Method MR70777563550 707 Bead Grip Matte Black 17x7.5 6x130 +50mm Van Universal

Vehicle Fitment

• Universal fitment - fits any vehicle with a 6x130mm bolt pattern, 84.1mm or compatible hub bore, and sufficient brake clearance
• Common applications include: Mercedes-Benz Sprinter 2500 (2010-2026), Mercedes-Benz Sprinter 3500XD (2010-2026), Freightliner Sprinter 2500, and Dodge Sprinter Van 2500

Fitment Notes

• This is a universal product - always verify bolt pattern, offset, hub bore, and brake clearance before purchasing
• Hub bore is 84.1mm - hub rings may be required for vehicles with a different hub bore diameter
• Sprinter vans may require aftermarket cone-seat lug bolts (not included) - verify lug type for your specific application before ordering
• Valve stem is strategically positioned on the wheel face for protection during off-road and van life use
• Does not include lug nuts or lug bolts - purchase separately to match your vehicle's thread pitch and seat type
• Sold individually (1 wheel per listing)

Features

• Patented Bead Grip® technology - grooves integrated into both the inner and outer bead seats engage the tire bead for increased grip at low air pressures, enabling safe tire deflation without a traditional beadlock
• Aggressive safety hump on inner and outer bead seats provides a further barrier against de-beading on loose terrain
• Reinforced inner lip design derived from Method's race wheel program for added structural strength
• Rally-inspired multi-spoke design adapted from Method's 407 UTV Bead Grip wheel with debossed METHOD logo on outer lip
• Matte black finish with protective clear coat for long-term durability on and off road
• Solid A356 aluminum construction with T6 heat treatment for a strong, lightweight build
• Snap-in center cap with embossed METHOD Bead Grip® logo included
• 3,640 lb. load rating - capable of handling commercial van and overland build demands
• Backed by Method's lifetime structural warranty and 2-year finish warranty

Specifications

• Part Number: MR70777563550
• Wheel Diameter: 17 inches
• Wheel Width: 7.5 inches
• Bolt Pattern: 6x130mm
• Offset: +50mm
• Backspacing: 6.20 inches
• Hub Bore: 84.1mm
• Load Rating: 3,640 lbs.
• Wheel Weight: 30.5 lbs.
• Construction: 1-Piece Cast Aluminum
• Finish: Matte Black
• Lug Count: 6

Included Components

• 1x Method MR707 Bead Grip 17x7.5 Matte Black Wheel
• 1x Snap-In Center Cap with Embossed METHOD Bead Grip® Logo

Product Description

The Method MR707 Bead Grip in Matte Black brings the rally-inspired design of Method's 407 UTV Bead Grip wheel to the van and overland market - specifically targeting the 6x130mm bolt pattern most commonly found on the Mercedes-Benz Sprinter 2500 and 3500XD. Like its UTV sibling, the MR707 pairs a bold multi-spoke aesthetic with Method's patented Bead Grip® technology, using integrated grooves on both the inner and outer bead seats to engage the tire bead at low air pressures. This allows Sprinter builders and overland van enthusiasts to air down confidently on loose or difficult terrain without the added complexity of traditional beadlock wheels, while remaining fully street legal.

Built from solid A356 aluminum with T6 heat treatment and carrying a robust 3,640 lb. load rating, this 17x7.5 wheel is well-suited to loaded Sprinter builds, camper van conversions, and overland expedition rigs. The +50mm offset and 6.20" backspacing are dialed in specifically for Sprinter platform fitment. Note that Sprinter vans typically require aftermarket cone-seat lug bolts rather than standard lug nuts - always verify your vehicle's lug type before ordering. As a universal product, confirm bolt pattern, hub bore, offset, and brake clearance for your specific vehicle before purchasing.