Method MR323785601300 323 17x8.5 6x5.5 0mm Gloss Black Wheel Toyota Tacoma

Vehicle Fitment

• 2005-2024 Toyota Tacoma (2WD and 4WD, All Trims), 6x139.7mm
• 2003-2026 Toyota 4Runner (2WD and 4WD, All Trims), 6x139.7mm
• 2022-2026 Toyota Tundra (2WD and 4WD, All Trims), 6x139.7mm
• 2024-2026 Toyota Land Cruiser 250 (LC250, All Trims), 6x139.7mm
• 2003-2009 Toyota FJ Cruiser (4WD, All Trims), 6x139.7mm
• 2001-2007 Toyota Sequoia (2WD and 4WD, All Trims), 6x139.7mm
• 2003-2023 Lexus GX (2WD and 4WD, All Trims), 6x139.7mm
• 2021-2026 Ford Bronco (All Trims), 6x139.7mm
• 2019-2023 Ford Ranger (2WD and 4WD, All Trims), 6x139.7mm
• 1999-2018 Chevrolet Silverado 1500 (2WD and 4WD), 6x139.7mm
• 2000-2026 Chevrolet Tahoe, Suburban, and Avalanche (2WD and 4WD), 6x139.7mm
• 2004-2012 Chevrolet Colorado (2WD and 4WD), 6x139.7mm
• 1999-2018 GMC Sierra 1500 (2WD and 4WD), 6x139.7mm
• 2000-2026 GMC Yukon and Yukon XL (2WD and 4WD), 6x139.7mm
• 2000-2026 Cadillac Escalade (2WD and 4WD), 6x139.7mm
• 2004-2021 Nissan Titan (2WD and 4WD), 6x139.7mm
• 2005-2021 Nissan Frontier (2WD and 4WD), 6x139.7mm
• 2003-2017 Nissan Armada (2WD and 4WD), 6x139.7mm
• 2005-2021 Nissan Pathfinder (2WD and 4WD), 6x139.7mm
• 2006-2010 Hummer H3 and H3T, 6x139.7mm

Fitment Notes

• Bolt pattern 6x5.5 is also expressed as 6x139.7mm - both designations refer to the same fitment
• 106.25mm centerbore is hub-centric for Toyota Tacoma, 4Runner, FJ Cruiser, Lexus GX, and pre-2022 Sequoia applications (factory hub bore approximately 106.1mm); no hubcentric rings required for these Toyota and Lexus applications
• 106.25mm centerbore is lug-centric for Chevrolet/GMC, Cadillac, Nissan, Ford Bronco, and Ford Ranger applications - hubcentric rings are recommended for all non-Toyota applications to prevent vibration; confirm the correct ring size for your specific vehicle before installation
• 0mm offset / 4.75" backspacing is the standard neutral-stance fitment for the 17x8.5 6x139.7 segment - appropriate for stock-height and mildly lifted builds across all listed platforms; confirm clearance for your specific trim, suspension, and tire combination before ordering
• Toyota Tacoma, 4Runner, Tundra, and most listed Toyota vehicles require aftermarket conical-seat lug nuts - factory flat-seat lug nuts are NOT compatible with this wheel; lug nuts are not included
• Ford Bronco and Ranger use M14x1.5; Chevy/GMC and Cadillac use M14x1.5; Nissan applications vary by model year - confirm thread pitch and seat type before purchasing separately; lug nuts are not included
• 2019+ Chevrolet Silverado 1500 and GMC Sierra 1500 switched to 6x139.7 - confirm compatibility with your specific year and trim before ordering
• TPMS sensors are not included - purchase separately if required
• Sold individually - one (1) wheel per listing

Features

• Modernized 12-window design - the MR323 delivers a fresh evolution of Method's iconic 12-window aesthetic that has defined the brand's off-road identity since the MR305 NV; the 323's updated spoke geometry, window proportions, and face profile introduce a contemporary design direction that respects the 12-window heritage while adding modern character; builders who want the proven look of a 12-window Method wheel in a refreshed, current-generation format will find the MR323 the most up-to-date expression of that design language
• Gloss Black finish - a deep, high-gloss black with full reflective quality across the wheel face, spoke surfaces, and lip; on the MR323's 12-window face the gloss finish creates natural light and shadow variation across the spoke surfaces and open windows as the wheel rotates, producing a premium dynamic appearance that distinguishes this finish from the flat matte alternatives in the lineup
• Gloss Black on the 12-window design is the most high-contrast color option in the MR323 lineup - the deep reflective black creates a bold, assertive visual statement across all vehicle colors, most effective on lighter-colored Tacoma and 4Runner builds in Super White, Lunar Rock, Quicksand, and Cement where the dark glossy wheel creates strong visual separation from the body
• TOPO center cap with embossed METHOD logo - the MR323 uses Method's TOPO cap design, connecting this evolved 12-window design to Method's modern street and UTV series; the clean, low-profile TOPO cap complements the updated face geometry
• 106.25mm centerbore provides hub-centric fitment on Toyota Tacoma, 4Runner, FJ Cruiser, and Lexus GX without hubcentric rings - the primary practical fitment advantage on the Toyota-dominant 6x5.5 platform
• 17x8.5 at 0mm offset is the standard neutral-stance full-width fitment for the 6x5.5 platform - supports 265/70R17, 275/70R17, and 285/70R17 all-terrain tire sizes at stock and mildly lifted heights across Tacoma and 4Runner applications
• Available in Gloss Black and Gloss Bronze - the Gloss Bronze variant (MR323785601500) provides a warm, two-tone alternative for builders who prefer Method's signature earthy bronze colorway
• Solid one-piece cast A356 aluminum construction with T6 heat treatment provides reliable structural performance for daily driving and mixed-use applications across all listed platforms
• 2,650 lb. load rating for this 6-lug 6x139.7 configuration
• DOT street-legal - suitable for all on-road, daily-driven, and mixed-use applications on all listed vehicles
• Covered by Method Race Wheels' Lifetime Structural Warranty

Specifications

• Part Number: MR323785601300
• Model: Method 323
• Finish: Gloss Black
• Wheel Diameter: 17 in
• Wheel Width: 8.5 in
• Bolt Pattern: 6x139.7mm (6x5.5")
• Offset: 0mm
• Backspacing: 4.75 in
• Centerbore: 106.25mm
• Load Rating: 2,650 lbs
• Construction: One-piece cast A356 aluminum, T6 heat treated
• Center Cap: TOPO cap with embossed METHOD logo
• Warranty: Lifetime Structural

Included Components

• 1x Method 323 Wheel - 17x8.5, 6x139.7, 0mm, Gloss Black
• 1x TOPO center cap with embossed METHOD logo

Product Description

The Method 323 in Gloss Black (P/N MR323785601300) is Method's modern evolution of the iconic 12-window design - the 17x8.5 / 6x5.5 / 0mm configuration covering the Toyota Tacoma, 4Runner, Tundra, and LC250, along with the Ford Bronco, Chevrolet Silverado 1500, GMC Sierra 1500, Nissan Titan, and the full 6x5.5 truck and SUV range. The MR323 delivers a fresh face lift to the classic 12-window aesthetic that has defined Method's off-road identity since the MR305 NV - the same fundamental open 12-window design language updated with modernized spoke geometry, refined window proportions, and the current-generation TOPO center cap that connects the 323 to Method's newest street and UTV series designs. The 106.25mm centerbore provides hub-centric fitment on all listed Toyota and Lexus applications without rings.

The Gloss Black finish on the MR323's 12-window face creates the most high-contrast and visually assertive color option in the 323 lineup - the deep, reflective gloss black surface produces natural light variation across the spoke faces and window openings that gives the wheel a dynamic, premium appearance in all lighting conditions. For builders who appreciate the proven 12-window design heritage but want a contemporary finish and modern center cap execution, the Gloss Black MR323 provides an evolution rather than a reinvention - familiar in proportion and layout, but updated in detail and character. It is particularly effective on lighter-colored Tacoma and 4Runner builds where the deep glossy black creates strong visual separation from the body.

Toyota factory flat-seat lug nuts are not compatible; aftermarket conical-seat lug nuts required. Confirm thread pitch and seat type for your specific vehicle before purchasing separately. Lug nuts not included. Covered by Method Race Wheels' Lifetime Structural Warranty.