Method MR41457012552 414 UTV Bead Grip 15x7 5x114.3 +38mm Matte Black Polaris

Vehicle Fitment

The 5x114.3 (5x4.5") bolt pattern in UTV applications is used on competition-spec side-by-sides and UTVs running automotive-style hubs, including:

• Polaris RZR R (All Competition Variants), 5x114.3mm
• Honda Pioneer 1000 and 1000-5 (select configurations), 5x114.3mm
• Custom and competition UTV race builds with automotive 5x114.3 hub conversions
• Performance UTV platforms adapted from automotive hubs - confirm your specific vehicle's bolt pattern before ordering

Fitment Notes

• 5x114.3mm is also expressed as 5x4.5" - both designations refer to the same bolt pattern
• 76mm centerbore - confirm clearance on your specific application before installation; note this differs slightly from the 78mm centerbore used on the MR412 5x114.3 variants
• 5+2 / +38mm offset expresses front backspacing (5") and rear spacing (2"), corresponding to +38mm in standard automotive offset measurement; this is the high-offset (inboard) configuration providing a moderate inboard stance appropriate for stock and standard-width applications
• This wheel does NOT include a beadlock ring or beadlock hardware - the MR414 uses Method's Patented Bead Grip® technology only; if a mechanical beadlock ring is required for your application, refer to the MR412 series
• Lug nuts are not included - confirm the correct lug nut specification for your specific application before purchasing separately; OEM lug nuts may not be compatible with this wheel
• This wheel is NOT DOT approved - for off-road, UTV, and race use only; not legal for highway or public road use
• Sold individually - one (1) wheel per listing

Features

• Patented Bead Grip® technology - Method's proprietary knurled inner bead seat texture engages the tire bead at the inner lip, increasing friction and grip between the tire bead and the wheel seat at low inflation pressures; Bead Grip® allows safe operation at lower pressures than a conventional wheel without a mechanical beadlock ring, providing meaningfully enhanced tire retention for trail riding, rock crawling, and sand applications where reduced pressure improves traction; the MR414 delivers this protection without the weight, cost, and installation complexity of a beadlock ring
• Aggressive safety hump on bead seats further prevents de-beading - the raised safety humps provide an additional mechanical barrier against tire bead displacement under extreme lateral loads and low inflation pressure conditions
• Reinforced inner lip taken from Method's race wheel design - the inner lip geometry is directly derived from Method's competition race wheels, providing additional structural reinforcement at the inner barrel edge
• 15x7 / 5+2 / +38mm high-offset format - the inboard 5+2 configuration with 5.33-inch backspacing is appropriate for stock and standard-width Polaris RZR R and other 5x114.3 UTV builds where maintaining factory track width and suspension geometry is the priority; supports the popular 28-32-inch tire sizes used on competition RZR R applications
• All-matte black finish - a flat, non-reflective, practical finish for UTV competition use that resists showing trail contamination and pairs with the full range of RZR R and competition UTV color schemes
• Snap-in center cap with embossed METHOD logo included - protects the center bore from trail debris, mud, and water ingress
• Solid A356 aluminum with T6 heat treatment construction - provides reliable structural performance for UTV racing and off-road applications within the rated load capacity
• 1,600 lb. load rating per wheel
• Available in multiple bolt pattern and offset configurations - the MR414 family covers 4x136, 4x156, and 5x114.3 bolt patterns in 4+3 and 5+2 offsets; see the full MR414 lineup for additional configurations

Specifications

• Part Number: MR41457012552
• Model: Method 414 UTV Bead Grip
• Finish: Matte Black
• Wheel Diameter: 15 in
• Wheel Width: 7 in
• Bolt Pattern: 5x114.3mm (5x4.5")
• Offset: 5+2 / +38mm
• Backspacing: 5.33 in
• Centerbore: 76mm
• Load Rating: 1,600 lbs
• Technology: Patented Bead Grip® (no beadlock ring)
• Construction: One-piece cast A356 aluminum, T6 heat treated
• Street/Highway Use: NOT DOT approved - off-road and UTV use only
• Warranty: No structural or cosmetic warranty - Race and UTV Series wheels are for off-road use only and are excluded from Method Race Wheels' standard warranty coverage

Included Components

• 1x Method 414 UTV Bead Grip Wheel - 15x7, 5x114.3, +38mm (5+2), Matte Black
• 1x Snap-in center cap with embossed METHOD logo

Product Description

The Method 414 UTV Bead Grip in Matte Black (P/N MR41457012552) is the 5x114.3 high-offset configuration of the MR414 for competition UTV applications - the 15x7 / 5x114.3 / 5+2 (+38mm) format covering the Polaris RZR R and other 5x114.3 UTV platforms. The MR414 delivers Method's Patented Bead Grip® technology in a lighter, simpler package than the beadlock MR401 and MR412 series - the knurled inner bead seat engages the tire bead at reduced inflation pressures, providing meaningful tire retention enhancement over a conventional wheel without the added weight, hardware, and installation complexity of a mechanical beadlock ring. For RZR R applications running 8-12 PSI on trail and desert terrain where tire de-beading is a concern but full beadlock weight is not justified, the MR414 Bead Grip is the efficient intermediate solution.

The 5+2 / +38mm high-offset configuration at 5.33-inch backspacing positions the wheel in the inboard moderate stance appropriate for stock-geometry Polaris RZR R builds, maintaining factory track width and CV axle clearance while providing a clean upgrade over factory wheels. The 5x114.3 bolt pattern is specific to the RZR R's automotive-style hub design and is distinct from the 4x156 pattern used on standard Polaris RZR models - confirm your specific vehicle uses this bolt pattern before ordering. The 76mm centerbore is specific to the MR414 in this bolt pattern configuration.

This wheel is NOT DOT approved and is for off-road and UTV use only. Race and UTV Series wheels are excluded from Method Race Wheels' standard structural and cosmetic warranty coverage. Lug nuts are not included.