Mishimoto MMSBH-10-3 Stainless Steel Braided Hose 10AN 36in Universal Oil Cooler

Vehicle Fitment

• Universal - suitable for any vehicle or application requiring a pre-assembled -10AN braided stainless steel fluid line. Commonly used for oil cooler feed and return lines, turbocharger oil feed and drain lines, fuel lines, coolant lines, and vacuum lines. Custom routing and bracket fabrication may be required depending on the specific application.

Fitment Notes

• Universal fitment. This hose is not a direct-fit, vehicle-specific kit. The installer is responsible for verifying that -10AN connections are appropriate for their specific fittings, adapters, and cooler inlet/outlet ports. Verify that all mating components (sandwich plates, cooler end tanks, banjo fittings, adapters) accept -10AN male or female connections before purchase.
• Hose length: 3 ft (36 in). Measure the required routing length, including any bends, before selecting a hose length. Other lengths in this series include 4 ft (MMSBH-10-4), 5 ft (MMSBH-10-5), and 6 ft (MMSBH-10-6).
• Fittings are pre-installed and swivel-type, allowing for repositioning and alignment adjustment during installation without loosening the fitting from the hose.
• Maximum operating pressure: 750 PSI. Operating temperature range: -40°F to +300°F (-40°C to +149°C).
• Compatible fluids: petroleum-based oil, fuel, diesel, engine coolant, and vacuum/air applications.

Features

• Pre-assembled 3-foot (36-inch) -10AN stainless steel braided hose - ships ready to install with one 90-degree swivel -10AN fitting and one straight swivel -10AN fitting already crimped to the hose ends, eliminating the need for field assembly and reducing the risk of improper fitting installation.
• Stainless steel outer braid provides resistance to abrasion, chafing, and corrosion - unlike rubber lines that can degrade, stiffen, crack, and eventually leak from contact with hot engine bay surfaces, exhaust heat, and environmental exposure, the stainless braid maintains its structural integrity across the full service life of the hose.
• CPE (chlorinated polyethylene) rubber inner core provides chemical resistance to petroleum-based fuels, motor oil, diesel, and engine coolant - suitable for the full range of fluid types encountered in performance engine bay plumbing applications.
• 90-degree and straight swivel -10AN fittings allow the hose to be routed cleanly in confined spaces without placing bending stress on the hose near the fitting ends - the 90-degree fitting in particular allows routing parallel to a bulkhead or component face, reducing the minimum bend radius required at connection points.
• 750 PSI maximum pressure rating provides a substantial safety margin for oil cooler and fuel line applications, which typically operate well below this threshold even in modified or boosted applications.
• Operating temperature range of -40°F to +300°F covers the full range of engine bay conditions from cold-soak startup in extreme climates to sustained high-temperature running under track or tow load.
• Lightweight and flexible - the stainless braid construction is significantly lighter than rigid hard-line alternatives and can be routed around engine bay obstacles without the need for bending tools or fabrication equipment.
• Backed by the Mishimoto Lifetime Warranty.

Specifications

• Hose Length: 3 ft (36 in)
• Fitting Size: -10AN (both ends)
• Fitting 1: Straight swivel -10AN
• Fitting 2: 90-degree swivel -10AN
• Outer Braid: Stainless steel
• Inner Core: CPE rubber
• Maximum Pressure: 750 PSI
• Operating Temperature Range: -40°F to +300°F (-40°C to +149°C)
• Fluid Compatibility: Petroleum oil, fuel, diesel, coolant, vacuum/air
• Assembly: Pre-assembled (fittings factory-crimped)

Included Components

• 1x Fully assembled stainless steel braided hose, 3 ft, with pre-installed -10AN straight swivel fitting and -10AN 90-degree swivel fitting
• Mishimoto Lifetime Warranty

Product Description

The Mishimoto MMSBH-10-3 is a 3-foot (36-inch) pre-assembled stainless steel braided fluid hose terminated with -10AN swivel fittings - one straight and one 90-degree - factory-crimped to the hose ends and ready to install. The hose is designed as a universal component for custom oil cooler plumbing, turbocharger oil feed and drain lines, fuel system routing, and any other application where a -10AN flexible braided line is required. It is a foundational component in Mishimoto's oil cooler ecosystem, pairing directly with their oil sandwich plates, inline thermostats, and oil cooler cores to complete a custom circuit without requiring field assembly of AN fittings.

The stainless steel outer braid provides abrasion and corrosion resistance across the full service life of the hose - a meaningful advantage over rubber lines in performance engine bays where lines are routed near exhaust components, sharp edges, or other heat and abrasion sources. The CPE rubber inner core is chemically compatible with petroleum-based oil, fuel, diesel, and coolant, making the hose suitable for all standard automotive fluid line applications within the -10AN size range. The swivel fitting design at both ends allows the hose to be connected and aligned without needing to rotate the hose body, enabling clean routing in tight spaces without placing torsional stress on the braid.

The 750 PSI maximum pressure rating and -40°F to +300°F operating temperature range cover the demands of street, track, and performance applications under sustained load. The 3-foot length accommodates most single-run oil cooler line routing distances on compact and mid-size engine bays; longer versions are available in 4-foot (MMSBH-10-4), 5-foot (MMSBH-10-5), and 6-foot (MMSBH-10-6) configurations for larger vehicles or longer routing paths. Covered by the Mishimoto Lifetime Warranty.