, load-capable response with excellent weather resistance. The heat-treated center ball is cross-drilled for thru-bolt lubrication, and an external zerk fitting allows routine greasing without disassembly. No thru-bolt is included - source a 9/16 in. bolt separately. A left-hand thread equivalent is available as CE-9114NL-14. The joint is fully rebuildable using RockJock's CE-9110NRK narrow rebuild kit and backed by a Limited Lifetime Warranty.