Method MR70378558935 703 Bead Grip 17x8.5 5x150 +35mm Bronze Wheel Toyota Tundra

Vehicle Fitment

• 2007-2021 Toyota Tundra (2WD and 4WD, All Trims including TRD Pro), 5x150mm
• 2008-2022 Toyota Sequoia (2WD and 4WD, All Trims), 5x150mm
• 1998-2021 Toyota Land Cruiser 100 Series and 200 Series (All Trims), 5x150mm
• 1998-2007 Lexus LX470 (All Trims), 5x150mm
• 2008-2021 Lexus LX570 (All Trims), 5x150mm

Fitment Notes

• The 2022 and newer Toyota Tundra and 2023 and newer Toyota Sequoia switched to a 6x139.7mm bolt pattern and are NOT compatible with this wheel
• 110.5mm centerbore is effectively hub-centric on all listed Toyota and Lexus 5x150 applications (factory hub bore 110mm); the 0.5mm differential is negligible in practice; confirm fitment for your specific application before installation
• +35mm offset / approximately 5.9" backspacing is a moderately inboard stance - places the wheel more inboard than the 0mm variant, producing a clean OEM-adjacent visual appearance well-suited to stock-height and mildly leveled Tundra, Sequoia, and Land Cruiser builds; confirm clearance for your specific trim, suspension, and tire combination before ordering
• The +35mm inboard offset at 17x8.5 provides more inner suspension clearance than 0mm or negative offset setups, making this the preferred configuration for stock-height builds where avoiding fender or suspension contact with wider tires is a priority
• Toyota Tundra, Sequoia, and Land Cruiser require aftermarket conical-seat lug nuts - factory flat-seat lug nuts are NOT compatible with this wheel; most listed applications use M14x1.5 thread pitch; confirm before purchasing separately; lug nuts are not included
• TPMS sensors are not included - purchase separately if required
• Sold individually - one (1) wheel per listing

Features

• Patented Bead Grip® technology - Method's proprietary knurled inner bead seat texture provides increased tire bead retention at reduced inflation pressures; for Tundra and Land Cruiser owners who trail-drive, overland, or air down on gravel and sand, Bead Grip® delivers DOT-approved tire bead security without beadlock weight or complexity; functions identically to a conventional street wheel at normal inflation pressures
• Iconic multi-window design with debossed METHOD logo - the MR703's contemporary multi-window face design references Method's off-road heritage with a modern visual language; in the Method Bronze® finish the warm, earthy bronze tone interacts with the multi-window spoke geometry to create depth and light variation across the face that the matte black variant achieves only through shadow
• Method Bronze® finish - Method's signature warm, earthy bronze powder coat that has defined the brand's visual identity; on the second-generation Tundra and Land Cruiser 200 platform the bronze finish creates a particularly effective aesthetic - the warm amber-brown tone complements the Tundra's factory color palette across Super White, Magnetic Grey, Midnight Black, and the TRD Pro exclusive Army Green and Cavalry Blue colorways; the bronze is especially well-suited to Army Green and Cavalry Blue TRD Pro Tundra builds where the warm earth tone creates a cohesive, outdoor-inspired palette
• +35mm offset / inboard stance is the OEM-adjacent fitment choice for the 5x150 Tundra and Sequoia platform - the moderately inboard position of +35mm creates a cleaner, more factory-proportional visual stance than 0mm or negative offset configurations while still providing a noticeable upgrade over the typically higher positive-offset factory Tundra wheels; this is the preferred configuration for stock-height and leveled Tundra builds running 265/70R17 or 275/70R17 tires
• Aggressive safety hump on bead seats further prevents de-beading - complementing Bead Grip® for maximum tire security at reduced pressures on Tundra TRD Pro and Land Cruiser trail applications
• Reinforced inner lip taken from Method's race wheel design - additional structural reinforcement at the inner barrel edge appropriate for the trail demands of Tundra TRD Pro and Land Cruiser builds
• 110.5mm centerbore provides effectively hub-centric fitment on all listed Toyota and Lexus 5x150 applications
• Snap-in center cap with embossed METHOD Bead Grip® logo
• Solid A356 aluminum with T6 heat treatment construction
• 2,650 lb. load rating for this 5-lug 5x150 configuration
• DOT street-legal - covered by Method Race Wheels' Lifetime Structural Warranty

Specifications

• Part Number: MR70378558935
• Model: Method 703 Bead Grip
• Finish: Method Bronze®
• Wheel Diameter: 17 in
• Wheel Width: 8.5 in
• Bolt Pattern: 5x150mm
• Offset: +35mm
• Backspacing: 5.9 in (approx.)
• Centerbore: 110.5mm
• Load Rating: 2,650 lbs
• Construction: Solid A356 aluminum, T6 heat treated
• Center Cap: Snap-in with embossed METHOD Bead Grip® logo
• Warranty: Lifetime Structural

Included Components

• 1x Method 703 Bead Grip Wheel - 17x8.5, 5x150, +35mm, Method Bronze®
• 1x Snap-in center cap with embossed METHOD Bead Grip® logo

Product Description

The Method 703 Bead Grip in Method Bronze® (P/N MR70378558935) is the warm-finish inboard-stance configuration of the MR703 for the Toyota 5x150 platform - the 17x8.5 / 5x150 / +35mm variant covering the Toyota Tundra (2007-2021), Sequoia (2008-2022), Land Cruiser 100/200, and Lexus LX470/570 in Method's signature bronze powder coat. The +35mm offset places this wheel in the moderately inboard, OEM-adjacent stance that works cleanly at stock height across all listed Tundra and Sequoia trims - providing a clean visual upgrade over factory wheels without the outboard poke of 0mm or negative offset configurations, and delivering more inner suspension clearance for stock-geometry setups running 265/70R17 or 275/70R17 tires. The 110.5mm centerbore provides effectively hub-centric fitment without rings.

The Method Bronze® finish on the second-generation Tundra has strong cultural presence in the Toyota community - the warm, earthy bronze tone is particularly effective on TRD Pro builds in Army Green and Cavalry Blue, where the color creates a cohesive outdoor palette that both finishes reinforce. The MR703's contemporary multi-window design in bronze reads as purposeful and adventure-oriented, distinguishing it from the cleaner neutral aesthetic of the matte black variant and the bright reflective character of the gloss titanium finish. For Tundra owners who want Bead Grip® trail capability in the Method Bronze® finish at a stock-height-friendly inboard offset, this is the specific configuration built for that use case.

The 2022+ Tundra and 2023+ Sequoia switched to 6x139.7 and are NOT compatible. Toyota flat-seat lug nuts not compatible; M14x1.5 conical-seat lug nuts required and sold separately. Lug nuts not included. Covered by Method Race Wheels' Lifetime Structural Warranty.