Rancho RS77326 RS7MT Front Monotube Shock for 2007-2018 Jeep Wrangler JK 0-2"

Vehicle Fitment

• 2007-2011 Jeep Wrangler JK Sport (4WD, 3.8L V6, Front, 0-2" Lift)
• 2007-2011 Jeep Wrangler JK Sahara (4WD, 3.8L V6, Front, 0-2" Lift)
• 2007-2011 Jeep Wrangler JK Rubicon (4WD, 3.8L V6, Front, 0-2" Lift)
• 2007-2011 Jeep Wrangler Unlimited JK Sport (4WD, 3.8L V6, Front, 0-2" Lift)
• 2007-2011 Jeep Wrangler Unlimited JK Sahara (4WD, 3.8L V6, Front, 0-2" Lift)
• 2007-2011 Jeep Wrangler Unlimited JK Rubicon (4WD, 3.8L V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler JK Sport (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler JK Sport S (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler JK Sahara (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler JK Rubicon (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler Unlimited JK Sport (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler Unlimited JK Sport S (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler Unlimited JK Sahara (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)
• 2012-2018 Jeep Wrangler Unlimited JK Rubicon (4WD, 3.6L Pentastar V6, Front, 0-2" Lift)

Fitment Notes

• Fits all 2007-2018 Jeep Wrangler JK and JK Unlimited (2-door and 4-door) models at factory stock height and with up to 2" of front lift installed
• For front lift heights greater than 2", use a longer extended-travel front shock - the RS77329 fits 2-3" front lift; the RS77331 fits 3-4" lift
• Does not fit the 2018+ Jeep Wrangler JL or Gladiator JT - those require a different shock part number (see RS77067)
• Designed to install rod up using the factory OEM stud upper mount and eyelet lower mount - no drilling, modification, or additional hardware required
• Sold individually - two shocks are required for a complete front axle replacement
• No boot included - optional protective boots RS1952 or RS1961 are available separately from Rancho

Features

• Monotube design with full-floating dividing piston - high-pressure nitrogen gas is permanently separated from the hydraulic oil, eliminating aeration and delivering consistent, fade-free damping even on sustained rock crawling, trail driving, or aggressive terrain use
• Deflective Disc Valving tuned specifically to the JK Wrangler's front suspension - digressive response at low shaft velocities for a compliant daily ride, transitioning progressively under harder inputs to maintain trail composure and handling precision
• 2-inch (50mm) monotube body filled with all-weather fluid for superior heat dissipation under sustained off-road use - makes the RS77326 particularly well-suited to JKs running larger tires and frequent trail use
• 46mm Fluon/PTFE-banded piston delivers consistent seal between piston and monotube body for precise damping control over the shock's full service life
• 14mm hardened chrome piston rod - superior to standard chrome rods in resistance to galling and corrosion from trail debris, mud, and moisture
• Integrated dirt wiper sealing system prevents moisture, dirt, and trail debris from entering the monotube body and contaminating the internal oil or destroying the main seal
• Internal rebound bumper reduces noise, vibration, and harshness for a smoother ride both on- and off-road
• Double-welded loops at stress areas, double-strength closure method, and hot-form reserve tube provide structural integrity through extreme suspension articulation and trail impacts
• Application-specific mounting - installs directly with no sleeves or additional hardware required, using factory JK front shock mount locations
• Bold black satin finish with Rancho red logo for a performance appearance under the JK's fenders

Specifications

• Part Number: RS77326
• Series: RS7MT (Monotube)
• Position: Front
• Lift Height: 0-2" Front Lift
• Internal Construction: Single-Tube Monotube
• Extended Length: 23.42" (594.9mm)
• Compressed Length: 15.24" (387.1mm)
• Travel Length: 8.18" (207.8mm)
• Body Diameter: 2.0" (50mm)
• Piston Diameter: 46mm (Fluon/PTFE-Banded)
• Piston Rod Diameter: 14mm Hardened Chrome Steel
• Top Mount: OEM Stud/Stem (upper mount)
• Bottom Mount: Loop/Eyelet
• Finish: Black Satin
• Boot Included: No (RS1952 or RS1961 available separately)
• Hardware Included: Yes (factory mounting hardware reused; no sleeves required)
• Warranty: Rancho Limited Lifetime Warranty

Included Components

• 1x Rancho RS7MT Front Monotube Shock Absorber (RS77326)
• 1x Hardware Kit

Product Description

The Rancho RS77326 is a front monotube shock absorber from the RS7MT series, engineered specifically for the 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JK at factory ride height or with up to 2" of front lift installed. It covers every JK trim level - Sport, Sahara, and Rubicon in both 2-door and 4-door configurations - across the full production run of the JK platform, from the 3.8L V6 (2007-2011) through the 3.6L Pentastar V6 (2012-2018). As an RS7MT monotube shock, the RS77326 offers a meaningful step up from the RS5000X twin-tube shocks that come standard on most JK trims. The monotube construction uses a full-floating dividing piston to permanently separate high-pressure nitrogen gas from the hydraulic oil - eliminating the aeration and foaming that causes damping fade in twin-tube designs, especially during hard off-road use, rock crawling, or sustained trail driving.

The deflective disc valving is application-tuned to the JK's front suspension geometry and typical use profile - providing a digressive response at low shaft velocities that makes for a comfortable daily driver, while transitioning to a stiffer progressive response under harder trail or road inputs. The 2-inch monotube body dissipates heat far more effectively than twin-tube equivalents, making the RS77326 well-suited to JKs running oversized tires or those that spend frequent time on demanding trails. The 14mm hardened chrome piston rod and integrated dirt wiper sealing system add durability against the mud, water, and debris that Wrangler front shocks are routinely exposed to. The RS77326 is a direct-fit replacement using the factory JK stud upper mount and eyelet lower mount - no drilling, modification, or shock mount conversion brackets required.

For JK owners with more than 2" of front lift, Rancho's RS77329 (2-3" lift) and RS77331 (3-4" lift) provide extended-length front shock options in the same RS7MT monotube series. The RS77326 does not fit the 2018+ Wrangler JL or Gladiator JT, which have a different front suspension design and require the RS77067. Sold individually with a hardware kit - two shocks are needed for a complete front axle replacement. Backed by Rancho's Limited Lifetime Warranty, the RS77326 is a proven monotube upgrade for JK Wrangler owners seeking improved heat resistance, fade reduction, and off-road damping performance while maintaining daily driver comfort.