Method MR70578550500 705 Bead Grip 17x8.5 5x5 0mm Matte Black Wheel JeepWrangler

Vehicle Fitment

• 2007-2018 Jeep Wrangler JK (2-Door and Unlimited 4-Door, All Trims), 5x127mm (5x5")
• 2018-2026 Jeep Wrangler JL (2-Door and Unlimited 4-Door, All Trims), 5x127mm (5x5")
• 2020-2026 Jeep Gladiator JT (All Trims), 5x127mm (5x5")
• 1999-2004 Jeep Grand Cherokee WJ, 5x127mm (5x5")
• 2005-2010 Jeep Grand Cherokee WK, 5x127mm (5x5")
• 2011-2021 Jeep Grand Cherokee WK2, 5x127mm (5x5")
• 2006-2010 Jeep Commander XK, 5x127mm (5x5")

Fitment Notes

• 5x127mm is also expressed as 5x5" - both designations refer to the same bolt pattern
• 71.5mm centerbore is hub-centric for all listed Jeep Wrangler JK, JL, Gladiator JT, Grand Cherokee, and Commander applications - no hubcentric rings required; direct hub-centric fitment on all listed Jeep platforms without additional hardware
• Jeep Wrangler JK (2007-2018) and JL (2018-2026), and Gladiator JT both use M14x1.5 lug nuts - confirm seat type before purchasing separately; lug nuts are not included
• 0mm offset / 4.75" backspacing is the standard neutral-stance fitment for the 17x8.5 Jeep 5x5 platform - suitable for stock-height, leveled, and mildly lifted JK, JL, and Gladiator builds; confirm clearance for your specific trim, suspension, and tire combination before ordering
• The 0mm neutral offset is the most broadly compatible configuration for the Jeep platform - the standard choice for Wrangler and Gladiator builds running 33"-35" all-terrain and mud-terrain tires at stock height or with 2"-3.5" lift kits before more aggressive negative-offset fitments are required
• TPMS sensors are not included - purchase separately if required
• Sold individually - one (1) wheel per listing

Features

• Patented Bead Grip® technology - Method's proprietary knurled inner bead seat texture provides increased tire bead retention at reduced inflation pressures; for Wrangler and Gladiator owners who regularly air down on trails, rock crawls, and off-road terrain, Bead Grip® delivers meaningful tire bead security at pressures where conventional street wheels offer no protection; DOT-approved for all on-road and daily-driven use
• 705 Bead Grip design - the MR705 introduces a distinct design face within Method's Bead Grip lineup, bringing a unique window and spoke pattern optimized for the Jeep 5x5 platform; the 705's design language bridges Method's off-road race heritage and street usability with a face profile specifically proportioned for the Wrangler and Gladiator's broad, upright aesthetic
• Aggressive safety hump on bead seats further prevents de-beading - provides an additional mechanical barrier against tire bead displacement at the reduced pressures common in Wrangler and Gladiator trail use, complementing Bead Grip® for maximum tire security without a mechanical beadlock ring
• Reinforced inner lip taken from Method's race wheel design - provides additional structural reinforcement at the inner barrel edge appropriate for the rock impacts, ledge drops, and hard landings common in JK, JL, and Gladiator off-road use
• 71.5mm centerbore provides hub-centric fitment on all listed Jeep applications without rings - ensures maximum wheel centering precision for vibration-free on-road driving after trail use; a significant practical advantage on the Jeep platform where many competing wheels require rings or are lug-centric
• 17x8.5 at 0mm offset is the natural standard fitment for the Jeep 5x5 platform - the most broadly compatible size and offset combination for the Wrangler and Gladiator, supporting 33"-35" all-terrain and mud-terrain tires across the full range of lift configurations from stock to 3.5" without aggressive clearance requirements
• All-matte black finish - a flat, non-reflective, trail-appropriate appearance that pairs with the full range of Wrangler and Gladiator factory colors; matte black is the most popular and broadly compatible color for the Jeep platform where trail use, dust, and mud make reflective finishes less practical; coordinates naturally with factory Jeep bumpers, skid plates, and off-road accessories
• Snap-in center cap with embossed METHOD Bead Grip® logo - provides finished center section appearance and trail debris protection
• Solid A356 aluminum with T6 heat treatment construction provides reliable structural performance for daily driving, trail use, and rock-crawling applications
• 2,650 lb. load rating for this 5-lug 5x127 configuration
• DOT street-legal - suitable for all on-road, daily-driven, trail, and off-road applications on all listed vehicles
• Covered by Method Race Wheels' Lifetime Structural Warranty

Specifications

• Part Number: MR70578550500
• Model: Method 705 Bead Grip
• Finish: Matte Black
• Wheel Diameter: 17 in
• Wheel Width: 8.5 in
• Bolt Pattern: 5x127mm (5x5")
• Offset: 0mm
• Backspacing: 4.75 in
• Centerbore: 71.5mm
• Load Rating: 2,650 lbs
• Construction: Solid A356 aluminum, T6 heat treated
• Center Cap: Snap-in with embossed METHOD Bead Grip® logo
• Warranty: Lifetime Structural

Included Components

• 1x Method 705 Bead Grip Wheel - 17x8.5, 5x127, 0mm, Matte Black
• 1x Snap-in center cap with embossed METHOD Bead Grip® logo

Product Description

The Method 705 Bead Grip in Matte Black (P/N MR70578550500) is the standard neutral-stance configuration of the MR705 for the Jeep Wrangler and Gladiator 5x5 platform - the 17x8.5 / 5x127 / 0mm fitment covering the Wrangler JK (2007-2018), JL (2018-2026), Gladiator JT (2020-2026), and Grand Cherokee across WJ, WK, and WK2 generations. The MR705 combines Method's Patented Bead Grip® tire retention technology with a design face distinct from the MR701 and MR703, providing Jeep owners with a third Bead Grip® design option optimized for the Wrangler and Gladiator's visual character. The 71.5mm centerbore provides hub-centric fitment on all listed Jeep applications without rings.

At 0mm offset and 4.75-inch backspacing the MR70578550500 is the most broadly compatible configuration in the MR705 Jeep lineup - the natural starting point for JK and JL Wrangler builds running 33"-35" all-terrain tires at stock height or with 2"-3.5" lift kits, and equally appropriate for Gladiator JT builds where the slightly longer wheelbase makes moderate offset fitments the preferred starting configuration. The Bead Grip® inner bead seat adds meaningful tire retention at the 12-18 PSI pressures commonly used on Wrangler and Gladiator trail outings, providing practical protection against de-beading without the weight, beadlock ring hardware, or DOT restrictions of a mechanical beadlock. The all-matte black finish coordinates naturally with factory Jeep bumpers, skid plates, and rock rails across all listed JK, JL, and Gladiator trim combinations.

Jeep Wrangler JK, JL, and Gladiator JT all use M14x1.5 lug nuts - confirm seat type before purchasing separately. Lug nuts not included. Covered by Method Race Wheels' Lifetime Structural Warranty.