MOMO 3507 Steering Wheel Hub Adapter for Nissan 200SX 240SX 300ZX Sentra 6-Bolt

Vehicle Fitment

• 1984-2002 Nissan 200SX (Base, XE, SE, SE-R, Turbo, RWD)
• 1989-1994 Nissan 240SX (S13, Base, XE, SE, LE - without HICAS; S13 with cruise control use this hub)
• 1984-1988 Nissan 300ZX (Base, 2+2, Turbo)
• 1985-1988 Nissan Maxima
• 1987-1993 Nissan Pathfinder
• 1983-1986 Nissan Pulsar NX
• 1983-1990 Nissan Sentra
• 1987-1990 Nissan Stanza
• 1990 Nissan Axxess (XE, SE)
• 1986-1997 Nissan Hardbody Pickup (D21)

Fitment Notes

• For Nissan 240SX (S13): fits non-HICAS models only. S13 cars with cruise control use this hub (#3507). S13 without cruise control and all S14 (1995-1998) 240SX use MOMO hub #3508.
• For Nissan 300ZX: fits 1984-1988 (Z31) models. For 1990+ non-turbo 300ZX (Z32), use MOMO hub #3508.
• For Nissan Sentra: fits 1983-1990 models only. 1991-1996 Sentra uses MOMO hub #3508.
• For Nissan Maxima: fits 1985-1988 models. 1989-1998 Maxima uses MOMO hub #3508.
• This hub is designed for aftermarket steering wheel installation only - the factory OEM steering wheel cannot be reinstalled using this hub.
• Not compatible with vehicles equipped with an SRS airbag system unless the airbag is properly disabled and applicable resistor wiring is addressed.
• Compatible with MOMO, Sparco, OMP, Simoni Racing, and any other 6-bolt aftermarket steering wheel using a 70mm PCD pattern. Not directly compatible with Nardi or Personal wheels (74mm PCD) without a separate PCD adapter.

Features

• Collapsible hub design with an engineered crush zone - absorbs impact energy in a collision, dramatically increasing driver safety compared to rigid hub alternatives.
• MOMO is credited as the inventor of the collapsible steering wheel hub - a patented safety innovation now recognized across the motorsport and performance aftermarket industry.
• Cast aluminum construction provides a lightweight yet rigid connection between the steering column and the aftermarket steering wheel.
• Splined aluminum base precisely matches the OEM spline count and diameter of the Nissan steering shaft for a secure, wobble-free fit.
• Pre-drilled 6-bolt mounting face accepts all steering wheels using the standard MOMO 6 x 70mm PCD bolt pattern.
• Matte black powdercoated finish resists corrosion and provides a clean, professional appearance inside the cockpit.
• Plastic bellows cover conceals the collapsible steel center section for a finished, factory-quality appearance after installation.
• Designed and manufactured in Italy to MOMO's motorsport quality standards - used in professional racing environments worldwide.

Specifications

• Part Number: 3507
• UPC: 8024055003481
• Product Type: Steering Wheel Hub / Boss Kit
• Material: Cast Aluminum (body), Collapsible Steel (center section)
• Finish: Matte Black Powdercoat
• Bolt Pattern: 6-bolt, 70mm PCD (MOMO/Sparco/OMP pattern)
• Steering Column Spline Count: 34
• Steering Column Shaft Diameter: 17mm
• Horn Button Included: No
• Quantity: Sold individually

Included Components

• 1x MOMO 3507 Collapsible Steering Wheel Hub Adapter
• 1x Plastic Bellows Cover
• 1x Mounting Hardware Set

Product Description

The MOMO 3507 is a vehicle-specific collapsible steering wheel hub adapter engineered for a wide range of classic and sport compact Nissan platforms, including the 200SX (1984-2002), 240SX S13 (1989-1994, non-HICAS), 300ZX Z31 (1984-1988), Maxima (1985-1988), Sentra (1983-1990), Pulsar NX (1983-1986), Pathfinder (1987-1993), Stanza (1987-1990), Axxess (1990), and Hardbody Pickup (1986-1997). It is the required interface component between the vehicle's factory steering column and any aftermarket steering wheel using the standard MOMO 6 x 70mm PCD bolt pattern - including wheels from MOMO, Sparco, OMP, and Simoni Racing.

What distinguishes MOMO's hub adapters from generic alternatives is the patented collapsible center section design. Most aftermarket steering wheels have rigid outer rims that do not deform in a collision as OEM steering wheels are designed to do. The MOMO 3507 compensates for this by engineering a collapse zone into the hub's steel tower structure, which deforms under high-impact force and absorbs energy - providing an additional layer of driver safety in the event of a frontal collision. This safety-first engineering approach is the reason MOMO is recognized as the originator of the collapsible hub concept and remains the benchmark in the aftermarket steering wheel hub segment.

The 3507's splined aluminum base is precision-machined to match the 34-spline, 17mm steering shaft found on covered Nissan applications, ensuring a zero-wobble, direct-fit installation. Important application notes: on the Nissan 240SX S13, this hub fits non-HICAS-equipped cars only, and S13 chassis with cruise control are the primary application - S13 cars without cruise control and all S14 240SX models require the MOMO 3508 instead. A compatible horn button (sold separately) is required for horn functionality after installation. The 3507 is compatible with any quick-release hub system using the standard MOMO bolt pattern, making it a natural base for track, time attack, and drift builds that require quick-release capability.