Ohlins MAS MP00S1 Road & Track DFV Monotube Coilover Kit 2016-2024 Mazda MX-5 ND

Vehicle Fitment

• 2015-2024 Mazda MX-5 Miata (ND, All Trims)
• 2015-2024 Mazda MX-5 RF (ND RF, All Trims)
• 2016-2020 Fiat 124 Spider (shares ND platform)

Fitment Notes

• This is the Road Setup (MAS MP00S1) with 70 N/mm front springs - the Track Setup (MAS MP00S2) uses 100 N/mm front springs and is a separate product; confirm which setup suits your application before ordering
• Both front and rear units use the vehicle's original OE top mounts - OE mounts are required for installation and are not included; confirm they are in serviceable condition before proceeding
• Front and rear ride height are independently adjustable; target ride height is approximately 20mm lower than OE at the front and 15mm lower at the rear with the recommended setup; overall adjustable range is approximately 5-30mm below standard
• Dampers are fully rebuildable and can be revalved or supplied with alternative spring rates (including the 100 N/mm track spring) through an authorized Ohlins service center
• Professional installation recommended; mounting instructions and owner's manual are included
• Sold as a complete coilover kit - springs and mounting hardware included

Features

• Patented Dual Flow Valve (DFV) technology - exclusive to Ohlins Road & Track; provides matched damping characteristics on both compression and rebound strokes, allowing the tire to return to the road surface faster after any input for improved grip, traction, and cornering response
• Single-knob damping adjustment simultaneously changes compression and rebound damping - allowing rapid mode switching between road comfort and track stiffness across 20+ click settings per corner
• 20+ click individual damping adjustment range per damper for precise, corner-by-corner tuning of suspension response and handling balance
• Monotube damper architecture delivers faster thermal management, more consistent damping under repeated track inputs, and greater sensitivity at low shaft speeds compared to twin-tube designs
• Independent front spring preload and ride height adjustment; independent rear spring preload and ride height adjustment - allows precise corner-by-corner setup without affecting adjacent adjustments
• Road-optimized spring rates (70 N/mm front / 40 N/mm rear) tuned specifically for the ND Miata platform to deliver the right balance of compliance and control for dual street/track use - the same rear rate as the MAS MP00S2 Track setup, with a softer front spring for improved daily comfort
• Fully rebuildable design allows revalving, rebuilding, and spring rate changes through an Ohlins authorized service center to extend service life or adapt for different applications
• All dampers corrosion-tested to ISO 9227 for long-term durability in road and track environments
• Backed by Ohlins' worldwide 2-year limited warranty

Specifications

• Part Number: MAS MP00S1
• Series: Ohlins Road & Track (R&T) - Road Setup
• Technology: Patented DFV (Dual Flow Valve)
• Damper Design: Monotube - Conventional Front and Rear; Fully Rebuildable
• Damping Adjustment: 20+ Click, Individually Adjustable Per Corner
• Adjustment Type: Single-Knob - Adjusts Compression and Rebound Simultaneously
• Front Ride Height Adjustment: Independent Spring Preload and Ride Height
• Rear Ride Height Adjustment: Independent Spring Preload and Ride Height
• Target Front Ride Height: ~20mm Lower Than OE (Recommended Setup)
• Target Rear Ride Height: ~15mm Lower Than OE (Recommended Setup)
• Adjustable Range: ~5-30mm Below Standard (Front and Rear)
• Front Spring Rate: 70 N/mm (Road Setup)
• Rear Spring Rate: 40 N/mm
• Front Upper Mounts: OE Mounts Required - not included
• Rear Upper Mounts: OE Mounts Required - not included
• Corrosion Testing: ISO 9227
• Warranty: 2-Year Worldwide Limited
• Sold As: Complete coilover kit with springs and mounting hardware

Included Components

• 2x Front Monotube Strut Assemblies with Springs (70 N/mm)
• 2x Rear Monotube Shock Assemblies with Springs (40 N/mm)
• Mounting Hardware Kit
• Owner's Manual
• Mounting Instructions

Product Description

The Ohlins MAS MP00S1 is the Road Setup variant of the Road & Track coilover system engineered for the 2015-2024 Mazda MX-5 Miata and MX-5 RF (ND generation) and the 2016-2020 Fiat 124 Spider. Built around Ohlins' patented Dual Flow Valve (DFV) technology, the system provides matched damper fluid flow characteristics on both compression and rebound strokes - allowing the tire to return to the road surface faster after each input for sharper grip and more balanced cornering. The Road Setup uses a 70 N/mm front spring rate optimized for daily comfort and dual street/track use, compared to the stiffer 100 N/mm front spring of the MAS MP00S2 Track Setup; the rear rate is 40 N/mm in both configurations.

Front and rear ride height are independently adjustable via separate spring preload and ride height collars, targeting approximately 20mm of front lowering and 15mm of rear lowering below OE with the recommended setup, across an overall adjustable range of roughly 5-30mm. Damping is tunable across 20+ clicks per corner via a single gold adjuster knob. Both front and rear units use the vehicle's original OE top mounts, which must be sourced from the vehicle. The monotube dampers are fully rebuildable and can be revalved or fitted with alternative spring rates - including upgrade to the 100 N/mm track spring - through an Ohlins authorized service center. Backed by a 2-year worldwide limited warranty and corrosion-tested to ISO 9227.