Progress Tech 67.10.120 Adj Rear End Link Kit for 2008-2017 Honda Accord / Acura

Vehicle Fitment

• 2008-2017 Honda Accord (LX, LX-P, LX-S, EX, EX-L, Sport, Sport Special Edition, Touring - Coupe/Sedan, FWD/AWD, 8th and 9th Gen)
• 2014-2015, 2017 Honda Accord Hybrid (Hybrid, Hybrid EX-L, Hybrid Touring, FWD)
• 2014 Honda Accord Plug-In (FWD)
• 2011-2012 Honda Accord SE (Sedan, FWD)
• 2009-2014 Acura TSX (Base, Special Edition - Sedan, FWD)
• 2010-2014 Acura TSX V6 (Sedan, FWD)
• 2011-2014 Acura TSX Sport Wagon (FWD)

Fitment Notes

• Rear axle position - designed as the companion end link kit for Progress rear sway bars 62.0105 (22.2mm) and 62.0107 (25.4mm tubular) for this platform
• Adjustment range is 110mm-132mm center to center - verify OEM end link length before ordering to confirm this range covers your application
• Sold as one pair (2 end links) - fits one sway bar / one rear axle
• Thread specification: M10-1.25 - confirm compatibility with your existing sway bar and suspension mounting hardware
• Can also be used to replace worn or failed OEM rear end links on compatible vehicles, independent of a sway bar upgrade

Features

• HD ball-socket end design provides a super-quiet, rattle-free connection between the sway bar and the rear suspension - eliminates the clicking, knocking, and wear associated with OEM rubber-bushed end links
• 3-piece construction - HD ball-socket ends threaded into a machined aluminum center connector - allows precise length adjustment within the 110-132mm range for zero sway bar pre-load and accurate corner weight
• Adjustable threaded design allows fine-tuning of end link length for optimal sway bar geometry - critical for eliminating pre-load when used with an aftermarket adjustable rear sway bar
• Machined aluminum center connector reduces weight compared to all-steel alternatives while maintaining the structural rigidity required for performance driving applications
• M10-1.25 thread specification matches the rear suspension mounting hardware on TSX and Accord platforms for a direct, clean installation
• Heavy-duty construction designed for sustained performance driving and long-term reliability with minimal maintenance required
• Designed and manufactured in-house in the USA by Progress Technology

Specifications

• Part Number: 67.10.120
• Construction: 3-piece (HD ball-socket ends + machined aluminum center connector)
• Position: Rear
• Adjustment Range: 110mm-132mm (center to center)
• Thread Specification: M10-1.25
• Sold as: 1 pair (2 end links - fits one sway bar / one rear axle)
• Origin: Made in the USA

Included Components

• 2x HD Ball-Socket Adjustable Rear End Links (1 pair)
• 4x M10-1.25 Flange Nuts
• 2x M10-1.25 Jam Nuts

Product Description

The Progress Tech 67.10.120 is a 3-piece adjustable HD rear end link kit designed for the 2008-2017 Honda Accord (8th and 9th Gen) and the 2009-2014 Acura TSX, including the TSX Sport Wagon. This kit serves as the companion end link upgrade for the Progress rear sway bars 62.0105 and 62.0107 for these platforms, and it is equally effective as a direct OEM end link replacement on vehicles where the factory rubber-bushed links have worn out, developed play, or are producing noise. The adjustable length range of 110-132mm center to center covers the rear end link requirements of these platforms, and the 3-piece design allows precise tuning to eliminate sway bar pre-load - a critical setup step when pairing with an adjustable aftermarket rear bar.

The 3-piece construction uses Progress's latest HD ball-socket ends threaded into a machined aluminum center connector. The ball-socket design fundamentally eliminates the bushing compliance and wear that causes OEM rubber end links to click, knock, and loosen over time. The result is a direct, solid mechanical connection from sway bar to lower control arm that transmits roll stiffness immediately and consistently - without the lag or play inherent in worn rubber bushings. The machined aluminum center connector reduces weight relative to steel alternatives while providing the rigidity required for sustained performance use. The entire assembly threads on M10-1.25 hardware, matching the factory mounting specification on both platforms.

Each kit includes one pair of adjustable end links - sufficient to equip one rear sway bar - along with four M10-1.25 flange nuts and two M10-1.25 jam nuts. Installation requires no special tools and is straightforward: set each end link to the appropriate length, install, and torque to specification. For installations paired with an adjustable sway bar, Progress recommends adjusting end link length so the bar sits at zero pre-load before torquing for an optimal baseline setup. The 67.10.120 is designed and manufactured in-house in the USA by Progress Technology.